Journal of Korean Neurosurgical Society

The Korean Neurosurgical Society (대한신경외과학회)
권호 표지
DOI QR코드

DOI QR Code

Biomechanical Comparison of Inter-fragmentary Compression Pressures : Lag Screw versus Herbert Screw for Anterior Odontoid Screw Fixation

  • Park, Jin-Woo (Department of Neurosurgery, Kyungpook National University Hospital) ;
  • Kim, Kyoung-Tae (Department of Neurosurgery, Kyungpook National University Hospital) ;
  • Sung, Joo-Kyung (Department of Neurosurgery, Kyungpook National University Hospital) ;
  • Park, Seong-Hyun (Department of Neurosurgery, Kyungpook National University Hospital) ;
  • Seong, Ki-Woong (Department of Biomedical Engineering, Kyungpook National University Hospital) ;
  • Cho, Dae-Chul (Department of Neurosurgery, Kyungpook National University Hospital)
  • Received : 2017.02.22
  • Accepted : 2017.05.22
  • Published : 2017.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Objective : The purpose of the present study was to compare inter-fragmentary compression pressures after fixation of a simulated type II odontoid fracture with the headless compression Herbert screw and a half threaded cannulated lag screw. Methods : We compared inter-fragmentary compression pressures between 40- and 45-mm long 4.5-mm Herbert screws (n=8 and n=9, respectively) and 40- and 45-mm long 4.0-mm cannulated lag screws (n=7 and n=10, respectively) after insertion into rigid polyurethane foam test blocks (Sawbones, Vashon, WA, USA). A washer load cell was placed between the two segments of test blocks to measure the compression force. Because the total length of each foam block was 42 mm, the 40-mm screws were embedded in the cancellous foam, while the 45-mm screws penetrated the denser cortical foam at the bottom. This enabled us to compare inter-fragmentary compression pressures as they are affected by the penetration of the apical dens tip by the screws. Results : The mean compression pressures of the 40- and 45-mm long cannulated lag screws were $50.48{\pm}1.20N$ and $53.88{\pm}1.02N$, respectively, which was not statistically significant (p=0.0551). The mean compression pressures of the 40-mm long Herbert screw was $52.82{\pm}2.17N$, and was not statistically significant compared with the 40-mm long cannulated lag screw (p=0.3679). However, 45-mm Herbert screw had significantly higher mean compression pressure ($60.68{\pm}2.03N$) than both the 45-mm cannulated lag screw and the 40-mm Herbert screw (p=0.0049 and p=0.0246, respectively). Conclusion : Our results showed that inter-fragmentary compression pressures of the Herbert screw were significantly increased when the screw tip penetrated the opposite dens cortical foam. This can support the generally recommended surgical technique that, in order to facilitate maximal reduction of the fracture gap using anterior odontoid screws, it is essential to penetrate the apical dens tip with the screw.

Keywords

References

  1. Adla DN, Kitsis C, Miles AW : Compression forces generated by Mini bone screws--a comparative study done on bone model. Injury 36 : 65-70, 2005 https://doi.org/10.1016/j.injury.2004.03.026
  2. Andersson S, Rodrigues M, Olerud C : Odontoid fractures: high complication rate associated with anterior screw fixation in the elderly. Eur Spine J 9 : 56-59, 2000 https://doi.org/10.1007/s005860050009
  3. Apfelbaum RI, Lonser RR, Veres R, Casey A : Direct anterior screw fixation for recent and remote odontoid fractures. J Neurosurg 93(2 Suppl) : 227-236, 2000
  4. Assari S, Darvish K, Ilyas AM : Biomechanical analysis of second-generation headless compression screws. Injury 43 : 1159-1165, 2012 https://doi.org/10.1016/j.injury.2012.03.015
  5. Beadel GP, Ferreira L, Johnson JA, King GJ : Interfragmentary compression across a simulated scaphoid fracture--analysis of 3 screws. J Hand Surg Am 29 : 273-278, 2004 https://doi.org/10.1016/j.jhsa.2003.12.006
  6. Borm W, Kast E, Richter HP, Mohr K : Anterior screw fixation in type II odontoid fractures: is there a difference in outcome between age groups? Neurosurgery 52 : 1089-1092; discussion 1092-1094, 2003
  7. Burkhart KJ, Nowak TE, Appelmann P, Sternstein W, Rommens PM, Mueller LP : Screw fixation of radial head fractures: compression screw versus lag screw--a biomechanical comparison. Injury 41 : 1015-1019, 2010 https://doi.org/10.1016/j.injury.2010.03.001
  8. Chang KW, Liu YW, Cheng PG, Chang L, Suen KL, Chung WL, et al. : One Herbert double-threaded compression screw fixation of displaced type II odontoid fractures. J Spinal Disord 7 : 62-69, 1994 https://doi.org/10.1097/00002517-199407010-00009
  9. Chi YL, Wang XY, Xu HZ, Lin Y, Huang QS, Mao FM, et al. : Management of odontoid fractures with percutaneous anterior odontoid screw fixation. Eur Spine J 16 : 1157-1164, 2007 https://doi.org/10.1007/s00586-007-0331-0
  10. Cho DC, Sung JK : Is all anterior oblique fracture orientation really a contraindication to anterior screw fixation of type ii and rostral shallow type III odontoid fractures? J Korean Neurosurg Soc 49 : 345-350, 2011 https://doi.org/10.3340/jkns.2011.49.6.345
  11. Cho DC, Sung JK : Analysis of risk factors associated with fusion failure after anterior odontoid screw fixation. Spine (Phila Pa 1976) 37 : 30-34, 2012 https://doi.org/10.1097/BRS.0b013e31820e6418
  12. Debernardi A, D'Aliberti G, Talamonti G, Villa F, Piparo M, Collice M : The craniovertebral junction area and the role of the ligaments and membranes. Neurosurgery 76 Suppl 1 : S22-S32, 2015 https://doi.org/10.1227/01.neu.0000462075.73701.d2
  13. Fountas KN, Kapsalaki EZ, Karampelas I, Feltes CH, Dimopoulos VG, Machinis TG, et al. : Results of long-term follow-up in patients undergoing anterior screw fixation for type II and rostral type III odontoid fractures. Spine (Phila Pa 1976) 30 : 661-669, 2005 https://doi.org/10.1097/01.brs.0000155415.89974.d3
  14. Goldstein SA : The mechanical properties of trabecular bone: dependence on anatomic location and function. J Biomech 20 : 1055-1061, 1987 https://doi.org/10.1016/0021-9290(87)90023-6
  15. Grauer JN, Shafi B, Hilibrand AS, Harrop JS, Kwon BK, Beiner JM, et al. : Proposal of a modified, treatment-oriented classification of odontoid fractures. Spine J 5 : 123-129, 2005 https://doi.org/10.1016/j.spinee.2004.09.014
  16. Grewal R, Assini J, Sauder D, Ferreira L, Johnson J, Faber K : A comparison of two headless compression screws for operative treatment of scaphoid fractures. J Orthop Surg Res 6 : 27, 2011 https://doi.org/10.1186/1749-799X-6-27
  17. Hart A, Harvey EJ, Lefebvre LP, Barthelat F, Rabiei R, Martineau PA : Insertion profiles of 4 headless compression screws. J Hand Surg Am 38 : 1728-1734, 2013 https://doi.org/10.1016/j.jhsa.2013.04.027
  18. Herbert TJ, Fisher WE : Management of the fractured scaphoid using a new bone screw. J Bone Joint Surg Br 66 : 114-123, 1984
  19. Lee SH, Sung JK : Anterior odontoid fixation using a 4.5-mm Herbert screw: the first report of 20 consecutive cases with odontoid fracture. Surg Neurol 66 : 361-366; discussion 366, 2006 https://doi.org/10.1016/j.surneu.2006.04.018
  20. Magee W, Hettwer W, Badra M, Bay B, Hart R : Biomechanical comparison of a fully threaded, variable pitch screw and a partially threaded lag screw for internal fixation of type II dens fractures. Spine (Phila Pa 1976) 32 : E475-E479, 2007 https://doi.org/10.1097/BRS.0b013e31811ec2bb
  21. Muller EJ, Wick M, Russe O, Muhr G : Management of odontoid fractures in the elderly. Eur Spine J 8 : 360-365, 1999 https://doi.org/10.1007/s005860050188
  22. Platzer P, Thalhammer G, Oberleitner G, Schuster R, Vecsei V, Gaebler C : Surgical treatment of dens fractures in elderly patients. J Bone Joint Surg Am 89 : 1716-1722, 2007 https://doi.org/10.2106/JBJS.F.00968
  23. Platzer P, Thalhammer G, Ostermann R, Wieland T, Vecsei V, Gaebler C : Anterior screw fixation of odontoid fractures comparing younger and elderly patients. Spine (Phila Pa 1976) 32 : 1714-1720, 2007 https://doi.org/10.1097/BRS.0b013e3180dc9758
  24. Ramaswamy R, Evans S, Kosashvili Y : Holding power of variable pitch screws in osteoporotic, osteopenic and normal bone: are all screws created equal? Injury 41 : 179-183, 2010 https://doi.org/10.1016/j.injury.2009.08.015
  25. Tun K, Kaptanoglu E, Cemil B, Yorubulut M, Karahan ST, Tekdemir I : Anatomical study of axis for odontoid screw thickness, length, and angle. Eur Spine J 18 : 271-275, 2009 https://doi.org/10.1007/s00586-008-0814-7
  26. Wong ST, Ernest K, Fan G, Zovickian J, Pang D : Isolated unilateral rupture of the alar ligament. J Neurosurg Pediatr 13 : 541-547, 2014 https://doi.org/10.3171/2014.2.PEDS13527

Cited by

  1. Safe Margin beyond Dens Tips to Ventral Dura in Anterior Odontoid Screw Fixation : Analysis of Three-Dimensional Computed Tomography Scan of Odontoid Process vol.61, pp.4, 2017, https://doi.org/10.3340/jkns.2018.0034
  2. Clinical Notes on Herbert Screw Fixation for Fracture of Anterior Mandible vol.12, pp.1, 2017, https://doi.org/10.1055/s-0038-1670673
  3. Evaluation of efficacy of various fixation devices in management of anterior mandibular fractures: A prospective clinical study vol.6, pp.3, 2017, https://doi.org/10.4103/jdrr.jdrr_20_19
  4. Comparison of compression screws used for mandible head fracture treatment-experimental study vol.23, pp.11, 2017, https://doi.org/10.1007/s00784-019-02842-y