DOI QR코드

DOI QR Code

The influence of convoy loading on the optimized topology of railway bridges

  • Jansseune, Arne (Department of Structural Engineering, Research group Schoonmeersen, Faculty of Engineering and Architecture, Ghent University) ;
  • De Corte, Wouter (Department of Structural Engineering, Research group Schoonmeersen, Faculty of Engineering and Architecture, Ghent University)
  • 투고 : 2017.03.11
  • 심사 : 2017.07.10
  • 발행 : 2017.10.10

초록

This paper presents the application of topology optimization as a design tool for a steel railway bridge. The choice of a steel railway bridge is dictated by the particular situation that it is suitable for topology optimization design. On the one hand, the current manufacturing techniques for steel structures (additive manufacturing techniques not included) are highly appropriate for material optimization and weight reduction to improve the overall structural efficiency, improve production efficiency, and reduce costs. On the other hand, the design of a railway bridge, especially at higher speeds, is dominated by minimizing the deformations, this being the basic principle of compliance optimization. However, a classical strategy of topology optimization considers typically only one or a very limited number of load cases, while the design of a steel railway bridge is characterized by relatively concentrated convoy loads, which may be present or absent at any location of the structure. The paper demonstrates the applicability of considering multiple load configurations during topology optimization and proves that a different and better optimal layout is obtained than the one from the classical strategy.

키워드

참고문헌

  1. Beghini, L.L., Beghini, A., Katz, N., Baker, W.F. and Paulino, G.H. (2014), "Connecting architecture and engineering through structural topology optimization", Eng. Struct., 59, 716-726. https://doi.org/10.1016/j.engstruct.2013.10.032
  2. Bendsoe, M.P. (1989), "Optimal shape design as a material distribution problem", Struct. Optim., 1(4), 193-202. https://doi.org/10.1007/BF01650949
  3. Bendsoe, M.P. and Sigmund, O. (2003), Topology Optimization: Theory, Methods and Applications, Springer-Verlag, Berlin Heidelberg, New York, NY, USA.
  4. Briseghella, B., Fenu, L., Lan, C., Mazzarolo, E. and Zordan, T. (2013), "Application of topological optimization to bridge design", J. Bridge Eng., 18(8), 790-800. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000416
  5. Briseghella, B., Fenu, L., Yeng, Y., Lan, C., Mazzorolo, E. and Zordan, T. (2016), "Optimization indexes to identify the optimal design solution of shell-supported bridges", J. Bridge Eng., 21(3), 04015067. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000838
  6. CEN (2003), Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges, European Committee for Standardization, Brussels, Belgium.
  7. CEN (2006), Eurocode 3: Design of steel structures - Part 2: Steel bridges, European Committee for Standardization, Brussels, Belgium.
  8. Fauche, E., Adriaenssens, S. and Prevost, J.H. (2010), "Structural optimization of a thin-shell bridge structure", J. IASS, 51(2), 153-160.
  9. Huang, X. and Xie, Y.M. (2008), "Optimal design of periodic structures using evolutionary topology optimization", Struct. Multidiscip. O., 36(6), 597-606. https://doi.org/10.1007/s00158-007-0196-1
  10. Iwamura, R.S. and de Faria, A.R. (2013), "Topology optimization of multiple load case structures", Proceedings of International Symposium on Solid Mechanics, Porte Alegre, Brazil, April.
  11. Kutylowski, R. and Rasiak, B. (2014a), "Application of topology optimization to bridge girder design", Struct. Eng. Mech., 51(1), 39-66. https://doi.org/10.12989/sem.2014.51.1.039
  12. Kutylowski, R. and Rasiak, B. (2014b), "The use of topology optimization in the design of truss and frame bridge girders", Struct. Eng. Mech., 51(1), 67-88. https://doi.org/10.12989/sem.2014.51.1.067
  13. Liu, S. and Qiao, H. (2011), "Topology optimization of continuum structures with different tensile and compressive properties in bridge layout design", Struct. Multidiscip O., 43(3), 369-380. https://doi.org/10.1007/s00158-010-0567-x
  14. Luo, Y. and Kang, Z. (2012), "Topology optimization of continuum structures with Drucker-Prager yield stress constraints", Comput. Struct., 90, 65-75.
  15. Rahmatalla, S. and Swan, C.C. (2003), "Form finding of sparse structures with continuum topology optimization", J. Struct. Eng., ASCE, 129(12), 1707-1716. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1707)
  16. Rozvany, G.I.N. and Birker, T. (1994), "On singular topologies in exact layout optimization", Struct. Optim., 8(4), 228-235. https://doi.org/10.1007/BF01742707
  17. Simulia (2014a), ABAQUS 6.14 (computer software) Dassault Systemes Simulia Corp., Providence, RI, USA.
  18. Simulia (2014b), Tosca Structure (computer software) Dassault Systemes Simulia Corp., Providence, RI, USA.
  19. Stromberg, L.L., Beghini, A., Baker, W.F. and Paulino, G.H. (2012), "Topology optimization for braced frames: Combining continuum and beam/column elements", Eng. Struct., 37, 106-124. https://doi.org/10.1016/j.engstruct.2011.12.034
  20. Tang, J., Xie, Y.M. and Felicetti, P. (2014), "Conceptual design of buildings subjected to wind load by using topology optimization", Wind Struct., 18(1), 21-35. https://doi.org/10.12989/was.2014.18.1.021
  21. Viaduc de La Garde-Adhemar, Bureau Greisch, www.greisch.com/projet/viaduc_donzere_mondragon, Accessed 18 November 2016.
  22. Yang, R.J. and Chuang, C.H. (1994), "Optimal topology design using linear programming", Comput. Struct., 52(2), 265-275. https://doi.org/10.1016/0045-7949(94)90279-8
  23. Zuo, Z.H., Huang, X., Black, T. and Felicetti, P. (2014), "Application of topological optimisation technology to bridge design", Struct. Eng. Int., 24(2), 185-191. https://doi.org/10.2749/101686614X13830790993366
  24. Zuo, Z.H., Xie, Y.M. and Huang, X. (2012), "Evolutionary topology optimization of structures with multiple displacement and frequency constraints", Adv. Struct. Eng., 15(2), 359-372. https://doi.org/10.1260/1369-4332.15.2.359

피인용 문헌

  1. Bridge-type structures analysis using RMP concept considering shear and bending flexibility vol.74, pp.2, 2017, https://doi.org/10.12989/sem.2020.74.2.189