참고문헌
- ACI Committee 116 (2000), Cement and concrete terminology, American Concrete Institute, ACI 116R-00, pp. 1-73.
- ACI Committee 229 (1999), Controlled Low-Strength Materials (CLSM), American Concrete Institute, ACI 229R-99, pp. 1-15.
- ASTM D 4832 (2002), Standard test method for preparation and testing of Controlled Low Strength Material (CLSM) Test Cylinders, American Society for Testing Materials, pp. 1-5.
- ASTM D 6103 (2004), Standard test method for flow consistency of Controlled Low-Strength Material (CLSM), American Society for Testing and Materials, pp. 1-5.
- Bae, Y. S., Shin, S. Y., Won, J. S. and Lee, D. H. (2016), The road subsidence conditions and safety improvement plans in Seoul, The Seoul Institute, pp. 1-60 (in Korean).
- Bae, Y. S., Kim, K. T. and Lee, S. Y. (2017), The road subsidence status and safety improvement plans, Journal of the Korea Academy Industrial Cooperation Society, Vol. 18, No. 1, pp. 545-552 (in Korean). https://doi.org/10.5762/KAIS.2017.18.1.545
- Byun, K. J., Song, H. W. and Park, S. S. (1997), Development of lightweight foamed concrete using polymer foam agernt, Journal of the Korea Concrete Institute, Vol. 9, No. 1, pp. 165-172 (in Korean).
- Byun, Y. H., Han, W. J., Tutumluer, E. and Lee, J. S. (2016), Elastic wave characterization of controlled low-strength material using embedded piezoelectric transducers, Construction and Building Materials, Vol. 127, pp. 210-219. https://doi.org/10.1016/j.conbuildmat.2016.09.113
- Cheon, S. H., Jeong, S. S., Lee, D. S. and Kim, D. H. (2006), Mechanical characteristics of accelerated flowable backfill materials using surplus soil for underground power utilities, Journal of the Korean Society of Civil Engineers, Vol. 26, No. 5, pp. 303-312 (in Korean).
- Do, T. M., Kim, Y. S. and Ryu, B. C. (2015), Improvement of engineering properties of pond ash based CLSM with cementless binder and artificial aggregates made of bauxite residue, International Journal of Geo-Engineering, Vol. 6, No. 8.
- Do, T. M. and Kim, Y. S. (2016), Engineering properties of Controlled Low Strength Material (CLSM) incorporating red mud, International Journal of Geo-Engineering, Vol. 7, No. 7.
- Han, W. J., Lee, J. S., Cho, S. D., Kim, J. H. and Byun, Y. H. (2015), Study on correlation between compressive strength and compressive wave velocity for CLSM according to curing time, Journal of the Korean Geo-Environmental Society, Vol. 16, No. 11, pp. 5-11 (in Korean).
- Han, W. J., Lee, J. S., Byun, Y. H., Cho, S. D. and Kim, J. H. (2016a), Characteristics of shear waves in controlled low strength material with curing time, Journal of the Korean Geo-Environmental Society, Vol. 17, No. 3, pp. 13-19 (in Korean).
- Han, W. J., Lee, J. S., Byun, Y. H., Cho, S. D. and Kim, J. H. (2016b), Study on characteristics of controlled low strength material using time domain reflectometry, Journal of the Korean Geo-Environmental Society, Vol. 17, No. 4, pp. 33-37 (in Korean).
- Hwang, J. Y. and Song, X. M. (1997), Replacing Al powder with Al slag or recycled foil in cellular concrete, JOM Journal of the Minerals, Metals and Materials Society, Vol. 49, No. 8, pp. 29-30.
- Juillerat, F. K., Gonzenbach, U. T. and Gauckler, L. J. (2012), Tailoring the hierarchical pore structures in self-setting particle-stabilized foams made from calcium aluminate cement, Materials Letters, Vol. 70, pp. 152-154. https://doi.org/10.1016/j.matlet.2011.12.006
- Jung, M. Y. (2012), Manufacturing technology of the autoclaved lightweight concrete with the ground granulated blast furnace slag, Review of Architecture and Building Science, Vol. 56, No. 8, pp. 41-47 (in Korean).
- Kang, D. K. (2016), Dynamic behavior of quay wall structure backfilled with lightweight air-foamed soil, Ph. D. Thesis, Incheon National University, pp. 146 (in Korean).
- Kim, Y. S., Dang, M. Q. and Do, T. M. (2016), Studies on compressive strength of sand stabilized by alkali-activated ground bottom ash and cured at the ambient conditions, International Journal of Geo-Engineering, Vol. 7, No. 15.
- Kong, J. Y., Kang, H. N. and Chun, B. S. (2010), Characteristics of unconfined compressive strength and flow in controlled low strength materials made with coal ash, Journal of the Korean Geotechnical Society, Vol. 26, No. 1, pp. 75-83 (in Korean).
- KS F 2409 (2016), Method of test for unit mass and air content of fresh concrete, Korean Standards association, pp. 1-9 (in Korean).
- Lee, S. M. and Yoon, H. M. (2017), A study for improvement of policy on ground subsidence prevention in urban areas, Seoul Studies, Vol. 18, No. 1, pp. 27-42 (in Korean).
- Lee, Y. J., Yea, G. G., Park, S. W. and Kim, H. Y. (2015), Behavior characteristics of underground flexible pipe backfilled with lightweight foamed soil, Journal of Korean Geosynthetics Society, Vol. 14, No. 1, pp. 43-50 (in Korean).
- Naik, T. R., Kraus, R. N., Chun, Y., Siddique, R. and Botha, E. D. (2004), Properties of flowable self-compacting slurry using quarry by-products and ponded CCPs, Special Publication, Vol. 221, pp. 523-538.
- Park, S. S., Song, H. W. and Byun, K. J. (1997), Mechanical properties of lightweight foamed concrete using polymer foam agernt, Journal of the Korea Concrete Institute, Vol. 9, No. 1, pp. 173-181 (in Korean).
- Pons, F., Landwermeyer, J. S. and Kerns, L. (1998), Development of engineering properties for regular and quick-set flowable fill, The design and application of controlled low-strength materials (Flowable fill), ASTM International, pp. 67-86.
- Public Works Research Institute (2007), Manual for utilization of liquefied stabilized soil, Gihodo Shuppan Co., Ltd., pp. 121 (in Japanese).
- Saikia, N., Cornelis, G., Cizer, O., Vandecasteele, C., Van Gemert, D., Van Balen, K. and Van Gerven, T. (2012). Use of Pb blast furnace slag as a partial substitute for fine aggregate in cement mortar, Journal of Material Cycles and Waste Management, Vol. 14, No. 2, pp. 102-112. https://doi.org/10.1007/s10163-012-0043-3
- Sang, G., Zhu, Y., Yang, G. and Zhang, H. (2015), Preparation and characterization of high porosity cement-based foam material, Construction and Building Materials, Vol. 91, pp. 133-137. https://doi.org/10.1016/j.conbuildmat.2015.05.032
- Seo, D. W. (2010), Engineering characteristics of lightweight foamed concrete used for backfill of the structure, Master's thesis, Hanyang University, pp. 58 (in Korean).
- Takahashi, M., Ito, H., Abe, H. and Tanaka, H. (1994), A study of fluidity requirement for slurry backfill material using surplus soil, 1st Symposium on Soil Improvement, The Society of Materials Science, pp. 67-86.