DOI QR코드

DOI QR Code

Research for Detailed Technical Standards of Exposure Pipe

노출배관의 세부 기술기준 연구

  • Kang, Byung-IK (Korea Gas Safety Corporation Institute of Gas Safety R&D) ;
  • Park, Woo-Il (Korea Gas Safety Corporation Institute of Gas Safety R&D) ;
  • Yim, Sang-Sik (Korea Gas Safety Corporation Institute of Gas Safety R&D) ;
  • Jo, Young-Do (Korea Gas Safety Corporation Institute of Gas Safety R&D)
  • 강병익 (한국가스안전공사 안전연구실) ;
  • 박우일 (한국가스안전공사 안전연구실) ;
  • 임상식 (한국가스안전공사 안전연구실) ;
  • 조영도 (한국가스안전공사 안전연구실)
  • Received : 2018.02.09
  • Accepted : 2018.06.09
  • Published : 2018.06.30

Abstract

The exposed pipe requires higher durability because is directly contacted with the outside air unlike the buried pipe. For this purpose, clear detailed technical standards are essential in the design and construction of piping systems. However, the existing technical standards were not able to evaluate the durability considering the characteristics of piping, so many questions were raised in the field. Therefore, through the present study, the existing detailed technical standards are revised to propose measures to secure the durability of exposed piping.

노출배관은 매설배관과 달리 바로 외기에 닿아있음으로 이에 대한 더욱 높은 내구 신뢰성이 요구 된다. 이를 위해 배관 시스템의 설계와 시공 시 명확한 세부 기술기준은 필수적이다. 하지만, 기존의 기술기준은 배관 특성을 고려한 내구성 평가가 되지 않아, 현장에서 많은 의문점을 제기했었다. 따라서, 본 연구를 통해서 기존 세부 기술기준을 개정하여 노출배관의 명확한 내구 안전성 확보방안을 제시하고자 한다.

Keywords

References

  1. ABAQUS MANUAL.
  2. CEASAR II MANUAL.
  3. Lee, U. S., Kim, J. K., 2000, Fracture Mechanics, Korea Economic Daily, Seoul, pp. 42-50.
  4. Kang, B. I., YOO, J. H. and Lee, J. O., 2015, "Accelerated durability test design for excavator swing device based on field measurement", The Korean Society of Mechanical Engineers, pp. 1109-1113.
  5. ASME B31.3-2002, PROCESS PIPING.
  6. ASME B31.8-2016, Gas Transmission and Distribution Piping Systems.
  7. C. S. Desai and H. J. Siriwardane, 1987, Constitutive laws for engineering materials, Prentice-Hall, pp36-38.
  8. Lee, H. J., Song, J. H., Park, J. M. and Kang, J. Y., 2005, "Finte Element Analysis of Fatigue Crack Closure Behavior Under Plane Stress and Plate Strain State", The Korean Society of Mechanical Engineers, pp. 179-184.
  9. The Korean Welding and Joining Society, 2008, Handbook of Welding and Joining, pp.169-266.
  10. Liang-Chuan Peng, Tsen-Loong Peng, 2003, PIPE STRESS ENGINEERING, ASME PRESS, pp. 151-205.
  11. Bendat JS., 1964, Probability function for random responses, NASA report on contract NAS-5-4590.
  12. T. Dirlik, 1985, Application of computers in fatigue analysis, University of Warwick thesis.
  13. C. Lalanne, 2002, Mechanical vibration and shock, Hermes Penton Science.
  14. Jung, S. W., Chu, Y. J. and Kim, H. S., 2016, "Vibration durability and reliability assessment utilizing the relative vibration date", The Korean Society of Automotive Engineers, pp. 482-483.
  15. Kang, B. I., YOO, J. H. and Choi, B. K., 2016, "Bolted Joint Design for Wheeled Excavator's Rear Axle Considering Pre-tension", The Korean Society of Mechanical Engineers, pp. 453-454.