Journal of the Korea Society of Computer and Information (한국컴퓨터정보학회논문지)

Korean Society of Computer Information (한국컴퓨터정보학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Implementation of the Automatic cable assembly test system that can test cable assembly effectively

  • Received : 2018.04.18
  • Accepted : 2018.07.13
  • Published : 2018.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we propose the principles and design details of Automatic cable assembly test system and show its utility. Testing the cable assembly is required periodically or non-periodically in the system that the cable assembly performance is quite important like military equipment. There are several weaknesses when humans test the cable assembly manually. It not only takes much time but also could happen human error. To improve these disadvantages, I developed Automatic cable assembly test system. The system can be implemented by building switching control system that connect and disconnect the cable assembly and measuring devices. Through the result of the cable assembly test with this test system, we show this system makes test time short and improves of test reliability as compared with manual test.

Keywords

References

  1. Yang, Jong Won, Design and Implementation of Large Capacity Cable Checking System using an I/O Buffer Method, Journal of the KIMST, 5th Volume2, Jun. 2002
  2. Seoung-Hwa Yang, "Study on Productivity Based maintenance Development Process Model considering the Development Security and Quality", Kon-kuk University, 2012
  3. IPC, IPC-WHMA-A-620B-S, datasheet, http://www.ipc.org/4.0_Knowledge/4.1_Standards/IPC-WHMA-A-620B-S.pdf
  4. Yong-Kyu Park1, Young-Seek Cho1, Kwan-Woo Lee2, Kee-Hong Um3, and Dae-Hee Park1,a, Load Current and Temperature Measurement for Measuring the Insulation Resistance of the 6.6 kV Cable, Journal of the Korean institute of electronic material engineers, Vol. 28, No 1, pp. 46-50 Dec. 2014
  5. Yoon Deok-Ran, "A Study on the Field Application of Live-Line Diagnostic Technique for High Voltage Cable", Korea Electrical Safety Corporation
  6. W. K. Kim, Design and Implementation of the multi-function switching system for Automatic Test Equipment(ATE), Journal of the Graduate School of Industry Kumoh National Institute of Technology, Dec. 2012.
  7. Seok Min Lee, Journal of The Korea Society of Computer and Information, Vol. 23 No. 3, pp. 9-16, March 2018 https://doi.org/10.9708/JKSCI.2018.23.03.009
  8. Kim, Dong-Jun, Real-Time System Parallel Testing Techniques for Weapon System Error Verification, Journal of the Institute of Electronics and Information Engineers, Vol. 53, No. 11, pp. 130-138, Nov. 2016. https://doi.org/10.5573/ieie.2016.53.11.130
  9. FTDI, D2XX_Programmer's_Guide(FT_000071), User guide, http://www.ftdichip.com/Support/Documents/ProgramGuides/D2XX_Programmer's_Guide(FT_000071).pdf
  10. Ju-Wan Ryu, "Design Of Ethernet Protocol Gateway for Parallel Interface," The Graduate School of Kyungpook National University degree of Master of Science, December 2007.
  11. Panasonic, PA1a-12v, datasheet, https://www.panasonic-electric-orks.com/cps/rde/xbcr/pew_eu_en/ds_61C10_en_pa.pdf
  12. Sung-Yeol Yu & Kang-Bae Lee, "A Study on Job Sequence and Feeder Allocation Problecm in PCB Assembly Line", Journal of The Korea Society of Industrial and Systems Engineering, March 2006
  13. AN_124_User_Guide_For_FT_PROG_datasheet.pdf
  14. Hyeok Jin Gwon, Journal of The Korea Society of Computer and Information, Vol. 22 No. 7, pp. 9-16, July 2017 https://doi.org/10.9708/jksci.2017.22.01.009
  15. Kyungjin Choi, The Study on The Production Testing Equipment for the Improvement of System Test Reliability in FCS, Journal of The Institute of Electronics and Information Engineers Vol.53, NO.11, November 2016
  16. Yoon, Young-Ho; Ku, Ki-Young; Keum, Jong-Joo; Hwang, Un-Hee; Woo, Soon, "The Study on Improvement of ATE Reliability in Production Phase," The Institute of Electronics Engineers of Korea - System and Control, Vol. 47, No. 6, pp. 19-26, Nov. 2010.
  17. Youn-Ho Lee and Kwang-Kyun Jung and Tae-Dong Yoon and Ki-Sang Kwon, "Optimal Reliability Strategy for k-out-of-n System Considering Redundancy and Maintenance, " Journal of the Korean Institute of Industrial Engineers, Vol. 40, no. 1, pp. 118-127, February 2014. https://doi.org/10.7232/JKIIE.2014.40.1.118