Computers and Concrete

  • 제22권3호
  • /
  • Pages.291-303
  • /
  • 2018
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental study on the dynamic behavior of pervious concrete for permeable pavement

  • Bu, Jingwu (School of Hydraulic Energy and Power Engineering, Yangzhou University) ;
  • Chen, Xudong (College of Civil and Transportation Engineering, Hohai University) ;
  • Liu, Saisai (College of Civil and Transportation Engineering, Hohai University) ;
  • Li, Shengtao (College of Civil and Transportation Engineering, Hohai University) ;
  • Shen, Nan (College of Civil and Transportation Engineering, Hohai University)
  • 투고 : 2017.02.21
  • 심사 : 2018.09.11
  • 발행 : 2018.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

As the concept of "sponge city" is proposed, the pervious concrete for permeable pavement has been widely used in pavement construction. This paper aims at investigating the dynamic behavior and energy evolution of pervious concrete under impact loading. The dynamic compression and split tests are performed on pervious concrete by using split Hopkinson pressure bar equipment. The failure criterion on the basis of incubation time concept is used to analyze the dynamic failure. It is demonstrated that the pervious concrete is of a strain rate sensitive material. Under high strain rate loading, the dynamic strength increases while the time to failure approximately decreases linearly as the strain rate increases. The predicted dynamic compressive and split tensile strengths based on the failure criterion are in accordance with the experimental results. The total damage energy is found to increase with the increasing of strain rate, which means that more energy is needed to produce irreversible damage as loading rate increases. The fractal dimensions are observed increases with the increasing of impact loading rate.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. ACI 522R (2010), Report on Pervious Concrete, ACI 522R-10, American Concrete Institute.
  2. Brara, A. and Klepaczko, J.R. (2006), "Experimental characterization of concrete in dynamic tension", Mech. Mater., 38(3), 253-267. https://doi.org/10.1016/j.mechmat.2005.06.004
  3. Cadoni, E., Asprone, D. and Prota, A. (2007), "High strain rate testing of concrete and steel for the assessment of the Tenza Bridge under blast loading", Fracture Mechanics of Concrete and Concrete Structures- New Tends in Fracture Mechanics of Concrete, Taylor & Francis Group, London.
  4. Chen, T. et al. (2013), "Research on rock energy evolution in the process of impact compression failure", Chin. J. Underg. Space Eng., 9(s1), 1477-1482. (in Chinese)
  5. Chen, X., Ge, L. and Yuan, H. (2016a), "Effect of pre-static loading on dynamic tensile strength of concrete under high strain rates", ASCE J. Mater. Civil Eng., 28(12), 06016018. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001698
  6. Chen, X., Ge, L., Chen, C. and Xu, L. (2016b), "Influence of initial static splitting tensile loading on dynamic compressive strength of concrete cores under high strain rates", ASCE J. Perform. Constr. Facil., 30(6), 06016002. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000900
  7. Chen, X., Ge, L., Zhou, J. and Wu, S. (2017), "Dynamic Brazilian test of concrete using split Hopkinson pressure bar", Mater. Struct., 50(1), 1-15. https://doi.org/10.1617/s11527-016-0885-6
  8. Chen, X.D., Wu, S.X. and Zhou, J.K. (2014), "Experimental study on dynamic tensile strength of cement mortar using split Hopkinson pressure bar technique", ASCE J. Mater. Civil Eng., 26(6), 04014005. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000926
  9. Chen, X.D., Wu, S.X. and Zhou, J.K. (2015), "Compressive strength of concrete cores under high strain rates", J. Perform. Constr. Facil., 29(1), 06014005. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000586
  10. Comite Euro-International du Beton (1993), CEB-FIP Model Code 1990, Redwood Books, Trowbridge, Wiltshire, UK.
  11. De Andrade Silva, F., Butler, M., Mechtcherine, V., Zhu, D. and Mobasher, B. (2011), "Strain rate effects on the tensile behavior of textile-reinforced concrete under static and dynamic loading", Mater. Sci. Eng. A, 528(3), 1727-1734. https://doi.org/10.1016/j.msea.2010.11.014
  12. Erzar, B. and Forquin, P. (2010), "An experimental method to determine the tensile strength of concrete under high rates of strain", Exp. Mech., 50(7), 941-955. https://doi.org/10.1007/s11340-009-9284-z
  13. Fu, Q., Xie, Y., Long, G., Niu, D., Song, H. and Liu, X. (2017), "Impact characterization and modelling of cement and asphalt mortar based on SHPB experiments", Int. J. Impact Eng., 106, 44-52. https://doi.org/10.1016/j.ijimpeng.2017.03.009
  14. Hao, H., Hao, Y. and Li, Z.X. (2009), "A numerical study of factors influencing high-speed impact tests of concrete material properties", Keynote in Proceedings of the 8th International Conference on Shock and Impact Loads on Structures, CIPremier Pte Ltd., Adelaide.
  15. Joshaghani, A., Ramezanianpour, A.A., Ataei, O. and Golroo, A. (2015), "Optimizing pervious concrete pavement mixture design by using the Taguchi method", Constr. Build. Mater., 101, 317-325. https://doi.org/10.1016/j.conbuildmat.2015.10.094
  16. Kuo, W.T., Liu, C.C. and Su, D.S. (2013), "Use of washed municipal solid waste incinerator bottom ash in pervious concrete", Cement Concrete Compos., 37, 328-335. https://doi.org/10.1016/j.cemconcomp.2013.01.001
  17. Li, J.C., Li, N.N., Li, H.B. and Zhao, J. (2017), "An SHPB test study on wave propagation across rock masses with different contact area ratios of joint", Int. J. Impact Eng., 105, 109-116. https://doi.org/10.1016/j.ijimpeng.2016.12.011
  18. Li, L. and Aubertin, M. (2003), "A general relationship between porosity and uniaxial strength of engineering materials", Can. J. Civil Eng., 30(4), 644-658. https://doi.org/10.1139/l03-012
  19. Lian, C. and Zhuge, Y. (2010), "Optimum mix design of enhanced permeable concrete-an experimental investigation", Constr. Build. Mater., 24(12), 2664-2671. https://doi.org/10.1016/j.conbuildmat.2010.04.057
  20. Lian, C., Zhuge, Y. and Beecham, S. (2011), "The relationship between porosity and strength for porous concrete", Constr. Build. Mater., 25(11), 4294-4298. https://doi.org/10.1016/j.conbuildmat.2011.05.005
  21. Monters, F. (2006), "Pervious concrete: characterization of fundamental properties and simulation of microstructure", PhD Dissertation, University of south Carolina, USA.
  22. Nagahama, H. (1993), "Fractal fragment size distribution for brittle rocks", Int. J. Rock Mech. Min. Sci. Geomech. Abs., 30(4), 469-471. https://doi.org/10.1016/0148-9062(93)91728-2
  23. Novo, A.V., Bayon, J.R., Castro-Fresno, D. and Rodriguez-Hernandez, J. (2013), "Temperature performance of different pervious pavements: Rainwater harvesting for energy recovery purposes", Water Resour. Manage., 27(15), 5003-5016.
  24. Ozbek, A.S.A., Weerheijm, J., Schlangen, E. and van Breugel, K. (2013), "Dynamic behavior of porous concretes under drop weight impact testing", Cement Concrete Compos., 39, 1-11. https://doi.org/10.1016/j.cemconcomp.2013.03.012
  25. Petrov, Y.V. and Utkin, A.A. (1989), "Dependence of the dynamic strength on loading rate", Mater. Sci., 25(2), 153-156. https://doi.org/10.1007/BF00780499
  26. Petrov, Y.V., Smirnov, I.V. and Utkin, A.A. (2010), "Effects of strain-rate strength dependence in nanosecond load duration range", Mech. Solid., 45(3), 476-484. https://doi.org/10.3103/S0025654410030179
  27. Rehder, B., Banh, K. and Neithalath, N. (2014), "Fracture behavior of pervious concretes: the effects of pore structure and fibers", Eng. Fract. Mech., 118, 1-16. https://doi.org/10.1016/j.engfracmech.2014.01.015
  28. Rossi, P., van Mier, J.G.M., Toutlemonde, F., Le Maou, F. and Fabrice Boulay, C. (1994), "Effect of loading rate on the strength of concrete subjected to uniaxial tension", Mater. Struct., 27(5), 260-264. https://doi.org/10.1007/BF02473042
  29. Shen, W., Shan, L., Zhang, T., Ma, H., Cai, Z. and Shi, H. (2013), "Investigation on polymer-rubber aggregate modified porous concrete", Constr. Build. Mater., 38, 667-674. https://doi.org/10.1016/j.conbuildmat.2012.09.006
  30. Sumanasooriya, M.S. and Neithalath, N. (2011), "Pore structure features of pervious concretes proportioned for desired porosities and their performance prediction", Cement Concrete Compos., 33(8), 778-787. https://doi.org/10.1016/j.cemconcomp.2011.06.002
  31. Tian, Z. et al. (2016), "Effect of strain rate and moisture content on dynamic mechanical behaviours of mortar", Int. J. Pavement Eng., 17(9), 789-798. https://doi.org/10.1080/10298436.2015.1019499
  32. Torres, A., Hu, J and Ramos, A. (2015), "The effect of the cementitious paste thickness on the performance of pervious concrete", Constr. Build. Mater., 95, 850-859. https://doi.org/10.1016/j.conbuildmat.2015.07.187
  33. Volder, A., Watson, T. and Viswanathan, B. (2009), "Potential use of pervious concrete for maintaining existing mature trees during and after urban development", Urban Forest Urban Green., 8(4), 249-256. https://doi.org/10.1016/j.ufug.2009.08.006
  34. Weerheijm J. (2016), "Design and analyses of porous concrete for safety applications", PhD Dissertation, Delft University of Technology, Delft.
  35. Xiao, S.Y., Li, J.B. and Mo, Y.L. (2017), "Dynamic bending behaviours of RC beams under monotonic loading with variable rates", Comput. Concrete, 20(3), 349-360
  36. Yan, D. and Lin, G. (2006), "Dynamic properties of concrete in direct tension", Cement Concrete Res., 36(7), 1371-1378. https://doi.org/10.1016/j.cemconres.2006.03.003
  37. Zhang, Q.B. and Zhao, J. (2014), "A review of dynamic experimental techniques and mechanical behaviour of rock materials", Rock Mech. Rock Eng., 47(4), 1411-1478. https://doi.org/10.1007/s00603-013-0463-y
  38. Zhong, R. and Wille, K. (2016), "Linking pore system characteristics to the compressive behavior of pervious concrete", Cement Concrete Compos., 70, 130-138. https://doi.org/10.1016/j.cemconcomp.2016.03.016
  39. Zhou, Z.L., Li, X.B., Zuo, Y.J. and Hong, L. (2006), "Fractal characteristics of rock fragmentation at strain rate of 100-102 s-1", J. Central South Univ. Technol., 13(3), 290-294. https://doi.org/10.1007/s11771-006-0126-1
  40. Zhu, D., Peled, A. and Mobasher, B. (2011), "Dynamic tensile testing of fabric-cement composites", Constr. Build. Mater., 25(1), 385-395. https://doi.org/10.1016/j.conbuildmat.2010.06.014
  41. Zielinski, A.J., Reinhardt, H.W. and Kormeling, H.A. (1981), "Experiments on concrete under uniaxial impact loading", Mater. Struct., 14(2), 103-112.

피인용 문헌

  1. Fractal equations to represent optimized grain size distributions used for concrete mix design vol.26, pp.6, 2018, https://doi.org/10.12989/cac.2020.26.6.505