참고문헌
- Levy, G. N., "The Role and Future of the Laser Technology in the Additive Manufacturing Environment," Physics Procedia, Vol. 5, pp. 65-80, 2010. https://doi.org/10.1016/j.phpro.2010.08.123
- Gibson, I., Rosen, D. W., and Stucker, B., "Additive Manufacturing Technologies," Springer, 2014.
- Levy, G. N., Schindel, R., and Kruth, J.-P., "Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives," CIRP Annals-Manufacturing Technology, Vol. 52, No. 2, pp. 589-609, 2003. https://doi.org/10.1016/S0007-8506(07)60206-6
- Kruth, J.-P., Levy, G., Klocke, F., and Childs, T., "Consolidation Phenomena in Laser and Powder-Bed Based Layered Manufacturing," CIRP Annals, Vol. 56, No. 2, pp. 730-759, 2007. https://doi.org/10.1016/j.cirp.2007.10.004
- Ahn, D.-G., "Direct Metal Additive Manufacturing Processes and their Sustainable Applications for Green Technology: A Review," International Journal of Precision Engineering and Manufacturing- Green Technology, Vol. 3, No. 4, pp. 381-395, 2016. https://doi.org/10.1007/s40684-016-0048-9
- Simonelli, M., Tse, Y. Y., and Tuck, C., "Effect of the Build Orientation on the Mechanical Properties and Fracture Modes of SLM Ti-6Al-4V," Materials Science and Engineering: A, Vol. 616, pp. 1-11, 2014. https://doi.org/10.1016/j.msea.2014.07.086
- Vandenbroucke, B. and Kruth, J.-P., "Selective Laser Melting of Biocompatible Metals for Rapid Manufacturing of Medical Parts," Rapid Prototyping Journal, Vol. 13, No. 4, pp. 196-203, 2007. https://doi.org/10.1108/13552540710776142
- Qiu, C., Adkins, N. J., and Attallah, M. M., "Microstructure and Tensile Properties of Selectively Laser-Melted and of Hiped Laser- Melted Ti-6Al-4V," Materials Science and Engineering: A, Vol. 578, pp. 230-239, 2013. https://doi.org/10.1016/j.msea.2013.04.099
- Thijs, L., Verhaeghe, F., Craeghs, T., Van Humbeeck, J., and Kruth, J.-P., "A Study of the Microstructural Evolution during Selective Laser Melting of Ti-6Al-4V," Acta Materialia, Vol. 58, No. 9, pp. 3303-3312, 2010. https://doi.org/10.1016/j.actamat.2010.02.004
- Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., and Tuck, C., "Reducing Porosity in AlSi10Mg Parts Processed by Selective Laser Melting," Additive Manufacturing, Vol. 1, pp. 77-86, 2014.
- Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., et al., "On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance," International Journal of Fatigue, Vol. 48, pp. 300-307, 2013. https://doi.org/10.1016/j.ijfatigue.2012.11.011
- Vrancken, B., Thijs, L., Kruth, J.-P., and Van Humbeeck, J., "Heat Treatment of Ti-6Al-4V Produced by Selective Laser Melting: Microstructure and Mechanical Properties," Journal of Alloys and Compounds, Vol. 541, pp. 177-185, 2012. https://doi.org/10.1016/j.jallcom.2012.07.022
- Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., et al., "Effects of Build Orientation and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Lattice Structures," Additive Manufacturing, Vol. 5, pp. 77-84, 2015. https://doi.org/10.1016/j.addma.2014.12.008
- Donachie, M. J., "Titanium: A Technical Guide," ASM International, 2000.
- Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., et al., "Additive Manufacturing of Strong and Ductile Ti-6Al-4V by Selective Laser Melting via in Situ Martensite Decomposition," Acta Materialia, Vol. 85, pp. 74-84, 2015. https://doi.org/10.1016/j.actamat.2014.11.028
- Rafi, H., Karthik, N., Gong, H., Starr, T. L., and Stucker, B. E., "Microstructures and Mechanical Properties of Ti-6Al-4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting," Journal of Materials Engineering and Performance, Vol. 22, No. 12, pp. 3872-3883, 2013. https://doi.org/10.1007/s11665-013-0658-0
- Murr, L., Quinones, S., Gaytan, S., Lopez, M., Rodela, A., et al., "Microstructure and Mechanical Behavior of Ti-6Al-4V Produced by Rapid-Layer Manufacturing, for Biomedical Applications," Journal of the Mechanical Behavior of Biomedical Materials, Vol. 2, No. 1, pp. 20-32, 2009. https://doi.org/10.1016/j.jmbbm.2008.05.004
- Mertens, A., Reginster, S., Paydas, H., Contrepois, Q., Dormal, T., et al., "Mechanical Properties of Alloy Ti-6Al-4V and of Stainless Steel 316L Processed by Selective Laser Melting: Influence of Outof- Equilibrium Microstructures," Powder Metallurgy, Vol. 57, No. 3, pp. 184-189, 2014. https://doi.org/10.1179/1743290114Y.0000000092
- Koike, M., Greer, P., Owen, K., Lilly, G., Murr, L. E., et al., "Evaluation of Titanium Alloys Fabricated using Rapid Prototyping Technologies-Electron Beam Melting and Laser Beam Melting," Materials, Vol. 4, No. 10, pp. 1776-1792, 2011. https://doi.org/10.3390/ma4101776
- Vilaro, T., Colin, C., and Bartout, J. D., "As-Fabricated and Heat- Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting," Metallurgical and Materials Transactions, Vol. 42, No. 10, pp. 3190-3199, 2011. https://doi.org/10.1007/s11661-011-0731-y
- Tiley, J. S., "Modeling of Microstructure Property Relationships in Ti-6Al-4V," Ph.D. Thesis, Ohio State University, 2002.
- Kobryn, P. A. and Semiatin, S. L., "Mechanical Properties of Laser- Deposited Ti-6Al-4V," Proc. of the Solid Freeform Fabrication, 2001.
- AMS 2801B, "Heat Treatment of Titanium Alloy Parts," Aerospace Materials Specification, 2003.
- ASTM F2924, "Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion," ASTM International, 2014.
- Kruth, J. P., Badrossamay, M., Yasa, E., Deskers, J., Thijs, L., et al., "Part and Material Properties in Selective Laser Melting of Metals," Proc. of the International Symposium on Electromachining, 2010.
- David, S. A. and Vitek, J. M., "Correlation between Solidification Parameters and Weld Microstructure," International Materials Reviews, Vol. 34, No. 1, pp. 213-245, 1989. https://doi.org/10.1179/imr.1989.34.1.213
- Ducheyne, P., Kohn, D., and Smith, T. S., "Fatigue Properties of Cast and Heat Treated Ti-6Al-4V Alloy for Anatomic Hip Prostheses," Biomaterials, Vol. 8, No. 3, pp. 223-227, 1987. https://doi.org/10.1016/0142-9612(87)90068-8
- Vandenbroucke, B. and Kruth, J.-P., "Selective Laser Melting of Biocompatible Metals for Rapid Manufacturing of Medical Parts," Rapid Prototyping Journal, Vol. 13, No. 4, pp. 196-203, 2007. https://doi.org/10.1108/13552540710776142
- AMS 4911L, "Titanium Alloy, Sheet, Strip, and Plate Ti-6Al-4V Annealed," Aerospace Materials Specification, 2007.
피인용 문헌
- Effect of Laser Energy Density, Internal Porosity and Heat Treatment on Mechanical Behavior of Biomedical Ti6Al4V Alloy Obtained with DMLS Technology vol.12, pp.14, 2018, https://doi.org/10.3390/ma12142331
- Effects of Elemental Alloying on Surface Integrity in Joining of Composite Powders with Heterogeneous Titanium Substrates Using Selective Laser Melting vol.7, pp.4, 2018, https://doi.org/10.1007/s40684-019-00174-6
- Effect of post-treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures vol.26, pp.9, 2018, https://doi.org/10.1108/rpj-11-2019-0284
- Damage characterization of heat-treated titanium bio-alloy (Ti-6Al-4V) based on micromechanical modeling vol.8, pp.4, 2018, https://doi.org/10.1088/2051-672x/abc0f8
- Effects of Energy Parameters on Dimensional Accuracy When Joining Stainless-Steel Powders with Heterogeneous Metal Substrates vol.14, pp.2, 2018, https://doi.org/10.3390/ma14020320
- Electron Beam Surface Treatment of 316L Austenitic Stainless Steel: Improvements in Hardness, Wear, and Corrosion Resistance vol.27, pp.5, 2021, https://doi.org/10.1007/s12540-020-00773-y
- Effect of Laser Shock Peening on Properties of Heat-Treated Ti-6Al-4V Manufactured by Laser Powder Bed Fusion vol.8, pp.4, 2018, https://doi.org/10.1007/s40684-020-00234-2
- A Novel Time Step Fusion Method with Finite Volume Formulation for Accelerated Thermal Analysis of Laser Additive Manufacturing vol.8, pp.4, 2018, https://doi.org/10.1007/s40684-020-00237-z
- Targeted heat treatment of additively manufactured Ti-6Al-4V for controlled formation of Bi-lamellar microstructures vol.81, pp.None, 2018, https://doi.org/10.1016/j.jmst.2021.01.004
- The Effect of Building Direction on Microstructure and Microhardness during Selective Laser Melting of Ti6Al4V Titanium Alloy vol.30, pp.12, 2018, https://doi.org/10.1007/s11665-021-06039-x
- Indentation strain rate sensitivity of laser-powder bed fused and electron beam melted Ti–6Al–4V vol.195, pp.None, 2022, https://doi.org/10.1016/j.vacuum.2021.110690