References
- "REGULATION (EC) No 715/2007 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL", Official Journal of the European Union, 2007, pp. L171/1- L171/16.
- H. G. Roh, H. S. Jeon and C. S. Lee, "Effect of multiple injection and injection pressure on the combustion and emission characteristics in a passenger car CRDI diesel engine", Transaction of KSAE, Spring Conference, 2007, pp. 352-357.
- S. H. Park, H. J. Kim, S. H. Kim and C. S. Lee, "Sprayatomization Characteristics of Biodiesel Fuel with Multiple Injection", Transactions of KSAE, Vol. 18, No. 4, 2010, pp. 40-47.
- J. S. Kim, K. H. Kim, H. S. Lee, S. W. Lim, H. Y. Kang and D. K. Koh, "Effects of the Fuel Injection Timing on the Combustion Characteristics in CRDI Diesel Engine", Journal of KSPSE, Vol. 15, No. 5, 2011, pp. 10-15.
- H. G. Roh, D. J. Lee and C. S. Lee, "Effect of Injection Strategy on the Exhaust Emission and Performance Characteristics of a Light-duty Diesel Engine", Transactions of KSAE, Vol. 19, No. 3, 2011, pp. 99-105.
- S. H. Min, and H. K. Suh, "Numerical Study on the Effect of Nozzle Geometry on the Small CRDI Engine Performance", Journal of ILASS-Korea, Vol. 20, No. 4, 2015, pp. 254-260. https://doi.org/10.15435/JILASSKR.2015.20.4.254
- S. W. Park and R. D. Reitz, "A gas jet superposition model for CFD modeling of group-hole nozzle sprays", International Journal of Heat and Fluid Flow, Vol. 30, 2009, pp. 1193-1201. https://doi.org/10.1016/j.ijheatfluidflow.2009.06.002
- Stephen R. Turns, "An Introduction to Combustion Concepts and Applications", McGraw-Hill, 2012, pp. 179-186.
- D. T. Hountalas, G. C. Mavropoulos, and K. B. Binder, "Effect of exhaust gas recirculation (EGR) temperature for various EGR rates on heavy duty DI diesel engine performance and emissions", Journal of Energy Vol. 33, 2008, pp. 272-283. https://doi.org/10.1016/j.energy.2007.07.002
- Y. S. Park, and C. S. Bae, "Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine", Journal of Applied Energy, Vol 133, 2014, pp. 308-316.
- M. R. Wei, T. S. Nguyen, R. F. Turkson and J. P. Liu, "Water injection for higher engine performance and lower emissions", Journal of the Energy Institute, Vol. 90, 2017, pp. 285-299. https://doi.org/10.1016/j.joei.2015.12.003
- R. H. Stanglmaier, P. J. Dingle and D. W. Stewart, "Cycle-controlled water injection for steady-state and transient emissions reduction from a heavy-duty diesel engine", Journal of Engineering for Gas Turbine and Power, Vol. 130, No. 3, 2008.
- X. K. Ma, F. J. Zhang, K. Han, Z. X. Zhu, and Y. Y. Liu, "Effects of Intake Manifold Water Injection on Combustion and Emissions of Diesel Engine", Journal of Energy Procedia, Vol. 61, 2014, pp. 777-781. https://doi.org/10.1016/j.egypro.2014.11.963
- G. K. Kokkulunk, G. V. Gonca, V. Z. Ayhan, I. Cesur and A. Parlak, "Theoretical and experimental investigation of diesel engine with steam injection system on performance and emission parameters", Journal of Applied Thermal Engineering, Vol. 54, 2013, pp. 161-170. https://doi.org/10.1016/j.applthermaleng.2013.01.034
- S. K. Park, S. C. Woo, H. I. Kim and K. H. Lee, "The characteristic of spray using diesel water emulsified fuel in a diesel engine", Journal of Applied Energy, Vol. 176, 2016, pp. 209-220. https://doi.org/10.1016/j.apenergy.2016.05.069
- Z. B. Chen, X. C. Wang, Y. Q. A. Pei, C. L. Zhang, M. W. Xiao and J. G. He, "Experimental investigation of the performance and emissions of diesel engines by a novel emulsified diesel fuel", Journal of Energy Conversion and Management, Vol. 95, 2015, pp. 334-341. https://doi.org/10.1016/j.enconman.2015.02.016
- AVL List GbmH, "AVL Fire Version 2013 ESE Diesel (Engine Simulation Environment) Module Manual", 2012.
- AVL List GbmH, "AVL Fire Version 2013.2 Spray Module Manual", 2013.
- W. Bosch, "The Fuel Rate Indicator : A New Measuring Instrument for Display of the Characteristics of Individual Injection", SAE 660749, 1966.