DOI QR코드

DOI QR Code

Seismic performance of RC frames retrofitted with haunch technique

  • Akbar, Junaid (Department of Civil Engineering, Earthquake Engineering Center) ;
  • Ahmad, Naveed (Department of Civil Engineering, Earthquake Engineering Center) ;
  • Alam, Bashir (Department of Civil Engineering, Earthquake Engineering Center) ;
  • Ashraf, Muhammad (Department of Civil Engineering, Earthquake Engineering Center)
  • 투고 : 2017.11.14
  • 심사 : 2018.04.10
  • 발행 : 2018.07.10

초록

Shake table tests performed on five 1:3 reduced scale two story RC moment resisting frames having construction defects, have shown severe joint damageability in deficient RC frames, resulting in joint panels' cover spalling and core concrete crushing. Haunch retrofitting technique was adopted herein to upgrade the seismic resistance of the deficient RC frames. Additional four deficient RC frames were built and retrofitted with steel haunch; both axially stiffer and deformable with energy dissipation, fixed to the beam-column connections to reduce shear demand on joint panels. The as-built and retrofitted frames' seismic response parameters are calculated and compared to evaluate the viability of haunch retrofitting technique. The haunch retrofitting technique increased the lateral stiffness and strength of the structure, resulting in the increase of structure's overstrength. The retrofitting increased response modification factor R by 60% to 100%. Further, the input excitation PGA was correlated with the lateral roof displacement to derive structure response curve that have shown significant resistance of retrofitted models against input excitations. The technique can significantly enhance the seismic performance of deficient RC frames, particularly against the frequent and rare earthquake events, hence, promising for seismic risk mitigation.

키워드

참고문헌

  1. ACI 318 (2005), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  2. Ahmad, N., Shahzad, A., Rizwan, M., Khan, A.N., Ali, S.M., Ashraf, M., Naseer, A., Ali, Q. and Alam, B. (2017), "Seismic performance assessment of non-compliant SMRF reinforced concrete frame: Shake table test study", J. Earthq. Eng., 1-19.
  3. Appa-Rao, G., Navya, V. and Eligehausan, R. (2013) "Strengthening of shear deficient rc beam-column joints in mrfs under seismic loading", Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Spain.
  4. Badrashi, Y.I., Ali, Q. and Ashraf, M. (2010), Reinforced Concrete Buildings in Pakistan-Housing Report, Housing Report No. 159, Earthquake Engineering Research Institute, California, U.S.A.
  5. BCP-SP (2007), Building Code of Pakistan: Seismic Provision, Ministry of Housing and Works, Islamabad, Pakistan. https://doi.org/10.12989/sem.2015.53.4.791
  6. Chaulagain, H., Rodrigues, H., Spacone, E. and Varum, H. (2015), "Seismic response of current RC buildings in Kathmandu valley", Struct. Eng. Mech., 53(4), 791-818. https://doi.org/10.12989/sem.2015.53.4.791
  7. Danciu, L., Sesetyan, K., Demircioglu, M., Gulen, L., Zare, M., Basili, R., Elias A., Adamia, S., Tsereteli, N., Yalcin, H., Utkucu, M., Khan, M.A., Sayab, M., Hessami, K., Rovida, A.N., Stucchi, M., Burg, J.P., Karakhanian, A., Babayan, H., Avanesyan, M., Mammadli, T., Al-Qaryouti, M., Kalafat, D., Varazanashvili, O., Erdik, M. and Giardini, D. (2017), "The 2014 earthquake model of the middle east: Seismogeneic source", Bullet. Earthq. Eng., 1-32.
  8. EERI (2005), Learning from Earthquakes: First Report on the Kashmir Earthquake of October 8, 2005, Technical Report, Earthquake Engineering Research Institute (EERI), Oakland, California, U.S.A.
  9. Engindeniz, M., Kahn, L.F. and Zureick, A.H. (2005), "Repair and strengthening of reinforced concrete beam-column joints: State of the art", ACI Struct. J., 102(2), 1.
  10. Genesio, G. (2012), "Seismic assessment of rc exterior beamcolumn joints and retrofit with haunches using post-installed anchors", Ph.D. Dissertation, Stuttgart University, Germany.
  11. Naseer, A., Naeem, A., Hussain, Z. and Ali, Q. (2010), "Observed seismic behavior of buildings in northern Pakistan during the 2005 Kashmir earthquake", Earthq. Spectr., 26(2), 425-449. https://doi.org/10.1193/1.3383119
  12. Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, Oakland, California, U.S.A. https://doi.org/10.1002/eqe.600
  13. Pampanin, S., Christopoulos, C. and Chen, T.H. (2006), "Development and validation of a metallic haunch seismic retrofit solution for existing under-designed RC frame buildings", Earthq. Eng. Struct. Dyn., 35(14), 1739-1766. https://doi.org/10.1002/eqe.600
  14. Pampanin, S., Calvi, G.M. and Moratti, M. (2002), "Seismic behavior of R.C. beam-column joints designed for gravity only", Proceedings of the 12th European Conference on Earthquake Engineering.
  15. Priestley, M.J.N. (1997), "Displacement-based seismic assessment of reinforced concrete buildings", J. Earthq. Eng., 1(1), 157-192. https://doi.org/10.1080/13632469708962365
  16. Quintana-Gallo, P., Pampanin, S., Carr, A.J. and Bonelli, P. (2010), "Shake table tests of under designed RC frames for the seismic retrofit of buildings-design and similitude requirements of the benchmark specimen", Proceedings of the New Zealand Society of Earthquake Engineering.
  17. Rizwan, M., Ahmad, N. and Khan, A.N. (2017), "Seismic performance of smrf compliant and non-compliant rc frames", ACI Struct. J., Accepted. https://doi.org/10.1007/s10518-009-9118-5
  18. Rossetto, T. and Peiris, N. (2009), "Observations of damage due to the Kashmir earthquake of October 8, 2005 and study of current seismic provisions for buildings in Pakistan", Bullet. Earthq. Eng., 7(3), 681-699. https://doi.org/10.1007/s10518-009-9118-5
  19. Sharma, A., Reddy, G.R., Eligehausen, R., Genesio, G. and Pampanin, S. (2014), "Seismic response of reinforced concrete frames with haunch retrofit solution", ACI Struct. J., 111(3), 673-684.
  20. Sharma, A. (2013), "Seismic behavior and retrofitting of rc frame structures with emphasis on beam-column joints-experiments and numerical modeling", Ph.D. Dissertation, Stuttgart University, Germany.
  21. Sharma, A., Reddy, G.R. and Vaze, K.K. (2011), "Shake table tests on a non-seismically detailed RC frame structure", Struct. Eng. Mech., 41(1), 1-24. https://doi.org/10.12989/sem.2012.41.1.001
  22. Shiravand, M.R., Nejad, A.K. and Bayanifar, M.H. (2017), "Seismic response of RC structures rehabilitated with SMA under near-field earthquakes", Struct. Eng. Mech., 63(4), 497-507. https://doi.org/10.12989/SEM.2017.63.4.497
  23. Wang, B., Zhu, S., Xu, Y.L. and Jiang, H. (2017), "Seismic retrofitting of non-seismically designed rc beam-column joints using buckling-restrained haunches: Design and analysis", J. Earthq. Eng., 1-21.
  24. Waseem, M. and Spacone, E. (2017), "Fragility curves for the typical multi-span simply supported bridges in northern Pakistan", Struct. Eng. Mech., 64(2), 214-223. https://doi.org/10.1007/s11069-017-3058-1
  25. Waseem, M., Lai, C.G. and Spacone, E. (2018), "Seismic hazard assessment of northern Pakistan", Nat. Haz., 90(2), 563-600. https://doi.org/10.1007/s11069-017-3058-1
  26. Zare, M., Amini, H., Yazdi, P., Sesetyan, K., Demircioglu, M.B., Kalafat, D., Erdik, M., Giardini, D., Khan, A. and Tsereteli, N. (2014), "Recent developments of the Middle East catalog", J. Seismol., 18(4), 749-772. https://doi.org/10.1007/s10950-014-9444-1

피인용 문헌

  1. Response Modification Factor of RC Frames Strengthened with RC Haunches vol.2020, pp.None, 2018, https://doi.org/10.1155/2020/3835015
  2. Damage effect on experimental modal parameters of haunch strengthened concrete-encased composite column-beam connections vol.29, pp.2, 2018, https://doi.org/10.1177/1056789519843330
  3. Experimental and numerical study performed on seismic behavior of irregular external SRC joints in the main plant of CAP1400 NPP vol.217, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2020.110821
  4. Experimental and analytical investigations of reinforced concrete beam-column joints retrofitted by single haunch vol.23, pp.15, 2020, https://doi.org/10.1177/1369433220922493
  5. Force-based seismic design of steel haunch retrofit for RC frames vol.20, pp.2, 2018, https://doi.org/10.12989/eas.2021.20.2.133
  6. Shake table testing of confined adobe masonry structures vol.20, pp.2, 2021, https://doi.org/10.12989/eas.2021.20.2.149
  7. Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan vol.11, pp.7, 2018, https://doi.org/10.3390/buildings11070276
  8. Shake-table testing of a 1:5 reduced-scale five-story masonry-infilled reinforced concrete frame structure vol.79, pp.3, 2018, https://doi.org/10.12989/sem.2021.79.3.373