한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제16권4호
  • /
  • Pages.1-8
  • /
  • 2017
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

트랙터 트랜스미션용 후진 아이들 기어의 3D 프린팅 특성

3D Printing Characteristics of Reverse Idle Gears for Tractor Transmissions

  • 김해지 (경남과학기술대학교 자동차공학과)
  • Kim, Hae-Ji (Department of Automotive Engineering, Gyeongnam National University of Science and Technology)
  • 투고 : 2017.07.11
  • 심사 : 2017.07.23
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper concerns the possibility of 3D printing reverse idle gears for tractor transmission. For the purposes of this experiment, idle gears were manufactured using a SLA 3D printer, FDM 3D printer, and through machining. The accuracy of the idle gears produced in these three different ways were evaluated by the properties of their outer diameter, inner diameter, roundness, concentricity, parallelism, span, backlash, and gear grade. The tooth characteristics of the idle gears were evaluated by their profile, lead, and the pitch of the gears. The results of this experiment determined that the surface conditions created by the finishing process had a significant impact on the dimensional accuracy of the gears and the characteristics of their teeth.

키워드

참고문헌

  1. Kang Y. G., Lee, T. W. and Shin, G. S., "The Influence of Experiment Variables on 3D Printing using ABS Resin," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 94-101, 2017. https://doi.org/10.14775/ksmpe.2017.16.2.094
  2. Pyo, J. H., Yoo, C. J., Shin, J. K., Lee, T. G. and Shin, B. S., "A Study on the Design of Hiking Boots Equipped with GPS and its Midsole Manufactured by 3D Porous Polymer Printing Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 83-88, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.083
  3. Kang, B. S., Ahn, D. G., Shin, B. S. and Shin, J. K., "A Fundamental Study on Polymer/Metal Additive Method using a UV Laser for Consumer-oriented 3D Helmet Products," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 89-94, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.089
  4. Shim, H. R., Sa, M. W. and Kim, J. Y., "A Study on Fabrication of 3D Porous Scaffold Combined with Polymer Deposition System and a Salt Leaching Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 86-92, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.086
  5. Yun, H. Y., Kim, H. C. and Lee, I. H., "Fabrication of 3D-Printed Circuit Device using Direct-Write Technology," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 1-8, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.001
  6. Hwang, J. D., Yang, J. S., Yun, S. H. and Jung, Y. G., "Hybrid Technology using 3D Printing and 5-axis Machining for Development of Prototype of the Eccentric Drive System," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 38-45, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.038
  7. Lee, H. S., Na, Y. M., Kang, T. H., Park, J. K. and Park, T. G., "Design and Analysis of Aluminum Melting Machine in Fused Deposition Modeling Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 62-72, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.062
  8. Kim, D. B., Lee, G. T., Lee, I. H. and Cho, H. Y., "Finite Element Analysis for Fracture Criterion of PolyJet Materials," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 134-139, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.134
  9. Kim, H. J., "Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 63-68, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.063

피인용 문헌

  1. Study on Filter Efficiency and Lifetime Enhancement by using Internal Structures vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.149
  2. Latest Research Trends of 3D Printing in Korea vol.35, pp.9, 2017, https://doi.org/10.7736/kspe.2018.35.9.829