참고문헌
- Y. Zhang, Y. Zhang, R. B. Marcus, 1999, Thermally actuated microprobes for a new wafer probe card, J. Microelectromech. Syst., Vol. 8, No. 1, pp. 43-49. https://doi.org/10.1109/84.749401
- S. K. Lee, S. B. Lee, B. M. Kim, 2010, Process design of multi-stage wet wire drawing for improving the drawing speed for 0.72wt%C steel wire, J. Mater. Process. Technol., Vol. 210, pp. 776-783. https://doi.org/10.1016/j.jmatprotec.2010.01.007
- S. B. Son, Y. K Lee, S. H. Kang, H. S. Chung, J. S. Cho, J. T. Moon, K. H. Oh, 2011, A numerical approach on the inclusion effects in ultrafine gold wire drawing process, Eng. Fail. Anal., Vol. 18, pp. 1271-1278.
- A. Haddi, A. Imad, G. Vega, 2011, Analysis of temperature and speed effects on the drawing stress for improving the wire drawing process, Mater. Des., Vol. 32, pp. 4310-4315. https://doi.org/10.1016/j.matdes.2011.04.010
- A Skolyszewski, M. Packo, 1998, Back tension value in the fine wire drawing process, J. Mater. Process. Technol., Vol. 80-81, pp. 380-387. https://doi.org/10.1016/S0924-0136(98)00116-2
- O. M. Ogorodmikova, E. M. Borodin, 2016, Computer analysis of the deformation mode of the drawing tool for platinum alloys, Russian J. Nonferrous Met., Vol. 57, No. 2, pp. 92-94. https://doi.org/10.3103/S1067821216020085
- T. Masse, L. Fourment, P. Montmitonnet, C. Bobadilla, S. Foissey, 2013, The optimal die semi-angle concept in wire drawing, examined using automatic optimization techques, Int. J. Mater. Forum, Vol. 6, pp. 377-389. https://doi.org/10.1007/s12289-012-1092-9
- S. K. Lee, D. C. Ko, B. M. Kim, 2008, Effect of abrasive particle size on wear and fracture of WC drawing die for brass coated high carbon steel cord wire, Steel Research Int., Vol. 79, pp. 20-27.
- L. Filice, G. Ambrogio, F. Guerriero, 2013, A multiobjective approach for wire-drawing process, Procedia CIRP, Vol. 12, pp. 294-299. https://doi.org/10.1016/j.procir.2013.09.051
- Y. N. Loginov, A. E. Pervukhin, N. A. Babailov, 2017, Evolution of surface defects in platinum alloy wire under drawing, Proc. the 11th Int. Conf. Mech. Resour. Diagn. Mater. Struct., E. S. Gorkunov et al. (Ed.), Russia, Dec. 11-15, pp. 040032.
- Jpn. Soc. Technol. Plast., 1990, Drawing process, Corona. p. 44.
- S. K. Lee, S. Y. Lee, I. K. Lee, D. H. Kim, M. S. Jeong, J. W. Lee, S. K. Hwang, K. J. Cha, 2017, Wire drawing process design for ultra fine rhodium wire, Autumn Conf. of KSPE, C. H. Park et al. (Ed.), GyeongGi, Dec. 13-15, p. 101.
- US Synthetic Wire Die, http://www.usswiredie.com