DOI QR코드

DOI QR Code

A Study on the Improvement of Safety Certification Marks Displayed on the Surface of Temporary Equipments at Construction Site (II) : Marking Method and Location

건설현장에 사용되는 가설기자재의 안전인증표시 개선방안 연구(II) : 표시방법 및 표시위치

  • Jeong, Seong-Choon (Occupational Safety Research Bureau, Occupational Safety and Health Research Institute) ;
  • Bong, Jin Kyun (Department of Safety Engineering, Chungbuk National University) ;
  • Won, Jeong Hun (Department of Safety Engineering, Chungbuk National University)
  • Received : 2018.01.25
  • Accepted : 2018.02.13
  • Published : 2018.02.28

Abstract

This study investigated the improvement of safety certification marking method and location marked on temporary equipments in order to guarantee the quality and safety of temporary equipments. The survey was performed for the stakeholder (manufacturers, lessors, and users) to find out the effective way that all stakeholder can agree each other. The main reason which users checked the safety certification making is that the mandatory safety certification marking can prevent the usage of poor and illegal temporary equipments. For the marking method, all stakeholder agreed that a depressed engraving method was an effective and usable displaying method. The opinions about the position of safety certification marking among the users, lessors, and manufacturers did not come into the agreement. The manufacturers preferred the marking position in which the engraving process is easy, but users wanted the conspicuous place such as vertical member. However, it is necessary to continuously study ways to adopt the position preferred by the users.

Keywords

References

  1. S. C. Jeong and H. K Lee, "A Study on the Survey and Improvement of Safety Certifications in Temporary Equipment and Material", Journal of the Regional Association of Architectural Institute of Korea, Vol 18, No 2, pp. 171-180, 2016.
  2. S. C. Jeong and H. K Lee, "A Study on the Comparative Analysis of the Quality Management System of Temporary Equipment and Materials", Journal of the Architectural Institute of Korea Structure & Construction, Vol 32, No 9, pp. 43-50, 2016. https://doi.org/10.5659/JAIK_SC.2016.32.9.43
  3. The Board of Audit and Inspection of Korea, "Audit Reports-Actual Condition of Quality Control for Construction Materials -", 2016.
  4. K. M. Woo and H. K. Lee, "A Comparative Study on the Performance Testing System of Temporary Equipment and Materials in Domestic and Foreign", Journal of the Architectural Institute of Korea Structure & Construction, Vol. 18, No. 7, pp. 123-130, 2002.
  5. K. M. Woo and H. K. Lee, "A Comparative Study on Domestic and Foreign the Follow-up Service of Temporary Equipment and Materials", Korean Journal of Construction Engineering and Management, Vol. 3, No. 1, pp. 74-82, 2002.
  6. G. H. Choi, "Enhancement of Safety Certification of Industrial Machines and Devices", J. Korean Soc. Saf., Vol. 28, No. 8, pp. 7-12, 2013.
  7. B. H. Won, K. W. Yoon and S. S. Jeon, "Survey and Improvement Scheme for Safety Certification System of Temporary Equipment and Materials", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 17, No. 7, pp. 92-102, 2016. https://doi.org/10.5762/KAIS.2016.17.7.92
  8. D. W. Kim, J. H. Won, Y. K. Park and S. J. Lim, "A Study on the Improvement of Safety Certification Marks Displayed on the Surface of Temporary Equipments at Construction Site (I) : Stakeholder Cognition Analysis and Marking Contents", J. Korean Soc. Saf., Vol. 32, No. 4, pp. 59-65, 2017. https://doi.org/10.14346/JKOSOS.2017.32.4.59