Abstract
This paper presents a high-throughput area-efficient mixed-radix fast Fourier transform (FFT) processor using the efficient scheduling schemes. The proposed FFT processor can support 64, 128, 256, and 512-point FFTs for orthogonal frequency division multiplexing (OFDM) systems, and can achieve a high throughput using mixed-radix algorithm and eight-parallel multipath delay commutator (MDC) architecture. This paper proposes new scheduling schemes to reduce the size of read-only memories (ROMs) and complex constant multipliers without increasing delay elements and computation cycles; thus, reducing the hardware complexity further. The proposed mixed-radix MDC FFT processor is designed and implemented using the Samsung 65nm complementary metal-oxide semiconductor (CMOS) technology. The experimental result shows that the area of the proposed FFT processor is 0.36 mm2. Furthermore, the proposed processor can achieve high throughput rates of up to 2.64 GSample/s at 330 MHz.
본 논문에서는 고속 데이터 전송을 위해 orthogonal frequency division multiplexing (OFDM) 시스템에 적용 가능한 고속 fast Fourier transform (FFT) 프로세서를 제안하였다. 제안하는 FFT 프로제서는 높은 처리율을 만족하기 위해 mixed-radix 알고리즘과 8개의 병렬 경로를 가지는 multipath delay commutator (MDC) 파이프라인 구조를 채택하였다. 하드웨어 복잡도를 줄이기 위해서 새로운 스케줄링 기법들을 적용하여 twiddle factor 연산을 위한 read-only memories (ROM)의 크기를 줄이는 구조와 복소 상수 곱셈기의 수를 줄이는 구조를 제안한다. 제안하는 구조는 지연 소자와 연산 사이클의 증가 없이 하드웨어 복잡도를 줄일 수 있다. 또한, IEEE 802.11 ac/ad와 같은 고속 OFDM 시스템을 위해 64/128/256/512-포인트 FFT 연산이 가능하다. 제안하는 FFT 프로세서는 Verilog-HDL로 모델링하여 Samsung 65nm 공정 라이브러리로 합성하여 0.36mm2의 면적과 330MHz의 동작 주파수에서 2.64 GSample/s를 보이고 있다.