DOI QR코드

DOI QR Code

Simplified sequential construction analysis of buildings with the new proposed method

  • 투고 : 2016.07.07
  • 심사 : 2017.05.18
  • 발행 : 2017.07.10

초록

Correction Factor Method (CFM) is one of the earliest methods for simulating the actual behavior of structure according to construction sequences and practical implementation steps of the construction process which corrects the results of the conventional analysis just by the application of correction factors. The most important advantages of CFM are the simplicity and time-efficiency of the computations in estimating the final modified forces of the beams. However, considerable inaccuracy in evaluating the internal forces of the other structural members obtained by the moment equilibrium equation in the connection joints is the biggest disadvantage of the method. This paper proposes a novel method to eliminate the aforementioned defect of CFM by using the column shortening correction factors of the CFM to modify the axial stiffness of columns. In this method, the effects of construction sequences are considered by performing a single step analysis which is more time-efficient when compared to the staged analysis especially in tall buildings with higher number of elements. In order to validate the proposed method, three structures with different properties are chosen and their behaviors are investigated by application of all four methods of: conventional one-step analysis, sequential construction analysis (SCA), CFM, and currently proposed method.

키워드

참고문헌

  1. ACI318 (1999), Building code requirements for structural concrete, American Concrete Institute; Farmington Hills, MI, USA.
  2. AISC (1989), Specification for Structural Steel Buildings-Allowable Stress Design and Plastic Design, American Institute of Steel Construction; Chicago, IL, USA.
  3. ASCE (2010), Minimum Design of Load of buildings and other structures (ASCE/SEI 7-10), American Society of Civil Engineers; Reston, VA, USA.
  4. Chen, P., Li, H., Sun, S. and Yuan, M. (2006), "A fast construction sequential analysis strategy for tall buildings", Struct. Eng. Mech., 23(6), 675-689. https://doi.org/10.12989/sem.2006.23.6.675
  5. Choi, C.K. and Kim, E.D. (1985), "Multistory frames under sequential gravity loads", J. Struct. Eng., ASCE, 111(11), 2373-2384. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:11(2373)
  6. Choi, C.K., Chung, H.K., Lee, L.G. and Wilson, E.L. (1992), "Simplified building analysis with sequential dead loads-CFM", J. Struct. Eng., ASCE, 118(4), 944-954. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:4(944)
  7. Esmaili, O., Epackachi, S., Mirghaderi, R., Ghalibafian, M. and Taheri, A.A. (2007), "Evaluation of the construction sequence loading effects on seismic performance of high-rise buildings with different structural systems", Proceedings of Ninth Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada, 729-738.
  8. Esmaili, O. (2008), "Considering sequential construction methods of reinforced concrete high-rise buildings with material timedependency effects", M.Sc. Dissertation, University Of Tehran, Iran.
  9. Kim, H.S. (2013), "Effect of horizontal members on column shortening of reinforced concrete building structure", Struct. Des. Tall Spec. Build., 22(5), 440-453. https://doi.org/10.1002/tal.696
  10. Kim, H.S. (2015), "Optimum distribution of additional reinforcement to reduce differential column shortening", Struct. Des. Tall Spec. Build., 24(10), 724-738. https://doi.org/10.1002/tal.1208
  11. Kim, H.S., Jeong, S.H., Shin, S.H. and Park, J.P. (2012a), "Simplified column shortening analysis of a multi-storey reinforced concrete frame", Struct. Des. Tall Spec. Build., 21(6), 405-415. https://doi.org/10.1002/tal.607
  12. Kim, H.S., Jeong, S.H. and Shin, S.H. (2012b), "Column shortening analysis of tall buildings with lumped construction sequences", Struct. Des. Tall Spec. Build., 21(10), 764-776. https://doi.org/10.1002/tal.650
  13. Kwak, H.G. and Kim, J.K. (2006), "Time-dependent analysis of RC frame structures considering construction sequences", Build. Environ., 41(10), 1423-1434. https://doi.org/10.1016/j.buildenv.2005.05.013
  14. Njomo, W.W. and Ozay, G. (2014), "Minimization of differential column shortening and sequential analysis of RC 3D-frames using ANN", Struct. Eng. Mech., 51(6), 989-1003. https://doi.org/10.12989/sem.2014.51.6.989
  15. Park, S.W., Choi, S.W. and Park, H.S. (2013), "Moving average correction method for compensation of differential column shortenings in high-rise buildings", Struct. Des. Tall Spec. Build., 22(9), 718-728. https://doi.org/10.1002/tal.722
  16. Saffarini, H.S. and Wilson, E.L. (1983), "New approaches in the structural analysis of building systems", Research Report No. UCB/SEMM-83/08; Department of Civil Engineering, University of California, Berkeley, USA.
  17. Vafai, A., Ghabdian, M., Estekanchi, H.E. and Desai, C.S. (2009), "Calculation of creep and shrinkage in tall concrete buildings using nonlinear staged construction analysis", Asian J. Civ. Eng., 10(4), 409-426.

피인용 문헌

  1. The effect of constant and seasonal changes of ambient conditions on long‐term behavior of high‐rise concrete structures vol.27, pp.18, 2018, https://doi.org/10.1002/tal.1548
  2. Analytical correction of vertical shortening based on measured data in a RC high-rise building vol.10, pp.6, 2020, https://doi.org/10.12989/acc.2020.10.6.527