Abstract
The importance of reliability in the development of weapons systems and reliability tests has been emphasized recently. Therefore, this study evaluated a reliability test design method of a bladder type accumulator and proposed a process for reliability test design. To design the reliability test of the accumulator, the main failure modes and failure mechanisms were investigated, and the main stress factors were analyzed to select the appropriate acceleration model. A steady - state reliability test was designed according to the number of samples, and the reliability level and accelerated life test time were calculated according to the acceleration factor computed using the selected acceleration model.
최근 무기체계의 개발에서 핵심부품 구성품의 신뢰성 시험이 국방전력발전 업무훈령 규정에 반영되고 각 종 부품의 복잡도의 증가로 인하여서 신뢰성의 중요도가 강조되고 있고 그에 따라서 신뢰성 시험의 중요성 또한 강조되고 있다. 또한 핵심 구성품의 수명시험 비용과 기간을 단축하기 위해서는 가속수명시험 기법의 적절한 적용이 요구되어 있다. 그러므로 본 논문에서는 헬기에 장착되는 블래더형 축압기를 대상으로 한 신뢰성시험 설계 방법을 연구하고 신뢰성 시험 설계에 필요한 프로세스를 제시 하였다. 축압기의 신뢰성 시험을 설계하기 위해 고장률예측, 고장모드 영향 분석, 고장나무분석 등의 기법을 이용하여 주요 고장모드와 고장 메커니즘을 조사하고 2-Stage QFD를 통하여서 각 고장모드의 우선순위 및 중요도를 체크함과 동시에 주요 스트레스 인자를 분석하여 적절한 가속 모델을 선택했다. 그리고 필요 시료 수와 신뢰도 수준 및 각각의 스트레스 조건에 따라서 무고장 시험 설계법을 참고하여 정상상태의 신뢰성시험을 설계하였고 또한 선택한 가속 모델을 사용하여 계산한 가속계수에 따라 가속 수명시험시간을 계산하였다.