DOI QR코드

DOI QR Code

Prediction of Effective Material Properties for Triaxially Braided Textile Composite

  • Geleta, Tsinuel N. (Department of Civil Systems Engineering, Chungbuk National University) ;
  • Woo, Kyeongsik (School of Civil Engineering, Chungbuk National University) ;
  • Lee, Bongho (Nexcoms Co., LTD)
  • Received : 2016.07.29
  • Accepted : 2017.03.31
  • Published : 2017.06.30

Abstract

In this study, finite element modeling was used to predict the material properties of tri-axially braided textile composite. The model was made based on an experimental test specimen which was also used to compare the final results. The full interlacing of tows was geometrically modelled, from which repeating parts that make up the whole braid called unit cells were identified based on the geometric and mechanical property periodicity. In order to simulate the repeating nature of the unit cell, periodic boundary conditions were applied. For validation of the method, a reference model was analyzed for which a very good agreement was obtained. Material property calculation was done by simulating uniaxial and pure shear tests on the unit cell. The comparison of these results with that of experimental test results showed an excellent agreement. Finally, parametric study on the effect of number of plies, stacking type (symmetric/anti-symmetric) and stacking phase shift was conducted.

Keywords

References

  1. Gibson, R. F., Principles of Composite Material Mechanics, McGraw-Hill, Inc, 1994.
  2. Huang, Z. M., "The Mechanical Properties of Composites Reinforced with Woven and Braided Fabrics", Composite Science and Technology, Vol. 60, 2000, pp. 479- 498. https://doi.org/10.1016/S0266-3538(99)00148-7
  3. Xu, L., Kim, S. J., Ong, C. H. and Ha, S. K., "Prediction of Material Properties of Biaxial and Triaxial Braided Textile Composites", Journal of Composite Materials, Vol. 46, No. 18, 2012, pp. 2255-2270. https://doi.org/10.1177/0021998311431353
  4. Ayranci, C. and Carey, J., "2D Braided Composites: a Review for Stiffness Critical Applications", Composite Structures, Vol. 85, No. 1, 2008, pp. 43-58. https://doi.org/10.1016/j.compstruct.2007.10.004
  5. Aboudi, J., Arnold, S. M. and Bednarcyk, B. A., Micromechanics of Composite Materials: a Generalized Multiscale Analysis Approach, Butterworth-Heinemann, 2012.
  6. Liu, K. C., Chattopadhyay, A., Bednarcyk, B. and Arnold, S. M., "Efficient Multiscale Modeling Framework for Triaxially Braided Composites using Generalized Method of Cells", Journal of Aerospace Engineering, Vol. 5, No. 24(2), 2011, pp. 162-169.
  7. Xiao, X., Kia, H. G. and Gong, X. J., "Strength Prediction of a Triaxially Braided Composite", Composites: Part A, Vol. 42, 2011, pp. 1000-1006. https://doi.org/10.1016/j.compositesa.2011.04.003
  8. Miravete, A., Bielsa, J. M., Chiminelli, A., Cuartero, J., Serrano, S., Tolosana, N. and De Villoria, R. G., "3D Mesomechanical Analysis of Three-Axial Braided Composite Materials", Composites Science and Technology, Vol. 66, 2006, pp. 2954-2964. https://doi.org/10.1016/j.compscitech.2006.02.015
  9. Quek, S. C., Waas, A. M., Shahwan, K. W. and Agaram, V., "Analysis of 2D Triaxial Flat Braided Textile Composites", International Journal of Mechanical Sciences, Vol. 45, 2003, pp. 1077-1096. https://doi.org/10.1016/j.ijmecsci.2003.09.003
  10. Byun, J. H., "The Analytical Characterization of 2-D Braided Textile Composites", Composites Science and Technology, Vol. 60, No. 5, 2000, pp. 705-716. https://doi.org/10.1016/S0266-3538(99)00173-6
  11. Tang, X., Whitcomb, J. D., Kelkar, A. D. and Tate, J. "Progressive Failure Analysis of 2 x 2 Braided Composites Exhibiting Multiscale Heterogeneity", Composites Science and Technology, Vol. 66, 2006, pp. 2580-2590. https://doi.org/10.1016/j.compscitech.2006.01.026
  12. Goyal, D. and Whitcomb, J. D., "Effect of Fiber Properties on Plastic Behavior of 2 x 2 Biaxial Braided Composites", Composites Science and Technology, Vol. 68, 2008, pp. 969-977. https://doi.org/10.1016/j.compscitech.2007.08.002
  13. Goyal, D., Tang, X., Whitcomb, J. D. and Kelkar, A. D., "Effect of Various Parameters on Effective Engineering Properties of 2 x 2 Braided Composites", Mechanics of Advanced Material Structures, Vol. 12, 2005, pp. 113-128. https://doi.org/10.1080/15376490490493998
  14. Yan, Y. and Van Hoa, S., "Energy Model for Prediction of Mechanical Behavior of 2-D Triaxially Braided Composites, Part I: Model Development", Journal of Composite Materials, Vol. 36, No. 8, 2002, pp. 963-981. https://doi.org/10.1177/0021998302036008459
  15. Yan, Y. and Van Hoa, S., "Energy Approach for Prediction of Mechanical Behavior of 2-D Triaxially Braided Composites Part II: Parameter Analysis", Journal of Composite Materials, Vol. 36, No. 10, 2002, pp. 1233-1253. https://doi.org/10.1177/0021998302036010460
  16. AlphaStar, GENOA Technical Manual. Ver. 5. AlphaStar 2013.
  17. Kier, Z. T., Salvi, A., Theis, G., Waas, A. M. and Shahwan, K., "Estimating Mechanical Properties of 2D Triaxially Braided Textile Composites based on Microstructure Properties", Composites Part B: Engineering, Vol. 68, 2015, pp. 288-299. https://doi.org/10.1016/j.compositesb.2014.08.039
  18. ASTM, ASTM D3039 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, American Society of Testing and Materials: West Conshohocken, PA., 2000.

Cited by

  1. Delamination Behavior of L-Shaped Laminated Composites vol.19, pp.2, 2018, https://doi.org/10.1007/s42405-018-0038-y
  2. Failure Analysis of Triaxially Braided Composite Under Tension, Compression and Shear Loading pp.2093-2480, 2019, https://doi.org/10.1007/s42405-019-00152-x