Fig. 1. Main components of experimental heat pump system with hybrid ground heat exchanger.
Fig. 2. Schematic diagram of experimental heat pump system with hybrid ground heat exchanger.
Fig. 3. Hourly average temperature variations on source and load sides.
Fig. 4. Water temperature variation on source and load sides for a typical cooling week.
Fig. 5. Cooling capacity, heat release of HGHE, and power consumption: August 5, 2017.
Fig. 6. Patterns on water temperature variations for source and load sides.
Fig. 7. Patterns on heat release of HGHE and power consumption of system.
Fig. 8. Cooling COP of heat pump and system: August 5, 2017.
Fig. 9. Patterns on cooling COP of heat pump and system.
Fig. 10. Capacity, power consumption, and COP of system with EST: Jul. 31∼Aug. 6, 2017.
Fig. 11. COP with outdoor air temperature: Jul. 31~Aug. 6, 2017.
Table 1. Parameters and uncertainties
Table 2. Capacity ratios of SWHE and VGHE in hybrid ground heat exchanger
References
- Kavanaugh, S. and Rafferty, K., 2014, Geothermal Heating and Cooling: Design of Ground-Source Heat Pump Systems, ASHRAE, Atlanta.
- Lund, J. W. and Boyd, T. L., 2016, Direct utilization of geothermal energy 2015 worldwide review, Geothermics, Vol. 60, pp. 66-93. https://doi.org/10.1016/j.geothermics.2015.11.004
- Korea Energy Agency, 2016, New & Renewable Energy Statistics 2015 (2016 Edition).
- Mitchell, M. and Spitler, J., 2014, Open-loop direct surface water cooling and surface water heat pump systems-A review, HVAC&R Research, Vol. 19, pp. 125-140.
- Hattemer, B. and Kavanaugh, S., 2005, Design temperature data for surface water heating and cooling systems, ASHRAE Transactions, Vol. 111, pp. 695-701.
- Chiasson, A., Spitler, J., Rees, S., and Smith, M., 2000, A model for simulating the performance of shallow pond as a supplemental heat rejecter with closed-loop ground-source heat pump systems, ASHRAE Transactions, Vol. 106, pp. 107-121.
- Zou, S. and Xie, X., 2017, Simplified model for coefficient of performance calculation of surface water source heat pump, Applied Thermal Engineering, Vol. 112, pp. 201-207. https://doi.org/10.1016/j.applthermaleng.2016.10.081
- Lv, N., Zhang, Q., Chen, Z., and Wu, D., 2017, Simulation and analysis on the thermodynamic performance of surface water source heat pump system, Building Simulation, Vol. 10, pp. 65-73. https://doi.org/10.1007/s12273-016-0308-1
- Chen, X., Zhang, G., Peng, J., Lin, X., and Liu, T., 2006, The performance of an open-loop lake water heat pump system in south China, Applied Thermal Engineering, Vol. 26, pp. 2255-2261. https://doi.org/10.1016/j.applthermaleng.2006.03.009
- Schibuola, H. and Scarpa, M., 2016, Experimental analysis of the performances of a surface water source heat pump, Energy and Buildings, Vol. 113, pp. 182-188. https://doi.org/10.1016/j.enbuild.2015.12.048
- Do, S. L. and Haberl, J., 2016, Development and verification of a custom-built ground heat exchanger model for a case study building, Energy and Buildings, Vol. 119, pp. 242-255. https://doi.org/10.1016/j.enbuild.2016.03.049
- Sohn, B., 2016, Preliminary analysis on design parameters and application effects of surface water heat exchanger (SWHE), Transactions of the Korea Society of Geothermal Energy Engineers, Vol. 12, No. 3, pp. 24-32. https://doi.org/10.17664/ksgee.2016.12.3.024
- Sohn, B., Lim, H. J., and Kong, H. J., 2017, Cooling performance analysis of ground-source heat pump system using borehole and shallow pond as heat sinks, SAREK 2017 Summer Annual Conference, pp. 706-709.
- Sohn, B., 2017, Cooling performance of heat pump system using artificial pond and borehole as heat sink, SAREK 2017 Winter Annual Conference, pp. 439-442.
- Kline, S. J., 1985, The purpose of uncertainty analysis, J. Fluids Engineering, Vol. 107, pp. 153-160. https://doi.org/10.1115/1.3242449