Steel and Composite Structures

  • 제26권1호
  • /
  • Pages.103-113
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fatigue performance of rib-roof weld in steel bridge decks with corner braces

  • Fu, Zhongqiu (College of Civil and Transportation Engineering, Hohai University) ;
  • Ji, Bohai (College of Civil and Transportation Engineering, Hohai University) ;
  • Wang, Yixun (College of Civil and Transportation Engineering, Hohai University) ;
  • Xu, Jie (College of Civil and Transportation Engineering, Hohai University)
  • 투고 : 2017.06.26
  • 심사 : 2017.09.29
  • 발행 : 2018.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

To study the effects of corner braces on fatigue performance of the U-rib and roof weld in steel bridge decks, the fatigue experiment was carried out to compare characteristics of the crack shape with and without corner braces. The improvement of fatigue life and stress variation after setting corner braces were also analysed. Different parameters of corner brace sizes, arrangements, and detail types were considered in the FEM models to obtain stress distribution and variation at the weld. Furthermore, enhancement of the fatigue performance by corner braces was evaluated. The results demonstrated that the corner brace could improve the fatigue life of the U-rib and roof weld, which exerted even no influence on the crack shape. Moreover, stress of the roof weld was decreased and the crack position was transferred from the root weld to U-rib and corner brace weld. It was suggested no weld scallop should be drilled on the corner brace. A transverse rib with lower height which was set between U-ribs was favourable for improvement of fatigue performance.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Fund of China, Central Universities

참고문헌

  1. Aljabar, N.J., Zhao, X.L., Al-Mahaidi, R., Ghafoori, E., Motavalli, M. and Powers, N. (2016), "Effect of crack orientation on fatigue behavior of cfrp-strengthened steel plates", Compos. Struct., 152, 295-305. https://doi.org/10.1016/j.compstruct.2016.05.033
  2. Colombi, P. and Fava, G. (2016), "Fatigue crack growth in steel beams strengthened by cfrp strips", Theor. Appl. Fract. Mech., 85, 173-182. https://doi.org/10.1016/j.tafmec.2016.01.007
  3. De, F.B.P. and Kolstein, M.H. (2015), "Strengthening a bridge deck with high performance concrete", Prog. Struct. Eng. Mater., 59(4), 263-273.
  4. Fan, Y., Zhao, X. and Liu, Y. (2016), "Research on fatigue behavior of the flash welded joint enhanced by ultrasonic peening treatment", Mater. Des., 94, 515-522. https://doi.org/10.1016/j.matdes.2016.01.070
  5. Fu, Z.Q., Ji, B.H., Ye, Z. and Wang, Y.X. (2017a), "Fatigue evaluation of cable-stayed bridge steel deck based on predicted traffic flow growth", KSCE J. Civil Eng., 21(4), 1400-1409. https://doi.org/10.1007/s12205-016-1033-0
  6. Fu, Z.Q., Ji, B.H., Zhang, C.Y. and Li, D. (2017b), "Experimental study on the fatigue performance of roof and u-rib welds of orthotropic steel bridge decks", KSCE J. Civil Eng., 22(1), 270-278.
  7. Guo, T. and Chen, Y.W. (2013), "Fatigue reliability analysis of steel bridge details based on field-monitored data and linear elastic fracture mechanics", Struct. Infrastr. Eng., 9(5), 496-505. https://doi.org/10.1080/15732479.2011.568508
  8. Ilman, M.N., Muslih, M.R., Subeki, N. and Wibowo, H. (2016), "Mitigating distortion and residual stress by static thermal tensioning to improve fatigue crack growth performance of mig aa5083 welds", Mater. Des., 99, 273-283. https://doi.org/10.1016/j.matdes.2016.03.049
  9. Japan Road Association (2002), Guideline for Fatigue Design of Steel Highway Bridges. (in Japanese)
  10. Ji, B.H., Liu, R., Chen, C., Maeno, H. and Chen, X.F. (2013), "Evaluation on root-deck fatigue of orthotropic steel bridge deck", J. Constr. Steel Res., 90(5), 174-183. https://doi.org/10.1016/j.jcsr.2013.07.036
  11. Jua, X. and Tateishi, K. (2014), "Fatigue crack behavior at rib-to-deck weld bead in orthotropic steel deck", Adv. Struct. Eng., 17(10), 1459-1468. https://doi.org/10.1260/1369-4332.17.10.1459
  12. Kainuma, S., Yang, M., Jeong, Y.S., Inokuchi, S., Kawabata, A. and Uchida, D. (2016), "Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decks", J. Constr. Steel Res., 119, 113-122. https://doi.org/10.1016/j.jcsr.2015.11.014
  13. Kolase, P.K. and Desai, A.K. (2015), "Steel fiber reinforced concrete pavement: a review", Int. J. Innov. Res. Sci. Technol., 1(10), 274-276.
  14. Krejsa, M., Kala, Z. and Seitl, S. (2016), "Inspection based probabilistic modeling of fatigue crack progression", Procedia Eng., 142, 145-152.
  15. Nassiraei, H., Lotfollahi-Yaghin, M.A. and Ahmadi, H. (2016), "Static strength of offshore tubular t/y-joints reinforced with collar plate subjected to tensile brace loading", Thin Wall. Struct., 103, 141-156. https://doi.org/10.1016/j.tws.2016.02.010
  16. Saberi, M.R., Rahai, A.R., Sanayei, M. and Vogel, R.M. (2016), "Bridge fatigue service-life estimation using operational strain measurements", J. Bridge Eng., 21(5), 04016005. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000860
  17. Sakagami, T. (2015), "Remote nondestructive evaluation technique using infrared thermography for fatigue cracks in steel bridges", Fatig. Fract. Eng. Mater. Struct., 38(7), 755-779. https://doi.org/10.1111/ffe.12302
  18. Shao, X., Yi, D., Huang, Z., Zhao, H., Chen, B. and Liu, M. (2013), "Basic performance of the composite deck system composed of orthotropic steel deck and ultrathin rpc layer", J. Bridge Eng., 18(5), 417-428. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000348
  19. Xie, F.X., Ji, B.H., Yuanzhou, Z.Y., Fu, Z.Q. and Ge, H.B. (2016), "Ultrasonic detecting method and repair technology based on fatigue crack features in steel box girder", J. Perform. Constr. Facil., 30(2), 04015006. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000725
  20. Yang, M.Y., Ji, B.H., Yuanzhou, Z.Y. and Fu, Z.Q. (2016), "Fatigue behavior and strength evaluation of vertical stiffener welded joint in orthotropic steel decks", Eng. Fail. Anal., 70, 222-236. https://doi.org/10.1016/j.engfailanal.2016.05.001
  21. Zhang, S., Shao, X., Cao, J., Cui, J., Hu, J. and Deng, L. (2016), "Fatigue performance of a lightweight composite bridge deck with open ribs", J. Bridge Eng., 21(7), 04016039. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000905

피인용 문헌

  1. Fatigue property analysis of U rib-to-crossbeam connections under heavy traffic vehicle load considering in-plane shear stress vol.38, pp.3, 2018, https://doi.org/10.12989/scs.2021.38.3.271
  2. Effect of welding defects on mechanical properties of welded joints subjected to temperature vol.40, pp.2, 2018, https://doi.org/10.12989/scs.2021.40.2.193