DOI QR코드

DOI QR Code

Accelerated Life Prediction of CPB(cold-pad-batch) Padder Roll Rubber to Chemical Degradation

CPB(Cold-Pad-Batch) 염색 패더롤 고무에서 화학적 노화로 인한 가속 수명예측

  • Lim, Jee Young (Smart Textiles Group, Korea Institute of Industrial Technology) ;
  • Nam, Chang Woo (Smart Textiles Group, Korea Institute of Industrial Technology) ;
  • Lee, Woosung (Smart Textiles Group, Korea Institute of Industrial Technology)
  • 임지영 (한국생산기술연구원 스마트섬유그룹) ;
  • 남창우 (한국생산기술연구원 스마트섬유그룹) ;
  • 이우성 (한국생산기술연구원 스마트섬유그룹)
  • Received : 2017.08.25
  • Accepted : 2017.09.16
  • Published : 2017.09.27

Abstract

In CPB(Cold-Pad-Batch) dyeing, the rubber of the padder roll is influenced by the heat, chemical and mechanical influences and thus aging of the padder roll rubber occurs. This study presents an accelerated thermal aging test of the CPB padder roll rubber with strong alkali conditions. Using Arrhenius formula of the various property values for the various aging temperatures($80^{\circ}C$, $90^{\circ}C$, $100^{\circ}C$) of the padder roll, the accelerated life predictions could be calculated. The threshold value of the property was set at different values. The hardness was set at the point where 5% degradation occurs based on the actual use conditions, and the tensile strength was set at the point where 50% degradation occurs based on the general life prediction standards. From the results of the different physical properties at differing temperatures, the Arrhenius plot could be obtained. Through the usage of the Arrhenius Equation, significant duration expectation could be predicted, and the chemical aging behavior of the CPB padder roll could be found at the arbitrary and actual temperatures.

Keywords

References

  1. Z. Khatri, M. Memon, and K. Brohi, "Energy, Environment and Sustainable Development", Springer, Verlag, Wien, pp.299-305, 2012.
  2. C. Y. Park, Y. C. Han, W. K. Lee, M. G. Lee, and S. K. Min, Effect of SBR and NBR Blend Composition on the Properties of Rubber Roller Used in Gravure Offset Printing, J. of Korean Society for Imaging Science and Technology, 10(4), 12(2004).
  3. W. D. Kim, W. S. Kim, C. S. Woo, and S. J. Cho, Prediction of Useful Life by Heat Aging of Motor Fan Isolating Rubber, Elastomer, 37(2), 107(2002).
  4. R. P. Brown, "Practical Guide to the Assessment of the Useful Life of Rubbers", Rapra Technology, UK, 2001.
  5. C. S. Woo and S. S. Choi, Effects of Thermal Aging on Properties and Life-time Prediction of NBR and EPDM Vulcanizates, Elastomer, 40(2), 119(2005).
  6. S. S. Choi and J. C. Kim, Chlorine Effect on Thermal Aging Behaviors of BR and CR Composites, Bull. Kor. Chem. Soc., 31, 2613(2010). https://doi.org/10.5012/bkcs.2010.31.9.2613
  7. N. J. Morrison and M. Porter, Temperature Effects on the Stability of Intermediates and Crosslinking in Sulfur Vulcanization, Rubber Chem. Technol., 57, 63(1984). https://doi.org/10.5254/1.3536002
  8. W. S. Choi, G. W. Kim, J. S. Do, M. H. Yoo, and S. H. Rye, Thermal Aging Behavior of H-NBR/NBR Blend, Elastomers and Composites, 46(2), 132(2011).
  9. C. H. Chen, J. L. Koenig, J. R. Shelton, and E. A. Collins, Characterization of the Reversion Process in Accelerated Sulfur Curing of Natural Rubber, Rubber Chem. Technol., 54, 734(1981). https://doi.org/10.5254/1.3535831
  10. S. S. Choi, Bond Dissociation of Sulfur Crosslinks in IR and BR Vulcanizates using Semi-empirical Calculations, Kor. Polym. J., 5, 39(1997).
  11. K. C. Cho, E. H. Lee, S. O. Jo, S. W. Park, Y. S. Hwang, and S. Y. Kim, A Study on the Characteristic of Contact Pressure for CPB(Cold Pad Batch) Padder Roll Controlled by Hydraulic Single Cell, Textile Coloration and Finishing, 29(2), 86(2017). https://doi.org/10.5764/TCF.2017.29.2.86
  12. J. Diani, B. Fayolle, and P. Gilormini, A Review on the Mullins Effect, European Polymer J., 45, 601(2009). https://doi.org/10.1016/j.eurpolymj.2008.11.017