DOI QR코드

DOI QR Code

Optimization study on roof break direction of gob-side entry retaining by roof break and filling in thick-layer soft rock layer

  • Yang, Dang-Wei (State Key Laboratory for Geomechancis & Deep Underground Engineering, China University of Mining and Technology) ;
  • Ma, Zhan-Guo (State Key Laboratory for Geomechancis & Deep Underground Engineering, China University of Mining and Technology) ;
  • Qi, Fu-Zhou (State Key Laboratory for Geomechancis & Deep Underground Engineering, China University of Mining and Technology) ;
  • Gong, Peng (State Key Laboratory for Geomechancis & Deep Underground Engineering, China University of Mining and Technology) ;
  • Liu, Dao-Ping (State Key Laboratory for Geomechancis & Deep Underground Engineering, China University of Mining and Technology) ;
  • Zhao, Guo-Zhen (College of Mining Engineering, Taiyuan University of Technology) ;
  • Zhang, Ray Ruichong (Divison of Engineering, Colorado School of Mines)
  • 투고 : 2016.11.18
  • 심사 : 2017.03.03
  • 발행 : 2017.08.25

초록

This paper proposes gob-side entry retaining by roof break and filling in thick-layer soft rock conditions based on the thick-layer soft rock roof strata migration law and the demand for non-pillar gob-side entry retaining projects. The functional expressions of main roof subsidence are derived for three break roof direction conditions: lateral deflection toward the roadway, lateral deflection toward the gob and vertically to the roof. These are derived according to the load-bearing boundary conditions of the main roadway roof stratum. It is concluded that the break roof angle is an important factor influencing the stability of gob-side entry retaining surrounding rock. This paper studies the stress distribution characteristics and plastic damage scope of gob-side entry retaining integrated coal seams, as well as the roof strata migration law and the supporting stability of caving structure filled on the break roof layer at the break roof angles of $-5^{\circ}$, $0^{\circ}$, $5^{\circ}$, $10^{\circ}$ and $15^{\circ}$ are studied. The simulation results of numerical analysis indicate that, the stress concentration and plastic damage scope to the sides of gob-side entry retaining integrated coal at the break roof angle of $5^{\circ}$ are reduced and shearing stress concentration of the caving filling body has been eliminated. The disturbance of coal mining to the roadway roof and loss of carrying capacity are mitigated. Field tests have been carried out on air-return roadway 5203 with the break roof angle of $5^{\circ}$. The monitoring indicates that the break roof filling section and compaction section are located at 0-45 m and 45-75 m behind the working face, respectively. The section from 75-100 m tends to be stable.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Central Universities, Natural Science Foundation of Jiangsu Province

참고문헌

  1. Bai, J.B., Shen, W.L., Guo, G.L., Wang, X.Y. and Yu, Y. (2015), "Roof deformation, failure characteristics, and preventive techniques of gob-side entry driving heading adjacent to the advancing working face", Rock Mech. Rock Eng., 48(6), 2447-2458. https://doi.org/10.1007/s00603-015-0713-2
  2. Chen, M., Yang, S.Q., Zhang, Y.C. and Zang, C.W. (2016), "Analysis of the failure mechanism and support technology for the Dongtan deep coal roadway", Geomech. Eng., Int. J., 11(3), 401-420. https://doi.org/10.12989/gae.2016.11.3.401
  3. Fan, K., Liu, G., Xiao, T. and Zheng, L. (2010), "Study on overlying strata movement and structure features aroused by mountainous shallow buried csal seam mining", Proceedings of International Conference on Mine Hazards Prevention and Control, Qingdao, China, October, pp. 76-82.
  4. Komurlu, E. and Kesimal, A. (2015), "Sulfide-rich mine tailings usage for short-term support purposes: An experimental study on paste backfill barricades", Geomech. Eng., Int. J., 9(2), 195-205. https://doi.org/10.12989/gae.2015.9.2.195
  5. Li, X. and Li, W. (2016), "Numerical investigation on fracturing behaviors of deep-buried opening under dynamic disturbance", Tunn. Undergr. Sp. Tech., 54, 61-72. https://doi.org/10.1016/j.tust.2016.01.028
  6. Li, H., Zhao, B., Guo, G., Zha, J. and Bi, J. (2016a), "The influence of an abandoned goaf on surface subsidence in an adjacent working coal face: A prediction method", Bull. Eng. Geol. Environ., 1-11.
  7. Li, S.C., Wang, J.H., Chen, W.Z., Li, L.P., Zhang, Q.Q. and He, P. (2016b), "Study on mechanism of macro failure and micro fracture of local nearly horizontal stratum in super-large section and deep buried tunnel", Geomech. Eng., Int. J., 11(2), 253-267. https://doi.org/10.12989/gae.2016.11.2.253
  8. Li, X., Ju, M., Yao, Q., Zhou, J. and Chong, Z. (2016c), "Numerical investigation of the effect of the location of critical rock block fracture on crack evolution in a gob-side filling wall", Rock Mech. Rock Eng., 49(3), 1041-1058. https://doi.org/10.1007/s00603-015-0783-1
  9. Ma, T., Wang, L., Suorineni, F.T. and Tang, C. (2016), "Numerical analysis on failure modes and mechanisms of mine pillars under shear loading", Shock Vib., 2016(1), 1-14.
  10. Malkowski, P. (2015), "The impact of the physical model selection and rock mass stratification on the results of numerical calculations of the state of rock mass deformation around the roadways", Tunn. Undergr. Sp. Tech, 50, 365-375. https://doi.org/10.1016/j.tust.2015.08.004
  11. Nguyen, T.L., Hall, S.A., Vacher, P. and Viggiani, G. (2011), "Fracture mechanisms in soft rock: identification and quantification of evolving displacement discontinuities by extended digital image correlation", Tectonophysics, 503(1-2), 117-128. https://doi.org/10.1016/j.tecto.2010.09.024
  12. Nikadat, N. and Marji, M.F. (2016), "Analysis of stress distribution around tunnels by hybridized FSM and DDM considering the influences of joints parameters", Geomech. Eng., Int. J., 11(2), 269-288. https://doi.org/10.12989/gae.2016.11.2.269
  13. Ning, J., Wang, J., Liu, X., Qian, K. and Sun, B. (2014), "Soft-strong supporting mechanism of gob-side entry retaining in deep coal seams threatened by rockburst", Int. J. Min. Sci. Tech., 24(6), 805-810. https://doi.org/10.1016/j.ijmst.2014.10.012
  14. Rebello, N., Sastry, V.R. and Shivashankar, R. (2014), "Study of surface displacements on tunnelling under buildings using 3dec numerical modelling", International Scholarly Research Notices.
  15. Taheri, A. and Tani, K. (2010), "Characterization of a sedimentary soft rock by a small in-situ triaxial test", Geotech. Geol. Eng., 28(3), 241-249. https://doi.org/10.1007/s10706-008-9245-9
  16. Tan, Y.L., Yu, F.H., Ning, J.G. and Zhao, T.B. (2015), "Design and construction of entry retaining wall along a gob side under hard roof stratum", Int. J. Rock Mech. Min. Sci., 77, 115-121.
  17. Wang, G.F., Gong, S.Y., Dou, L., Cai, W. and Mao, Y. (2015), "Evolution of stress concentration and energy release before rock bursts: Two case studies from Xingan Coal Mine, Hegang, China", Rock Mech. Rock Eng, 1-9.
  18. Yang, J.X., Liu, C.Y., Yu, B. and Wu, F.F. (2015a), "The effect of a multi-gob, pier-type roof structure on coal pillar load-bearing capacity and stress distribution", Bull. Eng. Geol. Environ., 74(4), 1-7. https://doi.org/10.1007/s10064-013-0552-x
  19. Yang, Y., Wang, R., Xing, W. and Cheng, L. (2015b), "Analysis of deformation and failure of hard rock mass surrounding underground openings in houziyan hydropower station by 3dec numerical simulation", Apmis Supplementum, 117(127), 55-59.
  20. Yang, X.L., Xu, J.S., Li, Y.X. and Yan, R.M. (2016), "Collapse mechanism of tunnel roof considering joined influences of nonlinearity and non-associated flow rule", Geomech. Eng., Int. J., 10(1), 21-35. https://doi.org/10.12989/gae.2016.10.1.021
  21. Yong, Y., Tu, S., Zhang, X. and Bo, L. (2015), "Dynamic effect and control of key strata break of immediate roof in fully mechanized mining with large mining height", Shock Vib., 2015(4), 1-11.
  22. Yoo, C. (2016), "Effect of spatial characteristics of a weak zone on tunnel deformation behavior", Geomech. Eng., Int. J., 11(1), 41-58. https://doi.org/10.12989/gae.2016.11.1.041
  23. Zhao, C. (2015), "Analytical solutions for crack initiation on floor-strata interface during mining", Geomech. Eng., Int. J., 8(2), 237-255. https://doi.org/10.12989/gae.2015.8.2.237
  24. Zhu, H., Ye, B., Cai, Y. and Zhang, F. (2013), "An elasto-viscoplastic model for soft rock around tunnels considering overconsolidation and structure effects", Comput. Geotech., 50(50), 6-16. https://doi.org/10.1016/j.compgeo.2012.12.004
  25. Zhang, G.F., He, M.C., Yu, X.P. and Huang, Z.G. (2011), "Research on the technique of no-pillar mining with gob-side entry formed by advanced roof caving in the protective seam in Baijiao coal mine", J. Min. Saf. Eng., 28(4), 511-516. [In Chinese]
  26. Zhang, N., Yuan, L., Han, C., Xue, J. and Kan, J. (2012), "Stability and deformation of surrounding rock in pillarless gob-side entry retaining", Safety Sci., 50(4), 593-599. https://doi.org/10.1016/j.ssci.2011.09.010

피인용 문헌

  1. Analysis of Overburden Structure and Pressure-Relief Effect of Hard Roof Blasting and Cutting vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/1354652
  2. Discussion on stability analysis and support technology of surrounding rock of gob-side entry retaining vol.21, pp.4, 2017, https://doi.org/10.21595/jve.2019.20496
  3. Application of High-Strength Lightweight Concrete in Gob-Side Entry Retaining in Inclined Coal Seam vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8167038
  4. A caving self-stabilization bearing structure of advancing cutting roof for gob-side entry retaining with hard roof stratum vol.21, pp.1, 2017, https://doi.org/10.12989/gae.2020.21.1.023