References
- H. Tong, Y. Lai, L.P. Wong, Advanced Flip Chip Packaging, Springer, New-York, (2013) 53-84
- J Busby, et al, C4NP Lead Free Solder Bumping and 3D Micro Bumping. IEEE/SEMI Advanced Semiconductor Manufacturing Conference, (2008) 333-339.
- Manfred Jordan, Lead-free Tin Alloys as Substitutes for Tin-lead Alloy Plating, The International Journal of Surface Engineering and Coatings, 75, (1997) 149-153
- H. MORIUCHI, Approach for External Stress Type Whisker Mitigation, J. Sur. Fin. Soc. Japan 59, (2008) 218-222 https://doi.org/10.4139/sfj.59.218
- B. L. Huang and N. C. Lee, Prospects of Lead Free Alternatives for Reflow Soldering, in Proc. of IMAPS'99, Chicago, (1999) 13
- J. S. Ha, C. S. Kang, J. Y. Park and J. P. Jung, Microstructure and Mechanical Properties of Partial Melted Joint Using off Eutectic Lead-free Solders, Mater. Trans, 42, (2001) 814-819 https://doi.org/10.2320/matertrans.42.814
- P.-Y. Chevalier, A Thermodynamic Evaluation of the Ag-Sn system, Thermochim. Acta 136, (1988) 45-54 https://doi.org/10.1016/0040-6031(88)87426-4
- K.S. Kim, S.H. Huh, K. Suganuma, Effects of Intermetallic Compounds on Properties of Sn-Ag-Cu Lead-free Soldered Joints, J. Alloys and Compounds, 352, (2003) 226-236 https://doi.org/10.1016/S0925-8388(02)01166-0
- E.P. Wood and K.L. Nimmo, In Search of New Lead-free Electronic Solders, J. Electronic Mat., 23, (1994) 709-713 https://doi.org/10.1007/BF02651363
- K.N. Subramanian, Lead-Free Electronic Solder, Springer, New-York, (2006) 19-37
- H.Ryu, et al, Principles of Plating and the Plating Equipment, Korean Institute of Surface Engineering, Seoul, (2014) 130-135
-
H.W. Chiang, K. Chang, J.Y. Chen, The Effect of Ag Content on the Formation of
$Ag_3Sn$ Plates in Sn-Ag-Cu Lead-free Solder, J. Electronic Mat. 35, (2006) 2074-2080 https://doi.org/10.1007/s11664-006-0316-5