Fig. 1. Finite element models used for FEM.
Fig. 1. Finite element models used for FEM.
Fig. 2. Effect of number of particles on stick-slip.
Fig. 2. Effect of number of particles on stick-slip.
Fig. 3. Effect of applied pressure on stick-slip (1).
Fig. 3. Effect of applied pressure on stick-slip (1).
Fig. 4. Effect of applied pressure on stick-slip (2).
Fig. 4. Effect of applied pressure on stick-slip (2).
Table 1. Simulation conditions for FEM
Table 1. Simulation conditions for FEM
Table 2. Mechanical properties of the materials used in the simulation
Table 2. Mechanical properties of the materials used in the simulation
Table 3. Stress values obtained from FE analysis
Table 3. Stress values obtained from FE analysis
참고문헌
- Kim, H. J., "Effect of brush treatment and brush contact sequence on cross contaminated defects during CMP in-situ cleaning," J. Korean Soc. Tribol. Lubr. Eng., Vol. 31, No. 6, pp. 239-244, 2015. https://doi.org/10.9725/kstle.2015.31.6.239
- Park, S., Im, S., Lee, H., "Effect of pressure on edge delamination in chemical mechanical polishing of SU-8 film on silicon wafer," J. Korean Soc. Tribol. Lubr. Eng., Vol. 33, No. 6, pp. 282-287, 2017.
- Wang, Y. G., Zhang, L. C., Biddut, A., "Chemical effect on the material removal rate in the CMP of silicon wafers," Wear, Vol. 270, No. 3-4, pp. 312-316, 2011. https://doi.org/10.1016/j.wear.2010.11.006
- Kwon, T.-Y., Cho, B.-J., Ramachandran, M., Busnaina, A, A., Park, J.-G., "Investigation of source-based scratch formation during oxide chemical mechanical planarization," Tribol, Lett., Vol. 50, No. 2, pp. 169-175, 2013. https://doi.org/10.1007/s11249-012-0098-2
- Kim, H.-J., Yang, J. C., Yoon, B. U., Lee, H.-D., Kim, T. S., "Nano-scale stick-slip friction model for the chatter scratch generated by chemical mechanical polishing process," J. Nanosci. Nanotechnol., Vol. 12, No. 7, pp. 5683-5686, 2012. https://doi.org/10.1166/jnn.2012.6389
- Yang, W. Y., Sung, I.-H., "abrasive particle behavior and the change in the material properties of a pad used in chemical mechanical polishing (CMP)," Journal of the KSME, pp. 113-114, 2012.
- Wang, Y., Zhao, Y., Li, X., "Modeling the effects of abrasive size, surface oxidizer concentration and binding energy on chemical mechanical polishing at molecular scale," Tribol. Int., Vol. 41, No. 3, pp. 202-210, 2008. https://doi.org/10.1016/j.triboint.2007.08.004
- Park, C. W., Shin, M. W., Jang, H., "Friction-induced stick-slip intensified by corrosion of gray iron brake disc," Wear, Vol. 309, pp. 89-95, 2014. https://doi.org/10.1016/j.wear.2013.11.008
- Cho, W., Ahn, Y. M., Baek, C.-W., Kim, Y.-K., "Effect of mechanical process parameter on chemical mechanical polishing of Al thin films," Microelectron. Eng., Vol. 65, pp. 13-23, 2003. https://doi.org/10.1016/S0167-9317(02)00726-8
- Lee, H. S., Park, B. Y., Seo, H. D., Park, K. H., Jeong, H. D., "A study on the characteristics of stick-slip friction in CMP", J. Korean Inst. Electr. Electron. Mater. Eng., Vol. 18, No. 4, pp. 313-320, 2005. https://doi.org/10.4313/JKEM.2005.18.4.313
피인용 문헌
- 화학기계적 연마기술 연구개발 동향: 입자 거동과 기판소재를 중심으로 vol.35, pp.5, 2019, https://doi.org/10.9725/kts.2019.35.5.274