Computers and Concrete

  • 제22권3호
  • /
  • Pages.305-317
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Finite element models of reinforced ECC beams subjected to various cyclic deformation

  • Frank, Timothy E. (Headquarters Air Force) ;
  • Lepech, Michael D. (Department of Civil and Environmental Engineering, Stanford University) ;
  • Billington, Sarah L. (Department of Civil and Environmental Engineering, Stanford University)
  • 투고 : 2017.07.25
  • 심사 : 2018.08.31
  • 발행 : 2018.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Steel reinforced Engineered Cementitious Composite (ECC) components have been proposed for seismic structural applications, for example in coupling beams, infill panels, joints, columns, and flexural members. The development of strain in the steel reinforcement of cementitious components has been shown to vary based on both the steel reinforcement ratio and the applied deformation history. Strain in the steel reinforcement of reinforced ECC components is an important structural response metric because ultimate failure is often by fracture of the steel reinforcement. A recently proposed bond-slip model has been successfully calibrated to cyclically tested reinforced ECC beams wherein the deformation history contained monotonically increasing cycles. This paper reports simulations of two-dimensional finite element models of reinforced ECC beams to determine the appropriateness and significance of altering a phenomenological bond-slip model based on the applied deformation history. The numerical simulations with various values of post-peak bond-slip softening stiffness are compared to experimental results. Varying the post-peak bond-slip softening stiffness had little effect on the cracking patterns and hysteretic response of the reinforced ECC flexural models tested, which consisted of two different steel reinforcement ratios subjected to two different deformation histories. Varying the post-peak bond-slip softening stiffness did, however, affect the magnitude of strain and the length of reinforcing bar that strain-hardened. Overall, a numerical model with a constant bond-slip model represented well various responses in reinforced ECC beams with multiple steel reinforcement ratios subjected to different deformation histories.

키워드

참고문헌

  1. Bandelt, M.J. (2015), "Behavior, modeling, and impact of bond in steel reinforced high-performance fiber-reinforced cementbased composites", Ph.D. Dissertation, Stanford University, California.
  2. Bandelt, M.J. and Billington, S.L. (2016a), "Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members", Mater. Struct., 49(1), 71-86. https://doi.org/10.1617/s11527-014-0475-4
  3. Bandelt, M.J. and Billington, S.L. (2016b), "Impact of reinforcement ratio and loading type on the deformation capacity of high-performance fiber-reinforced cementitious composites reinforced with mild steel", J. Struct. Eng., 04016084.
  4. Bandelt, M.J., Frank, T.E., Lepech, M.D. and Billington, S.L. (2017), "Bond behavior and interface modeling of high-performance fiber-reinforced cementitious composites", Cement Concrete Compos., 83, 188-201. https://doi.org/10.1016/j.cemconcomp.2017.07.017
  5. Cunha, V.M.C.F., Barros, J.O.A. and Sena-Cruz, J.M. (2012), "A finite element model with discrete embedded elements for fibre reinforced composites", Comput. Struct., 94-95, 22-33. https://doi.org/10.1016/j.compstruc.2011.12.005
  6. FEMA 461 (2007), Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components, Applied Technology Council, Redwood City, CA, USA.
  7. Frank, T.E. (2017), "Response of reinforced engineered cementitious composite flexural members subjected to various cyclic deformation histories", Ph.D. Dissertation, Stanford University, California.
  8. Frank, T.E., Lepech, M.D. and Billington, S.L. (2017), "Experimental testing of reinforced concrete and reinforced ECC flexural members subjected to various cyclic deformation histories", Mater. Struct., 50(232), 1-12. https://doi.org/10.1617/s11527-016-0885-6
  9. Frank, T.E., Lepech, M.D. and Billington, S.L. (2018), "Experimental testing of reinforced ECC beams subjected to various cyclic deformation histories", J. Struct. Eng., 144(6), 04018052. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002034
  10. Han, T.S., Feenstra, P.H. and Billington, S.L. (2003), "Simulation of highly ductile fiber-reinforced cement-based composite components under cyclic loading", ACI Struct. J., 100(6), 749-757.
  11. Harajli, M., Hamad, B. and Karam, K. (2002), "Bond-slip response of reinforcing bars embedded in plain and fiber concrete", J. Mater. Civil Eng., 14(6), 503-511. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:6(503)
  12. Hung, C.C. and El-Tawil, S. (2010), "Hybrid rotating/fixed-crack model for high-performance fiber-reinforced cementitious composites", ACI Mater. J., 107(6), 568-576.
  13. Kaufmann, W. and Marti, P. (1998), "Structural concrete: cracked membrane model", J. Struct. Eng., 124(12), 1467-1475. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1467)
  14. Kwak, H.G. and Filippou, F.C. (1990), "Finite element analysis of reinforced concrete structures under monotonic loads", Technical Report, University of California, Berkeley Report No. UCB/SEMM-90/14, Berkeley, California.
  15. Leon, R.T. and Deierlein, G.G. (1996), "Considerations for the use of quasi-static testing", Earthq. Spectra, 12(1), 87-109. https://doi.org/10.1193/1.1585869
  16. Li, V.C. and Kanda, T. (1998), "Engineered cementitious composites for structural applications", ASCE J. Mater. Civil Eng., 10(2), 66-69. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:2(66)
  17. Maalej, M. and Li, V.C. (1995), "Introduction of strain-hardening engineered cementitious composites in design of reinforced concrete flexural members for improved durability", ACI Struct. J., 92(2), 167-176.
  18. Moreno-Luna, D.M. (2014), "Tension stiffening in reinforced high performance fiber reinforced cement based composites", Ph.D. Dissertation, Stanford University, California.
  19. Moreno, D.M., Trono, W., Jen, G., Ostertag, C. and Billington, S.L. (2014), "Tension stiffening in reinforced high performance fiber reinforced cement-based composites", Cement Concrete Compos., 50, 36-46. https://doi.org/10.1016/j.cemconcomp.2014.03.004
  20. Radtke, F.K.F., Simone, A. and Sluys, L.J. (2010), "A computational model for failure analysis of fibre reinforced concrete with discrete treatment of fibres", Eng. Fract. Mech., 77(4), 597-620. https://doi.org/10.1016/j.engfracmech.2009.11.014
  21. Shen, C., Mizuno, E. and Usami, T. (1993), "A generalized twosurface model for structural steels under cyclic loading", Struct. Eng. Mech., 10(2), 59-69.
  22. Soranakom, C. and Mobasher, B. (2007), "Closed-form solutions for flexural response of fiber-reinforced concrete beams", J. Eng. Mech., 133(8), 933-941. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:8(933)
  23. Stavridis, A. and Shing, P.B. (2010), "Finite-element modeling of nonlinear behavior of masonry-infilled RC frames", J. Struct. Eng., 136(3), 285-296. https://doi.org/10.1061/(ASCE)ST.1943-541X.116