DOI QR코드

DOI QR Code

Ion Exchange of Gold(III) from Ammonium Chloride Solution by Anionic Resins

염화암모늄용액에서 음이온 교환수지에 의한 금(III)의 이온교환

  • Ahn, Hyeong Hun (Department of Advanced Material Science & Engineering, Institute of Rare Metal, Mokpo National University) ;
  • Lee, Man Seung (Department of Advanced Material Science & Engineering, Institute of Rare Metal, Mokpo National University)
  • 안형훈 (목포대학교 공과대학 신소재공학과) ;
  • 이만승 (목포대학교 공과대학 신소재공학과)
  • Received : 2018.02.06
  • Accepted : 2018.03.13
  • Published : 2018.04.30

Abstract

Batch ion exchange experiments of Au(III) were performed from ammonium chloride solution by employing strong anionic exchange resins (Amberlite IRA 402 and AG 1-X8). Au(III) was well loaded into the two resins and the loading behavior of Au(III) into AG 1-X8 was superior to that into Amberlite IRA 402. The loading of Au(III) into AG 1-X8 followed Langmuir adsorption isotherm and the experimentally determined loading capacity was 355 mg/g. Au(III) was successfully eluted by $HClO_4$ from the loaded AG 1-X8 and the elution percentage of Au(III) increased with the concentration of $HClO_4$.

강염기성 음이온 교환 수지인 Amberlite IRA 402와 AG 1-X8로 염화암모늄용액에 함유된 금(III)의 이온교환을 회분식 실험으로 조사했다. 두 수지 모두 염화암모늄용액에서 금(III)을 잘 흡착했으며, AG 1X-8이 Amberlite IRA 402보다 우수한 금(III) 흡착거동을 보였다. AG 1-X8 수지의 금(III)의 흡착은 Langmuir 등온흡착과 잘 일치했고 흡착용량은 355 mg/g이었다. AG 1X-8에 흡착된 금(III)은 과염소산으로 세출할 수 있으며, 과염소산의 농도 증가에 따라 세출률이 증가하였다.

Keywords

References

  1. W. D. Xing, K. W. Lee, and M. S. Lee, 2017 : Leaching of Gold and Silver from Anode slime with Inorganic Reagents, KIRR, No. 1, pp.30-36.
  2. W. D. Xing, M. S. Lee, and G. Senanayake, 2018 : Separation of Noble and base Metals from a Chloride Leach Solution of Anode Slime by Solvent Extraction: Par I. Recovery of Gold using Cyanex 827, Hydrometallurgy, Submitted.
  3. L. F. Michichael, 2013 : Hydrometallurgy Fundamentals and Application, WILEY, TMS, USA.
  4. F. C. Nachhod, 1949 : Ion Exchange Theory and Applicatoin, Academic Press Inc, New York.
  5. Wronski, S. Pasieczna-Patkowska, and Z. Hubicki, 2008 : Mechanism of Sorption Sulpho-derivative Organic Chelating Agents on Strong Base Anion Exchanger Amberlite IRA-402 by FT-IR/PAS and DRS Methods, Eur. Phy. J, Special Topics 154, pp.377-380. https://doi.org/10.1140/epjst/e2008-00579-0
  6. J. C. Crittenden et al., 2012 : MWH's Water treatment Principles and Design, Third edition, John Wiley & Sons, Inc, Canada.
  7. E. Hogfeldt, 1971 : Stability Constants of Metal-Ion Complexes Part A: Inorganic Ligands, Chemical Society.
  8. E. A. Moawed and M. F. El-Shahat 2013 : Synthesis, Characterization of Low Density Polyhydroxy Polyurethane foam and its Application for Separation and Determination of Gold in Water and Ores Samples, Anal. Chim. Acta, 788, pp.200-207. https://doi.org/10.1016/j.aca.2013.05.064
  9. S. S. Zumdahl and S. A. Zumdahl, 2010 : Chemistry, Eighth edition, Cengage Learning, USA.
  10. T. H. Nguyen and M. S. Lee, 2015 : Separation of Molybdenum(VI) and Tungsten(VI) from Sulfuric Acid Solution by Ion Exchange with TEVA Resin, Sep. Sci. Technol, 50, pp.2060-2065.
  11. N. V. Nguyen et al., 2010 : Comparative studies on the Adsorption of Au(III) from Waste Rinse Water of Semi-conductor Industry Using Various Resins, Hydrometallurgy, 105, pp.161-167. https://doi.org/10.1016/j.hydromet.2010.09.003
  12. P. J. Conradie, M. W. Johns, and R. J. Fowles, 1995 : Elution and Electrowinning of Gold from Gold-selective Strong-base Resins, Hydrometallurgy, 37, pp.349-366. https://doi.org/10.1016/0304-386X(94)00032-X
  13. J. O. Marsden and C. L. House, 2006 : The Chemistry of Gold Extraction, 2nd Edition, SME, Colorade, USA.
  14. L. Peng et al., 2009 : Adsorption Properties of Ag(I), Au(III), Pd(II), and Pt(IV) Ions on Commercial 717 Anion-exchange Resin, Trans. Nonfeerous Met. Soc. China, 19, pp.1509-1513. https://doi.org/10.1016/S1003-6326(09)60061-3
  15. F. J. Alguacil, P. Adeva, and M. Alonso, 2005 : Processing of Resiual Gold(III) Solution via Ion Exchange, Gold Bull, issue 1, pp.9-13.
  16. E. Y. Kim et al., 2001 : Selective Recovery of Gold from Waste Mobile Phone PCVs by Hydrometallurgical Process, Journal of Hazardous Materials, 198, pp.206-215.
  17. N. V. Nguyen et al., 2010 : Adsorption of Gold(III) from Waste Rinse Water of Semiconductor Manufacturing Industries using Amberlite XAD-7HP Resin, Gold Bull, issue 3, pp.200-208.
  18. M. Iglesias, E. Antico, and V. Salvado, 1999 : Recovery of Palladium(II) and Gold(III) from Diluted Liquors using the Resin Duolite GT-73, Anal. Chim. Acta, 381, pp.61-67. https://doi.org/10.1016/S0003-2670(98)00707-7