한국초전도ㆍ저온공학회논문지 (Progress in Superconductivity and Cryogenics)

  • 제20권4호
  • /
  • Pages.50-54
  • /
  • 2018
  • /
  • 1229-3008(pISSN)
  • /
  • 2287-6251(eISSN)
한국초전도저온학회 (The Korean Society of Superconductivity and Cryogenics)
권호 표지
DOI QR코드

DOI QR Code

Analysis of AC losses in HTS coils by temperature variations

  • 투고 : 2017.08.03
  • 심사 : 2018.12.18
  • 발행 : 2018.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We analyzed the temperature dependency of the AC losses in high temperature superconducting (HTS) coils. In the case of a short sample of an HTS tape, the magnetization loss at 4.2 K could be higher than the one at 77 K for a same transport current. It happens when the perpendicular magnetic field is above a certain magnitude. The AC loss characteristics of solenoidal coils have been analyzed at the temperatures of 65 K and 77 K. They were categorized by the aspect ratios. The operating current of a solenoid was normally set about 70 % of the critical current. An HTS solenoid with the same operating current of 77 K causes larger AC losses at 65 K in the most cases of the HTS solenoids. We also analyzed the AC loss characteristics due to the temperature variations for three types of superconducting magnetic energy storages. Two of them were solenoidal types and the other was toroidal type. The results showed the tendency for the coils to have higher AC losses at lower temperature with the same operating currents and scenarios.

키워드

CJJOCB_2018_v20n4_50_f0002.png 이미지

Fig. 3. The normalized loss (loss@65 K to loss@77 K) according to (α, β) for a1= 50 [mm]. Most solenoids except very thin ones have larger AC losses at 65 K when the operating AC currents are same at both temperatures, (a) 1.01 <α< 5, (b) 1.01 <α< 1.1.

CJJOCB_2018_v20n4_50_f0003.png 이미지

Fig. 5. Bird’s eye views of three SMESs. (a) 600 kJ solenoidal type, (b) 2.5 MJ toroidal type, (c) 5 MJ solenoidal type.

CJJOCB_2018_v20n4_50_f0004.png 이미지

Fig. 1. Calculated magnetization losses of an HTS tape by magnetic flux densities of at 4.2 K and 77 K.

CJJOCB_2018_v20n4_50_f0005.png 이미지

Fig. 2. Definition of HTS coil shape. The ratio of α=a2/a1, β=b1/a1.

CJJOCB_2018_v20n4_50_f0006.png 이미지

Fig. 4. B-I curves of the 4 mm width HTS tape.

TABLE I THE OPERATING TEMPERATURE RANGES OF HTS APPLICATIONS.

CJJOCB_2018_v20n4_50_t0001.png 이미지

TABLE II SPECIFICATION OF 2G HTS TAPE FOR THE ANALYSIS.

CJJOCB_2018_v20n4_50_t0002.png 이미지

TABLE III SPECIFICATIONS OF THREE SMESS.

CJJOCB_2018_v20n4_50_t0003.png 이미지

Fig.6. Operating scenarios of SMES. Scenario 1 is full discharging condition and scenario 2 is repetition of charging and discharging.

CJJOCB_2018_v20n4_50_t0004.png 이미지

TABLE IV. THE CALCULATED AC LOSSES OF THREE SMESS.

CJJOCB_2018_v20n4_50_t0005.png 이미지

참고문헌

  1. H. K. Yeom, "An Experimental Study of the Conduction Cooling System for the 600 kJ HTS SMES,"IEEE Trans. Appl. Supercond., vol. 18, no. 2, Jun. 2008, pp.741-744. https://doi.org/10.1109/TASC.2008.921217
  2. P. Tixador et al., "Design and First Tests of a 800 kJ HTS SMES," in IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 1967-1972, June 2007. https://doi.org/10.1109/TASC.2007.898520
  3. M. J. Park et al., "AC Loss and Thermal Stability of HTS Model Coils for a 600 kJ SMES," in IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 2418-2421, June 2007. https://doi.org/10.1109/TASC.2007.899107
  4. M. Park, "Conceptual Design of HTS Magnet for a 5 MJ Class SMES,"IEEE Trans. Appl. Supercond., vol. 18, no. 2, Jun. 2008, pp.750-753. https://doi.org/10.1109/TASC.2008.922533
  5. S.Y. Lee, S.Y. Kwak, J.H. Seo, S.Y. Lee, S.H. Park, W.S. Kim, J.K. Lee, J.H. Bae, S.H. Kim, K.D. Sim, K.C. Seong, H.K. Jung, K. Choi, S. Hahn, Optimal design of HTS magnets for a modular toroid-type 2.5 MJ SMES using multi-grouped particle swarm optimization, Physica C: Superconductivity, Volume 469, Issues 15-20, 15 October 2009, Pages 1789-1793. https://doi.org/10.1016/j.physc.2009.05.149
  6. E. H. Brandt, "Type-II superconductor strip with current in a perpendicular magnetic field,"Physical Rev.B, Vol. 48, No. 17, 12893, 1993 https://doi.org/10.1103/PhysRevB.48.12893
  7. John. R. Hull, "Applications of high-temperature superconductors in power technology,"Appl. Phys 66. (2003), pp.1865-1886.
  8. T. Masuda, "High-temperature Superconducting Cable Technology and Development Trends," SEI Tech. Review. no. 59, Jan. 2005, pp.8-13.
  9. G. Snitchler, "The Performance of a 5 MW High Temperature Superconductor Ship Propulsion Motor," IEEE Trans. Appl. Supercond., vol. 15, no. 2, Jun. 2005, pp.2206-2209. https://doi.org/10.1109/TASC.2005.849613
  10. G. Snitchler, "10 MW Class Superconductor Wind Turbine Generators,"IEEE Trans. Appl. Supercond., vol. 21, no. 3, Jun. 2011, pp.1089-1092 https://doi.org/10.1109/TASC.2010.2100341