그림 1. 풍력발전기의 구조 Fig. 1 Structure of wind turbine
그림 2. 일반적인 마그네틱 기어의 구조 Fig. 2 Structure of conventional magnetic gear
그림 3. 하이브리드 마그네틱 기어의 구조 Fig. 3 Structure of hybrid magnetic gear
그림 4. Model A, B의 내측 회전자 토크 Fig. 4 Inner rotor torque of model A and B
그림 5. Model A, B의 외측 회전자 토크 Fig. 5 Outer rotor torque of model A and B
그림 6. Model A, B의 철손 Fig. 6 Iron loss of Model A and B
그림 7. 제동 시 Model A, B의 발생 토크 Fig. 7 Torque when Model A and B stopped
표 1. Model A, B의 제원 Table 1. Specifications of model A and model B
표 2. Model A, B의 철손 Table 2. Iron loss of Model A and B
참고문헌
- Huh and J. Lee, "A Study on The Modeling and Operation Control of A Variable Speed Synchronous Wind Power System," J. of the Korea Institute of Electronic Communication Sciences, vol. 10, no. 8, 2015, pp. 935-944. https://doi.org/10.13067/JKIECS.2015.10.8.935
- J. Kim, Y. Park, I. Kim, and Y. Kim, "Characteristics Analysis of Induction Generator with a Change in Rotor Speed," Trans. of the Korean Institute of Electrical Engineers, vol. 60, no. 12, 2011, pp. 2225-2229. https://doi.org/10.5370/KIEE.2011.60.12.2225
- S. Heier, Grid Integration of Wind Energy Conversion Systems, Hoboken: John Wiley & Sons, 1998.
- K. Pankaj and J. Nelson, "Application Guidelines for Induction Generators," IEEE Int. Electric Machines and Drives Conf., Milwaukee, Wisconsin, USA: May 1997, pp. WC1/5.1-WC1/5.3
- J. Kim, "Characteristics Analysis of 3-phase Induction Generator at the Unbalanced Load Operation," Trans. of the Korean Institute of Electrical Engineers P, vol. 56, no. 3, 2007, pp. 123-128.
- K. Lee, W. Cho, J. Back, and I. Choy, "Design and Verification of Disturbace Observer based Controller for Windturbine with Two Cooperative Generators," J. of the Korea Institute of Electronic Communication Science, vol. 12, no. 2, 2017, pp. 301-308. https://doi.org/10.13067/JKIECS.2017.12.2.301
- Y. Lee, G. Lee, and Y. Nam, "Hydraulic Pitch Control device and Brake for Wind Turbines," J. of Drive and Control, vol. 8, no. 1, 2011, pp. 60-65. https://doi.org/10.7839/ksfc.2011.8.1.060
- J. Kim, Y. Park, and J. Kim, "Reduction of Inrush Current during Grid Interconnection of Squirrel Cage Induction Generator," Proc. of KIIEE Annual Conf., Jeongseon, Korea, May 2017, pp. 14.
- J. Lee, K. Lee, D. Lee, D. Lee, and S. Hwang, "Contack Stress Analysis of a Pair of Mating Spur Gears," J. of Korean Society for Precision Engineering, vol. 9, no. 4, 2010, pp. 59-65.
- T. Lubin, S. Mezani, and A. Rezzoug, "Analytical Computation of the Magnetic Field Distribution in a Magnetic Gear," IEEE Trans. Magnetics, vol. 46, no. 7, 2010, pp. 2611-2621. https://doi.org/10.1109/TMAG.2010.2044187
- E. Park, S. Kim, S. Jung, and Y. Kim, "Correlation Analysis between Air Gaps and Torque Characteristics of Magnetic Gear," In 2016 Electrical Machinery and Energy Conversion Systems Society Spring Conf. of the Korean Institute of Electrical Engineers, Jeju, Korea, Mar. 2016, pp. 223-225.
- K. Atallah, and D. Howe, "A Novel High-Performance Magnetic Gear," IEEE Trans. Magnetics, vol. 37, no. 4, July 2001, pp. 2844-2846. https://doi.org/10.1109/20.951324
- C. Kim, E. Park, S. Kim, and Y. Kim, "An Study on Pole Piece Shape for Improving Torque Ripple of Magnetic Gears," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 6, 2017, pp. 1065-1070. https://doi.org/10.13067/JKIECS.2017.12.6.1065
- S. Kim, D. Kim, D. Lee, C. Gim, and Y. Kim, "Analysis of Efficiency and Loss due to Number of Poles in Magnetic Gears," J. of the Korea Institute of Electronic Communication Sciences, vol. 13, no. 5, 2018, pp. 1023-1028. https://doi.org/10.13067/JKIECS.2018.13.5.1023
- J. Nam, H. Ryou, and S. Cho, "Study for Characteristic of Frictional Heat Transfer in Rotating Brake System," J. of the Korea Academia-Industrial cooperation Society, vol. 18, no. 10, 2017, pp. 817-822. https://doi.org/10.5762/KAIS.2017.18.10.817