DOI QR코드

DOI QR Code

Pressure analysis in grouting and water pressure test to achieving optimal pressure

  • Amnieh, Hassan Bakhshandeh (School of Mining, College of Engineering, University of Tehran) ;
  • Masoudi, Majid (Department of Mining Engineering, Faculty of Engineering, University of Kashan) ;
  • Kolahchi, Reza (Department of Civil Engineering, Meymeh Branch, Islamic Azad University)
  • 투고 : 2016.11.30
  • 심사 : 2017.04.27
  • 발행 : 2017.10.25

초록

In order to determine the rate of penetrability, water pressure test is used before the grouting. One of the parameters which have the highest effect is pressure. Mathematical modeling is used for the first time in this study to determine the optimum pressure. Thus, the joints that exist in the rock mass are simulated using cylindrical shell model. The joint surroundings are also modeled through Pasternak environment. In order to validate the modeling, pressure values obtained by the model were used in the sites of Seymareh and Aghbolagh dams and the relative error rates were measured considering the differences between calculated and actual pressures recorded in these operations. In water pressure test, in Seymareh dam, the error values were equal to 4.75, 3.93, 4.8 percent and in the Aghbolagh dam, were 22.43, 5.22, 2.6 percent and in grouting operation in Seymareh dam were equal to 9.09, 32.50, 21.98, 5.57, 29.61 percent and in the Aghbolagh dam were 2.96, 5.40, 4.32 percent. Due to differences in rheological properties of water and grout and based on the overall results, modeling in water pressure test is more accurate than grouting and this error in water pressure test is 7.28 percent and in grouting is 13.92 percent.

키워드

참고문헌

  1. Arani, A.G., Kolahchi, R. and Barzoki, A.M. (2011), "Effect of material in-homogeneity on electro-thermomechanical behaviors of functionally graded piezoelectric rotating shaft", Appl. Math Model., 35(6), 2771-2789. https://doi.org/10.1016/j.apm.2010.11.076
  2. Arani, A.J. and Kolahchi, R. (2016), "Buckling analysis of embedded concrete columns armed with carbon nanotubes", Comput. Concrete, 17(5), 567-578. https://doi.org/10.12989/cac.2016.17.5.567
  3. Broujerdian, V. and Kazemi, M.T. (2016), "Nonlinear finite element modeling of shear-critical reinforced concrete beams using a set of interactive constitutive laws", J. Civ. Eng., 14(8), 507-519.
  4. Chang, M., Mao, T.W. and Huang, R.C. (2016), "A study on the improvements of geotechnical properties of in-situ soils by grouting", Geomech. Eng., 10(4), 527-546. https://doi.org/10.12989/gae.2016.10.4.527
  5. Cleary, M.P., Johnson, D.E., Kogsboll, H.H., Owens, K.A., Perry, K.F., De Pater, C.J. and Mauro, T. (1993), "Field implementation of proppant slugs to avoid premature screen-out of hydraulic fractures with adequate proppant concentration", Proceedings of the Low Permeability Reservoirs Symposium, Denver, Colorado, U.S.A., April.
  6. Creager, M. and Paris, P.C. (1997), "Elastic field equations for blunt cracks with reference to stress corrosion cracking", J. Fract. Mech., 3(4), 247-252.
  7. Darn-Horng, H., Vu To-Anh, P. and Chi-Chang, H. (2016), "An experimental investigation on dynamic properties of various grouted sands", Geomech. Eng., 10(1), 77-94. https://doi.org/10.12989/gae.2016.10.1.077
  8. Economides, M.J. (1990), "Implications of cementing on well performance", Dev. Petro. Sci., 28, 1-1.
  9. El Tani, M. (2012), "Grouting rock fractures with cement grout", Rock Mech. Rock Eng., 45(4), 547-561. https://doi.org/10.1007/s00603-012-0235-0
  10. Fattah, M.Y., Al-Saidi, A.A. and Jaber, M.M. (2015), "Improvement of bearing capacity of footing on soft clay grouted with lime-silica fume mix", Geomech. Eng., 8(1), 113-132. https://doi.org/10.12989/gae.2015.8.1.113
  11. Fett, T. (1999), "Estimated stress intensity factors for semi-elliptical cracks in front of narrow circular notches", Eng. Fract. Mech., 64(3), 357-362. https://doi.org/10.1016/S0013-7944(99)00077-6
  12. Gang, Z., Xiaoshuang, Z., You, D. and Huayang, L. (2016), "Experimental study on the performance of compensation grouting in structured soil", Geomech. Eng., 10(3), 335-355. https://doi.org/10.12989/gae.2016.10.3.335
  13. Garagash, D.I. (2003), "Evolution of a plane-strain fracture driven by a power-law fluid", Proceedings of the 16th ASCE Engineering Mechanics Conference, Seattle, Washington, U.S.A., July.
  14. Gulrajani, S.N., Nolte, K.G. and Romero, J. (1997), "Evaluation of the M-Site B-sand fracture experiments: The evolution of a pressure analysis methodology", Proceedings of the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., October.
  15. Houlsby, A.C. (1990), Construction and Design of Cement Grouting: A Guide to Grouting in Rock Foundations, John Wiley & Sons, New York, U.S.A.
  16. Johnson, E. and Cleary, M.P. (1991), "Implications of recent laboratory experimental results for hydraulic fractures", Proceedings of the Low Permeability Reservoirs Symposium, Denver, Colorado, U.S.A., April.
  17. Lhomme, T.P.Y. (2005), "Initiation of hydraulic fractures in natural sandstones", Delft University of Technology, The Netherlands.
  18. Mack, M.G. and Elbel, J.L. (1994), "A Simulator for Modeling Acid Fracturing Treatments", Proc.
  19. Rice, J.R. (1968), "Mathematical analysis in the mechanics of fracture", Fract. Adv. Treat., 2, 191-311.
  20. Showkati, A., Maarefvand, P. and Hassani, H. (2015), "Theoretical determination of stress around a tensioned grouted anchor in rock", Geomech. Eng., 8(3), 441-460. https://doi.org/10.12989/gae.2015.8.3.441
  21. Shroff, A.V. and Shah, D.L. (1999), Grouting Technology in Tunnelling and Dam Construction, A.A. Balkema.
  22. Tavakoli Mehrjardi, G. and Moghaddas Tafreshi, S.N. and Dawson, A. (2015), "Numerical analysis on Buried pipes protected by combination of geocell reinforcement and rubber-soil mixture", J. Civ. Eng., 13(2), 90-104.
  23. Tolppanen, P. and Syrjanen, P. (2003), Hard Rock Tunnel Grouting Practice in Finland, Sweden, and Norway-Literature Study, Finnish Tunnelling Association.
  24. Van Dam, D.B. (1999), "The influence of inelastic rock behaviouron hydraulic fracture geometry", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands.
  25. Van de Ketterij, R.G. (2001), "Optimisation of the near-wellbore geometry of hydraulic fractures propagating from cased perforated completions", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands.
  26. Vinegar, H.J., Wills, P.B., DeMartini, D.C., Shlyapobersky, J., Deeg, W.F.J., Adair, R.G., Woerpel, J.C., Fix, J.E. and Sorrells, G.G. (1992), "Active and passive seismic imaging of a hydraulic fracture in diatomite", J. Petro. Tech., 44(1), 28-90. https://doi.org/10.2118/22756-PA
  27. Wang, L. and Ni, Q. (2009), "A reappraisal of the computational modelling of carbon nanotubes conveying viscous fluid", Mech. Res. Commun., 36(7), 833-837. https://doi.org/10.1016/j.mechrescom.2009.05.003
  28. Weijers, L. (1995), "The near-wellbore geometry of hydraulic fractures initiated from horizontal and deviated wells", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands.
  29. Wong, H.Y. and Farmer, I.W. (1973), "Hydrofracture mechanisms in rock during pressure grouting", Rock Mech., 5(1), 21-41. https://doi.org/10.1007/BF01246755
  30. Yew, C.H. and Weng, X. (2014), Mechanics of Hydraulic Gracturing, Gulf Professional Publishing.
  31. Zhu, H.Y., Deng, J.G., Zhao, J., Zhao, H., Liu, H.L. and Wang, T., (2014), "Cementing failure of the casingcement- rock interfaces during hydraulic fracturing", Comput. Concrete, 14(1), 91-107. https://doi.org/10.12989/cac.2014.14.1.091

피인용 문헌

  1. Field and numerical investigation of sealing the ultra-thick dolomite aquifer for a vertical shaft by surface pre-grouting vol.14, pp.4, 2017, https://doi.org/10.1007/s12517-021-06620-7
  2. RETRACTED ARTICLE: Mountain rainfall forecast and regional environmental economic development model based on remote sensing images vol.14, pp.12, 2017, https://doi.org/10.1007/s12517-021-07405-8
  3. RETRACTED ARTICLE: Air pollution atmospheric environment detection and global tourism line planning management based on genetic algorithm vol.14, pp.17, 2017, https://doi.org/10.1007/s12517-021-07967-7