Structural Engineering and Mechanics

  • 제64권1호
  • /
  • Pages.71-79
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mode III SIFs for interface cracks in an FGM coating-substrate system

  • 투고 : 2017.05.26
  • 심사 : 2017.07.11
  • 발행 : 2017.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, interaction of several interface cracks located between a functionally graded material (FGM) layer and an elastic layer under anti-plane deformation based on the distributed dislocation technique (DDT) is analyzed. The variation of the shear modulus of the functionally graded coating is modeled by an exponential and linear function along the thickness of the layer. The complex Fourier transform is applied to governing equation to derive a system of singular integral equations with Cauchy type kernel. These equations are solved by a numerical method to obtain the stress intensity factors (SIFs) at the crack tips. The effects of non-homogeneity parameters for exponentially and linearly form of shear modulus, the thickness of the layers and the length of crack on the SIFs for several interface cracks are investigated. The results reveal that the magnitude of SIFs decrease with increasing of FG parameter and thickness of FGM layer. The values of SIFs for FGM layer with exponential form is less than the linear form.

키워드

참고문헌

  1. Asadi, E. Fariborz, S.J. and Fotuhi, A.R. (2012), "Anti-plane analysis of orthotropic strips with defects and imperfect FGM coating", Euro. J. Mech. A/Solids, 34, 12-20. https://doi.org/10.1016/j.euromechsol.2011.11.007
  2. Chiang, C.R. (1989), "Mode III interface crack propagation", Eng. Fract. Mech., 32, 545-550. https://doi.org/10.1016/0013-7944(89)90188-4
  3. Champion, C.R. and Atkinson, C.A. (1990), "Mode III crack at the interface between two nonlinear materials", Proc. R. Soc. Series A, Math. Phy. Eng. Sci., 429, 247-257. https://doi.org/10.1098/rspa.1990.0059
  4. Chan, Y.S., Paulino, G.H. and Fannjiang, A.C. (2001), "The crack problem for nonhomogeneous materials under anti plane shear loading-a displacement based formulation", Int. J. Solid. Struct., 38, 2989-3005. https://doi.org/10.1016/S0020-7683(00)00217-1
  5. Chen, Y.J. and Chue, C.H. (2009), "Mode III crack problems of two bonded functionally graded strips with internal cracks", Int. J. Solids. Struct., 46, 331-343. https://doi.org/10.1016/j.ijsolstr.2008.08.031
  6. Chue, C.H. and Yeh, C.N. (2010), "Mode III fracture problem of two arbitrarily oriented cracks located within two bonded functionally graded material strips", Meccanica, 46, 447-469.
  7. Cheng, Z., Gao, D. and Zhong, Z. (2012), "Interface crack of two dissimilar bonded functionally graded strips with arbitrary distributed properties under plane deformations", Int. J. Mech. Sci., 54, 287-293. https://doi.org/10.1016/j.ijmecsci.2011.11.009
  8. Delale, F. and Erdogan, F. (1988), "Interface crack in a nonhomogeneous elastic medium", Int. J. Eng. Sci., 26, 559-568. https://doi.org/10.1016/0020-7225(88)90054-7
  9. Dag, S., Yildirim, B. and Erdogan, F. (2004), "Interface crack problems in graded orthotropic media, analytical and computational approaches", Int. J. Fract., 130, 471-496. https://doi.org/10.1023/B:FRAC.0000049497.81105.c4
  10. Ding, S.H. and Li, X. (2008), "Anti-plane problem of periodic interface cracks in a functionally graded coating-substrate structure", Int. J. Fract., 153, 53-62. https://doi.org/10.1007/s10704-008-9302-7
  11. Erdogan, F., Gupta, G.D., and Cook, T.S. (1973), "Numerical solution of integral equations", Ed. Sih GC, Methods of Analysis and Solution of Crack Problems, Leyden, Holland, Noordhoff.
  12. Erdogan, F. (1985), "The crack problem for bonded nonhomogeneous materials under anti plane shear loading", J. Appl. Mech., 52, 823-828. https://doi.org/10.1115/1.3169153
  13. Erdogan, F., Kaya, A.C. and Joseph, P.F. (1991), "The mode III crack problem in bonded materials with a nonhomogeneous interfacial zone", J. Appl. Mech., 58, 419-427. https://doi.org/10.1115/1.2897202
  14. Erdogan, F. and Wu, B. (1993), "Interface crack problems in layered orthotropic materials", J. Mech. Phys. Solid., 41, 889-917. https://doi.org/10.1016/0022-5096(93)90004-Y
  15. Farahpour, P., Babaghasabha, V. and Khadem, M. (2015), "Stress intensity factor calculation for semi-elliptical cracks on functionally graded material coated cylinders", Struct. Eng. Mech., 55, 1087-1097. https://doi.org/10.12989/sem.2015.55.6.1087
  16. Hills, D.A., Kelly, P.A., Dai, D.N. and Korsunsky, A.M. (1996), Solution of Crack Problems: The Distributed Dislocation Technique, Kluwer Academic Publishers.
  17. Jain, N., Rousseau, C.E. and Shukla, A. (2004), "Crack-tip stress fields in functionally graded materials with linearly varying properties", Theor. Appl. Fract. Mech., 42, 155-170. https://doi.org/10.1016/j.tafmec.2004.08.005
  18. Jin, Z.H. and Batra, R.C. (1995), "Interface cracking between functionally graded coatings and a substrate under anti plane shear", Int. J. Eng. Sci., 34, 1705-1716.
  19. Kargarnovin, M.H., Nasirai, C. and Torshizian, M.R. (2011), "Anti-plane stress intensity, energy release and energy density at crack tips in a functionally graded strip with linearly varying properties", Theor. Appl. Fract. Mech., 56, 42-48. https://doi.org/10.1016/j.tafmec.2011.09.003
  20. Lu, N.C., Cheng, J. and Cheng, Y.H. (2001), "Mode III interface crack propagation in two joined media with weak dissimilarity and strong orthotropy", Theor. Appl. Fract. Mech., 36, 219-231. https://doi.org/10.1016/S0167-8442(01)00073-8
  21. Zhanqi, C. and Zheng, Z. (2006), "Fracture analysis of a functionally graded strip under plane deformation", Acta. Mech. Solida. Sin., 19, 114-121. https://doi.org/10.1007/s10338-006-0613-9
  22. Lu, N.C., Yang, D.N., Cheng, Y.H. and Cheng, J. (2007), "Asymmetrical dynamic propagation problems on mode III interface crack", Appl. Math. Mech., 28, 501-510. https://doi.org/10.1007/s10483-007-0411-x
  23. Li, Y.D., Tan, W. and Lee, K.Y. (2008), "Stress intensity factor of an anti-plane crack parallel to the weak/micro- discontinues interface in a bi-FGM composite", Acta Mech. Solida. Sin., 21, 34-43. https://doi.org/10.1007/s10338-008-0806-5
  24. Ming-Che, L. and Erdogan, F. (1983), "Stress intensity factors in two bonded elastic layers containing cracks perpendicular to and on the interface-I. Analysis", Eng. Fract. Mec., 18, 491-506 . https://doi.org/10.1016/0013-7944(83)90045-0
  25. Ming-Che, L. and Erdogan, F. (1983), "Stress intensity factors in two bonded elastic layers containing cracks perpendicular to and on the interface-II. Solution and results", Eng. Fract. Mech., 18, 507-528. https://doi.org/10.1016/0013-7944(83)90046-2
  26. Monfared, M.M. and Ayatollahi, M. (2015), "Cracking in orthotropic half-plane with a functionally graded coating under anti-plane loading", Acta. Mech. Solida Sin., 28, 210-220. https://doi.org/10.1016/S0894-9166(15)30009-4
  27. Monfared, M.M. and Bagheri, R. (2016), "Multiple interacting arbitrary shaped cracks in an FGM plane", Theor. Appl. Fract. Mech., 86, 161-170. https://doi.org/10.1016/j.tafmec.2016.07.001
  28. Nakamura, T. (1991), "Three-dimensional stress fields of elastic interface cracks", J. Appl. Mech., 58, 939-946. https://doi.org/10.1115/1.2897711
  29. Ren, J.H., Li, Y.S. and Wang, W. (2014), "A penny-shaped interfacial crack between piezoelectric layer and elastic halfspace", Struct Eng. Mech., 52, 1-17. https://doi.org/10.12989/sem.2014.52.1.001
  30. Torshizian, M.R. (2015), "Mode III stress intensity factor in twodimensional functionally graded material with lengthwise linearly varying properties", Arch. Appl. Mech., 85, 2009-2021. https://doi.org/10.1007/s00419-015-1034-3
  31. Yang, W.Y., Zhang, S.Q., Li, J.L. and Ma, Y.L. (2009), "Interface crack problems for mode II of double dissimilar orthotropic composite materials", Appl. Math. Mech., 30, 585-594. https://doi.org/10.1007/s10483-009-0505-z