References
- J. Lee, K. Kim, J. Kim, J. Jang and S. Park, "Comparisons of the Particle Emission Characteristics Between GDI and MPI Vehicles", Journal of ILASS-Korea, Vol. 19, No. 4, 2014, pp. 182-187. https://doi.org/10.15435/JILASSKR.2014.19.4.182
- J. Lee and Y. Lee, "The combustion and Emission Characteristics with increased fuel injection pressure in a gasoline direct injection engine", Journal of ILASS-Korea, Vol. 22, No. 1, 2017, pp. 1-7. https://doi.org/10.15435/JILASSKR.2017.22.1.1
- H. J. Kim, J. H. Keel, G. W. Kang, S. M. Kim and J. S. Kim, "Investigation on the Exhaust Emission Characteristics of GDI Vehicles According to Various Mileage", Journal of ILASS-Korea, Vol. 22, No. 1, 2017, pp. 8-12. https://doi.org/10.15435/JILASSKR.2017.22.1.8
- K. E. Lee, N. Y. Kim, Y. J. Cho, D. R. Lee and S. Park, "Modeling dynamic behavior and injection characteristics of a GDI Injector", Journal of ILASS-Korea, Vol. 22, No. 4, 2017, pp. 210-217. https://doi.org/10.15435/JILASSKR.2017.22.4.210
- A. A. Reddy and J. M. Mallikarjuna, "Parametric study on a gasoline direct injection engine - A CFD analysis", SAE paper 2017-26-0039, 2017.
- A. Cavicchi, L. Postrioti, N. Giovannoni, S. Fontanesi, G. Bonandrini and R. D. Gioia, "Numerical and experimental analysis of the spray momentum flux measuring on a GDI injector", Fuel, Vol. 206, 2017, pp. 614-627. https://doi.org/10.1016/j.fuel.2017.06.054
- J. Jung, H. Oh and C. Bae, "LPG spray characteristics in a multi-hole injector for gasoline direct injection", Journal of ILASS-Korea, Vol. 19, No. 1, 2014, pp. 1-8. https://doi.org/10.15435/JILASSKR.2014.19.1.001
- L. Wang, J. A. Badra, W. L. Roberts and T. Fang, "Characteristics of spray from a GDI fuel injector for naphtha and surrogate fuels", Fuel, Vol. 190, 2017, pp. 113-128. https://doi.org/10.1016/j.fuel.2016.11.015
- G. Y. Park, S. H. Kang, I. G. Kim, C. S. Lim, J. M. Kim, Y. S. Cho and S. W. Lee, "An experimental study on the spray and lean combustion characteristics of Bio-ethanol- gasoline blended fuel of GDI", Journal of ILASS-Korea, Vol. 19, No. 3, 2014, pp. 115-122. https://doi.org/10.15435/JILASSKR.2014.19.3.115
- Y. Huang, S. Huang, R. Huang and G. Hong, "Spray and evaporation characteristics of ethanol and gasoline direct injection in non-evaporating, transition and flash-boiling conditions", Energy Conversion and Management, Vol. 108, 2016, pp. 68-77. https://doi.org/10.1016/j.enconman.2015.10.081
- B. Wang, Y. Jiang, P. Hutchins, T. Badawy, H. Xu, X. Zhang, A. Rack and P. Tafforeau, "Numerical analysis of deposit effect on nozzle flow and spray characteristics of GDI injectors", Applied Energy, Vol. 204, 2017, pp. 1215-1224. https://doi.org/10.1016/j.apenergy.2017.03.094
- S. Lee and S. Park, "Spray atomization characteristics of a GDI injector equipped with a group-hole nozzle", Fuel, Vol. 137, 2014, pp. 50-59.
- "Gasoline fuel injector spray measurement and characterization", SAE J2715, 2007.
- J. Park, D. Shin and S. H. Park, "Study on the injection characteristics using injection rate in a direct-injection gasoline injector with multi-hole", Journal of ILASS-Korea, Vol. 21, No. 1, 2016, pp.19-28.
- J. Tian, M. Zhao, W. Long, K. Nishida, T. Fujikawa and W. Zhang, "Experimental study on spray characteristics under ultra-high injection pressure for DISI engines", Fuel, Vol. 186, 2016, pp. 365-374. https://doi.org/10.1016/j.fuel.2016.08.086
- R. Payri, A. Garcia, V. Domenech, R. Durrett and A. H. Plazas, "An experimental study of gasoline effects on injection rate, momentum flux and spray characteristics using a common rail diesel injection system", Fuel, Vol.97, 2012, pp. 390-399.
- S. H. Park, H. J. Kim, H. K. Suh and C. S. Lee, "Atomization and spray characteristics of bioethanol and bioethanol blended gasoline fuel injected through a direct injection gasoline injector", International Journal of Heat and Fluid Flow, Vol. 30, 2009, pp. 1189-1192.
- Lefebvre, "Atomization and sprays", CRC Press, Vol. 1040, No. 2756, 1989.
- H. Hiroyasu, M. Arai, "Structures of Fuel Sprays in Diesel Engines", SAE paper, 900475, 1990.
- S. H. Park, S. H. Yoon and C. S. Lee, "HC and CO emissions reduction by early injection strategy in a bioethanol blended diesel-fueled engine with a narrow angle injection system", Applied Energy, Vol. 107, 2013, pp. 81-88. https://doi.org/10.1016/j.apenergy.2013.02.015