Structural Engineering and Mechanics

  • 제66권2호
  • /
  • Pages.195-201
  • /
  • 2018
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Curvature ductility prediction of high strength concrete beams

  • Bouzid, Haytham (Department of Civil Engineering, Laboratory of Structures, Geotechnics and Risks (LSGR), Hassiba Benbouali University of Chlef) ;
  • Kassoul, Amar (Department of Civil Engineering, Laboratory of Structures, Geotechnics and Risks (LSGR), Hassiba Benbouali University of Chlef)
  • 투고 : 2017.05.28
  • 심사 : 2018.02.14
  • 발행 : 2018.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

From the structural safety point of view, ductility is an important parameter, a relatively high level of curvature ductility would provide to the structure an increased chance of survival against accidental impact and seismic attack. The ductility of reinforced concrete beams is very important, because it is the property that allows structures to dissipate energy in seismic zone. This paper presents a revision of an earlier formula for predicting the curvature ductility factor of unconfined HSC beams to make it simpler in the use. The new formula is compared with the earlier formula and other numerical and experimental results. The new formula regroups all parameters can affecting the curvature ductility of unconfined HSC beams and it has the same domain of application as the earlier formula.

키워드

참고문헌

  1. ACI 318 (2011), Building Code Requirements for Structural Concrete and commentary (ACI 318R-14), American Concrete Institute; Farmington Hills, MI, U.S.A.
  2. ACI 318 (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), American Concrete Institute, Farmington Hills, MI, U.S.A.
  3. Arslan, G. and Ercan, C. (2010), "Curvature ductility prediction of reinforced high strength concrete beam sections", J. Civil Eng. Manage., 16(4), 462-470. https://doi.org/10.3846/jcem.2010.52
  4. AS 3600 (2009), Australian Concrete Structures Standard, Standards Australia, Sydney, Australia.
  5. Baji, H., Ronagh, H.R. and Melchers, R.E. (2016), "Reliability of ductility requirements in concrete design codes", Struct. Safety, 62, 76-87. https://doi.org/10.1016/j.strusafe.2016.06.005
  6. Baji, H. and Ronagh, H.R. (2015), "Probabilistic models for curvature ductility and moment redistribution of RC beams", Comput. Concrete, 16(2), 191-207. https://doi.org/10.12989/cac.2015.16.2.191
  7. Barker, M.R. and Puckett, A.I. (2013), Design of Highway Bridges an LRFD Approach, John Wiley & Sons, Inc, Hoboken, New Jersey, U.S.A.
  8. Bouzid, H. and Kassoul, A. (2016), "Curvature ductility of high strength concrete beams according to Eurocode 2", Struct. Eng. Mech., 58(1), 1-19. https://doi.org/10.12989/sem.2016.58.1.001
  9. CSA-A23.3 (2004), Design of Concrete Structures for Building, Canadian Standards Association, Ontario, Canada.
  10. EN 1992-1-1 (2004), Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  11. EN 1998-1 (2003), Design of Structures for Earthquake Resistance Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  12. Fb Model Code (2010), First Completed Draft, Federation International du Beton, Lausanne, Switzerland.
  13. Ho, J.C.M., Lam, J.Y.K. and Kwan, A.K.H. (2012), "Flexural ductility and deformability of concrete beams incorporating high-performance materials", Struct. Des. Tall Spec. Build., 21(2), 114-132. https://doi.org/10.1002/tal.579
  14. Hong, G.H. (2011), "Flexural performance evaluation of reinforced concrete beams with high-strength concrete and reinforcing bars", J. Archit Inst. Kor., 27(6), 49-56.
  15. Jang, I.Y., Park, H.G., Kim, S.S., Kim, J.H. and Kim, Y.G. (2008), "On the ductility of high-strength concrete beams", Int. J. Concrete Struct. Mater., 2(2), 115-122. https://doi.org/10.4334/IJCSM.2008.2.2.115
  16. Lee, H.J. (2013a), "Predictions of curvature ductility factor of reinforced concrete beam sections used high strength concrete and steel", J. Kor. Soc. Civil Eng., 33(2), 483-493. https://doi.org/10.12652/Ksce.2013.33.2.483
  17. Lee, H.J. (2013b), "Evaluation on moment-curvature relations and curvature ductility factor of reinforced concrete beams with high strength materials", J. Kor. Concrete Inst., 25(3), 283-294. https://doi.org/10.4334/JKCI.2013.25.3.283
  18. Maghsoudi, A.A. and Bengar, H.A. (2006), "Flexural ductility of HSC members", Struct. Eng. Mech., 24(2), 195-212. https://doi.org/10.12989/sem.2006.24.2.195
  19. Maghsoudi, A.A. and Sharifi, Y. (2009), "Ductility of high strength concrete heavily steel reinforced memb", Sci. Iran. Trans. A Civil Eng., 16(4), 297-307.
  20. Mohammad, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013), "Ductility and strength assessment of hsc beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  21. NZS 3101 (2006), Concrete Structures Standard-Part1-The Design of Concrete Structures, Standards New Zealand, New Zealand.
  22. Park, R. and Ruitong, D. (1988), "Ductility of doubly reinforced beam sections", ACI Struct. J., 85-S24.
  23. Rashid, M.A. and Mansur, M.A. (2005), "Reinforced highstrength concrete beams in flexure", ACI Struct. J., 102(3), 462-471.
  24. Shohana, I., Maina, K. and Noor, M.A. (2012), "Beam ductility experiment using 500 grade steel", Int. J. Sci. Eng. Inves., 1(1), 1-6.