DOI QR코드

DOI QR Code

Lateral Load Distribution Estimation of a PSC Girder Bridge from Dynamic Loading Test

동적재하시험을 통한 PSC 거더교의 횡분배 측정

  • 김성완 (부산대학교 지진방재연구센터) ;
  • 정진환 (부산대학교 건설융합학부) ;
  • 김성도 (경성대학교 건설환경도시공학부) ;
  • 박재봉 (한국시설안전공단 시설성능연구소) ;
  • 이명진 (국립재난안전연구원 방재연구실)
  • Received : 2017.01.23
  • Accepted : 2017.02.15
  • Published : 2017.05.01

Abstract

Since the bridge is the main facility of the road that is the core of the civil infrastructure, the bridge is constructed to ensure stability and serviceability during the traffic use. In order to secure the safety of bridges, evaluating the integrity of bridges at present is an important task in the maintenance work of bridges. In general, to evaluate the load carrying capacity of bridges, it is possible to confirm the superimposed behavior and symmetric behavior of bridges by estimating the lateral load distribution factor of the bridges through vehicle loading tests. However, in order to measure the lateral load distribution factor of a commonly used bridge, a static loading test is performed. There is a difficulty in traffic control. Therefore, in this study, the static displacement component of the bridge measured in the dynamic loading test and the ambient vibration test was extracted by using empirical mode decomposition technique. The lateral load distribution was estimated using the extracted static displacement component and compared with the lateral load distribution factor measured in the static loading test.

교량은 사회간접시설물의 핵심이 되는 도로의 주요 시설물이므로 공용기간 동안 안정성과 사용성이 확보될 수 있도록 건설되며, 교량의 안전성 확보를 위하여 현재 상태에서 건전성을 평가하는 것은 유지관리 업무에서 중요한 과제이다. 일반적으로 교량의 내하력 평가를 위해 차량재하시험을 통하여 횡분배율을 측정함으로써 교량의 중첩거동 및 대칭거동을 확인할 수 있다. 그러나 공용중인 교량의 횡분배율을 측정하기 위하여 정적재하시험을 수행하고 있으며 교통통제의 어려움이 있다. 따라서 본 연구에서는 동적재하시험 및 상시진동시험에서 측정된 교량의 변위응답 데이터를 경험적 모드분해기법을 이용하여 정적 성분의 변위를 추출하였다. 추출된 정적 성분의 변위를 이용하여 횡분배율을 추정하였으며, 정적재하시험에서 측정된 횡분배율과 비교하였다.

Keywords

References

  1. Chang, P. C., Flatau, A.,and Liu, S. C. (2003), Review Paper: Health monitoring of civil infrastructure, Structural Health Monitoring, 2(3), 257-267. https://doi.org/10.1177/1475921703036169
  2. Chang, S. J., and Kim, N. S. (2012), Estimation of Displacement Response from FBG Strain Sensors Using Empirical Mode Decomposition Technique, Experimental Mechanics, 52(6), 573-589. https://doi.org/10.1007/s11340-011-9522-z
  3. Cheng, J., Yu, D., and Yang, Y. (2006). Research on the intrinsic mode function (IMF) criterion in EMD method, Mechanical Systems and Signal Processing, 20, 817-824. https://doi.org/10.1016/j.ymssp.2005.09.011
  4. Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N. C., Tung, C. C., and Liu, H. H. (1998). The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Royal Society of London Proceedings Series A, 454, 903-995.
  5. Jung, C. M. (2011), Investigation of the behavior of lateral load distribution of railway PSC girder bridges, Journal of the Korea Contents Association, 11(1), 422-428. https://doi.org/10.5392/JKCA.2011.11.1.422
  6. Kim, S. W., Lee, S. S., Kim, N. S., and Kim, D. J. (2013), Numerical model validation for a prestressed concrete girder bridge by using image signals, KSCE Journal of Civil Engineering, 17(3), 509-517. https://doi.org/10.1007/s12205-013-0560-1
  7. Ohgaki, K., Yabe, J., Kawaguchi, Y. F. (1999), Experimental study on ultimate strength of plate girders with large web aspect ratio and web width to thickness ratio, 2nd European conference on steel structures.
  8. Tarhini, K. M., and Frederick, G. R. (1992), Wheel Load Distribution in I-Girder Highway Bridge, Journal of Structural Engineering, ASCE., 118(5), 1285-1294. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1285)
  9. Wang, N., O'Malley, C., Ellingwood, B. R., and Zureick, A. H. (2011), Bridge rating using system reliability assessment. I: Assessment and verification by load testing. Journal of Bridge Engineering, 16, 854-862. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000172
  10. Yoon, D. Y. and Eun, S. W. (2006), Effect of cross beams on live load distribution in rolled H-beam bridges, Journal of Korean Society of Steel Construction, 18(5), 535-541.
  11. Yoon, D. Y. and Lee, S. C. (2005), Effects of Cross Beam on Live Load Distribution in Steel Box Girder Bridges, Journal of the Korean Society of Civil Engineers, 11(1), 422-428.