Structural Monitoring and Maintenance

  • 제5권3호
  • /
  • Pages.325-343
  • /
  • 2018
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimal design of bio-inspired isolation systems using performance and fragility objectives

  • Hu, Fan (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Shi, Zhiguo (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Shan, Jiazeng (Research Institute of Structural Engineering and Disaster Reduction, Tongji University)
  • 투고 : 2018.02.28
  • 심사 : 2018.07.19
  • 발행 : 2018.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study aims to propose a performance-based design method of a novel passive base isolation system, BIO isolation system, which is inspired by an energy dissipation mechanism called 'sacrificial bonds and hidden length'. Fragility functions utilized in this study are derived, indicating the probability that a component, element, or system will be damaged as a function of a single predictive demand parameter. Based on PEER framework methodology for Performance-Based Earthquake Engineering (PBEE), a systematic design procedure using performance and fragility objectives is presented. Base displacement, superstructure absolute acceleration and story drift ratio are selected as engineering demand parameters. The new design method is then performed on a general two degree-of-freedom (2DOF) structure model and the optimal design under different seismic intensities is obtained through numerical analysis. Seismic performances of the biologically inspired (BIO) isolation system are compared with that of the linear isolation system. To further demonstrate the feasibility and effectiveness of this method, the BIO isolation system of a 4-storey reinforced concrete building is designed and investigated. The newly designed BIO isolators effectively decrease the superstructure responses and base displacement under selected earthquake excitations, showing good seismic performance.

키워드

참고문헌

  1. Chen, X., Yang, H.T.Y., Shan, J. et al. (2016), "Bio-inspired passive optimized base-isolation system for seismic mitigation of building structures", J. Eng. Mech., 142(1), 04015061. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000971
  2. FEMA, P. (2012), "58-1 seismic performance assessment of buildings (volume 1-methodology)", Federal Emergency Management Agency, Washington.
  3. Hansma, P.K., Fantner, G.E., Kindt, J.H. et al. (2005), "Sacrificial bonds in the interfibrillar matrix of bone", J. Musculoskelet Neuronal Interact, 5(4), 313-315.
  4. Jangid, R. and Kelly, J. (2001), "Base isolation for near-fault motions", Earthq. Eng. Struct. D., 30(5), 691-707. https://doi.org/10.1002/eqe.31
  5. Kaynia, A.M., Taucer, F. and Hancilar, U. (2013), Guidelines for deriving seismic fragility functions of elements at risk: Buildings, lifelines, transportation networks and critical facilities, Publications Office.
  6. Kelly, J.M. (1997), Earthquake-resistant design with rubber, Springer London.
  7. Kim, H.S. and Roschke, P.N. (2006), "Fuzzy control of base-isolation system using multi-objective genetic algorithm", Comput.-Aided Civil Infrastruct. Eng., 21(6), 436-449. https://doi.org/10.1111/j.1467-8667.2006.00448.x
  8. Kulkarni, J.A. and Jangid, R.S. (2002), "Rigid body response of base-isolated structures", Struct. Control Health Monit., 9(3), 171-188.
  9. Mackie, K.R. (2005), Fragility-based seismic decision making for highway overpass bridges.
  10. May, P.J. (2003), "Performance-based regulation and regulatory regimes: The saga of leaky buildings", Law & Policy, 25(4), 381-401. https://doi.org/10.1111/j.0265-8240.2003.00155.x
  11. Moeindarbari, H. and Taghikhany, T. (2014), "Seismic optimum design of triple friction pendulum bearing subjected to near-fault pulse-like ground motions", Struct. Multidiscip. O., 50(4), 701-716. https://doi.org/10.1007/s00158-014-1079-x
  12. Nagarajaiah, S., Narasimhan, S. and Johnson, E. (2008), "Structural control benchmark problem: Phase ii-nonlinear smart base‐isolated building subjected to near-fault earthquakes", Struct. Control Health Monit., 15(5), 653-656. https://doi.org/10.1002/stc.280
  13. Ramallo, J.C., Johnson, E.A. and Spencer Jr., B.F. (2002), " 'Smart' base isolation systems", J. Eng. Mech., 128(10), 1088-1099. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1088)
  14. Scruggs, J.T., Taflanidis, A.A. and Beck, J.L. (2006), "Reliability-based control optimization for active base isolation systems", Struct. Control Health Monit., 13(2‐3), 705-723. https://doi.org/10.1002/stc.107
  15. Shan, J., Shi, Z., Hu, F., Yu, J. and Shi, W. (2018), "Stochastic optimal design of novel nonlinear base isolation system for seismic-excited building structures", Struct. Control Health Monit., e2168. https://doi.org/10.1002/stc.2168
  16. Skinner, R.I., Robinson, W.H. and McVerry, G.H. (1993), An introduction to seismic isolation, John Wiley & Sons.
  17. Taghavi, S. and Miranda, E. (2003), Response assessment of nonstructural building elements, Pacific Earthquake Engineering Research Center.
  18. Yang, H.T.Y., Lin, C.H., Bridges, D. et al. (2010), "Bio-inspired passive actuator simulating an abalone shell mechanism for structural control", Smart Mater. Struct., 19(10), 105011. https://doi.org/10.1088/0964-1726/19/10/105011

피인용 문헌

  1. Effect of external force on buckling of cytoskeleton intermediate filaments within viscoelastic media vol.25, pp.3, 2020, https://doi.org/10.12989/cac.2020.25.3.205