References
- Abbas, S., Nehdi, M., & Saleem, M. (2016). Ultra-high performance concrete: Mechanical performance, durability, sustainability and implementation challenges. International Journal of Concrete Structures and Materials, 10(3), 271-295. https://doi.org/10.1007/s40069-016-0157-4
- Abdallah, S., Fan, M., & Rees, D. W. A. (2016a). Analysis and modelling of mechanical anchorage of 4D/5D hooked end steel fibres. Materials and Design, 112, 539-552. https://doi.org/10.1016/j.matdes.2016.09.107
- Abdallah, S., Fan, M., & Zhou, X. (2016b). Effect of hooked-end steel fibres geometry on pull-out behaviour of ultra-high performance concrete. World Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10(12), 1530-1535.
- Abdallah, S., Fan, M., Zhou, X., & Geyt, S. (2016c). Anchorage effects of various steel fibre architectures for concrete reinforcement. International Journal of Concrete Structures and Materials, 10, 325-335. https://doi.org/10.1007/s40069-016-0148-5
- Abu-Lebdeh, T., Hamoush, S., Heard, W., & Zornig, B. (2011). Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites. Construction and Building Materials, 25(1), 39-46. https://doi.org/10.1016/j.conbuildmat.2010.06.059
- Adjrad, A., Bouafia, Y., Kachi, M., & Ghazi, F. (2016). Prediction of the rupture of circular sections of reinforced concrete and fiber reinforced concrete. International Journal of Concrete Structures and Materials, 1, 373-381.
- Alberti, M. G., Enfedaque, A., Galvez, J. C., Canovas, M. F., & Osorio, I. R. (2014). Polyolefin fiber-reinforced concrete enhanced with steel-hooked fibers in low proportions. Materials and Design, 60, 57-65. https://doi.org/10.1016/j.matdes.2014.03.050
- Alwan, J. M., Naaman, A. E., & Guerrero, P. (1999). Effect of mechanical clamping on the pull-out response of hooked steel fibers embedded in cementitious matrices. Concrete Science and Engineering, 1(1), 15-25.
- Beglarigale, A., & Yazici, H. (2015). Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar. Construction and Building Materials, 75, 255-265. https://doi.org/10.1016/j.conbuildmat.2014.11.037
- Bentur, A., Wu, S., Banthia, N., Baggott, R., Hansen, W., Katz, A., Leung, C., Li, V., Mobasher, B., & Naaman, A. (1995). Fiber-matrix interfaces. In A. Naaman & Reinhardt H. (Eds.), Chapter 5 van pre-proceedings 2nd international workshop high performance fiber reinforced cement composites (HPF-RCC-95), 11-14 juni (pp. 139-182). Ann Arbor, MI, USA.
- Beygi, M. H. A., Kazemi, M. T., Nikbin, I. M., & Amiri, J. V. (2013). The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete. Materials and Design, 50, 267-276. https://doi.org/10.1016/j.matdes.2013.02.018
- Chan, Y., & Chu, S. (2004). Effect of silica fume on steel fiber bond characteristics in reactive powder concrete. Cement and Concrete Research, 34(7), 1167-1172. https://doi.org/10.1016/j.cemconres.2003.12.023
- Chan, Y., & Li, V. C. (1997). Effects of transition zone densification on fiber/cement paste bond strength improvement. Advanced Cement Based Materials, 5(1), 8-17. https://doi.org/10.1016/S1065-7355(97)90010-9
- Cunha, V. M. (2010). Steel fibre reinforced self-compacting concrete (from micromechanics to composite behavior).
- Deeb, R., Ghanbari, A., & Karihaloo, B. L. (2012). Development of self-compacting high and ultra high performance concretes with and without steel fibres. Cement & Concrete Composites, 34(2), 185-190. https://doi.org/10.1016/j.cemconcomp.2011.11.001
- Dinh, N., Choi, K., & Kim, H. (2016). Mechanical properties and modeling of amorphous metallic fiber-reinforced concrete in compression. International Journal of Concrete Structures and Materials, 10, 221-236. https://doi.org/10.1007/s40069-016-0144-9
- El-Mal, H. A., Sherbini, A., & Sallam, H. (2015). Mode II fracture toughness of hybrid FRCs. International Journal of Concrete Structures and Materials, 9(4), 475-486. https://doi.org/10.1007/s40069-015-0117-4
- EN, B. 12350-8. (2010). Testing fresh concrete. Self-compacting concrete. Slump-flow test.
- Hwang, J., Lee, D. H., Ju, H., Kim, K. S., Kang, T. H., & Pan, Z. (2016). Shear deformation of steel fiber-reinforced prestressed concrete beams. International Journal of Concrete Structures and Materials, 10(3), 53-63. https://doi.org/10.1007/s40069-016-0159-2
- Islam, M. S., & Alam, S. (2013). Principal component and multiple regression analysis for steel fiber reinforced concrete (SFRC) beams. International Journal of Concrete Structures and Materials, 7(4), 303-317. https://doi.org/10.1007/s40069-013-0059-7
- Joo Kim, D. (2009). Strain rate effect on high performance fiber reinforced cementitious composites using slip hardening high strength deformed steel fibers. ProQuest.
- Kang, S., Lee, K., Choi, J., Lee, Y., Felekoglu, B., & Lee, B. Y. (2016). Control of tensile behavior of ultra-high performance concrete through artificial flaws and fiber hybridization. International Journal of Concrete Structures and Materials, 10(3), 33-41. https://doi.org/10.1007/s40069-016-0155-6
- Laranjeira de Oliveira, F. (2010). Design-oriented constitutive model for steel fiber reinforced concrete. Unpublished doctoral dissertation. Universitat Politecnica de Catalunya, Spain.
- Lee, S. F., & Jacobsen, S. (2011). Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar. Materials and Structures, 44(8), 1451-1465. https://doi.org/10.1617/s11527-011-9710-4
- Lee, Y., Kang, S., & Kim, J. (2010). Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix. Construction and Building Materials, 24(10), 2030-2041. https://doi.org/10.1016/j.conbuildmat.2010.03.009
- Li, H., & Liu, G. (2016). Tensile properties of hybrid fiberreinforced reactive powder concrete after exposure to elevated temperatures. International Journal of Concrete Structures and Materials, 10, 29-37. https://doi.org/10.1007/s40069-016-0125-z
- Lim, W., & Hong, S. (2016). Shear tests for ultra-high performance fiber reinforced concrete (UHPFRC) beams with shear reinforcement. International Journal of Concrete Structures and Materials, 10, 177-188. https://doi.org/10.1007/s40069-016-0145-8
- Lu, L., Tadepalli, P., Mo, Y., & Hsu, T. (2016). Simulation of prestressed steel fiber concrete beams subjected to shear. International Journal of Concrete Structures and Materials, 10(3), 297-306. https://doi.org/10.1007/s40069-016-0153-8
- Markovic, I. (2006). High-performance hybrid-fibre concrete: Development and utilisation. Delft: IOS Press.
- Petrone, F., Shan, L., & Kunnath, S. K. (2016). Modeling of RC frame buildings for progressive collapse analysis. International Journal of Concrete Structures and Materials, 10(1), 1-13. https://doi.org/10.1007/s40069-016-0126-y
- Romualdi, J. P., Ramey, M., & Sanday, S. C. (1968). Prevention and control of cracking by use of short random fibers. Special Publication, 20, 179-204.
- Shaikh, F. U. A., Shafaei, Y., & Sarker, P. K. (2016). Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar. Construction and Building Materials, 115, 690-698. https://doi.org/10.1016/j.conbuildmat.2016.04.090
- Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015). A review on ultra high performance concrete: Part I. Raw materials and mixture design. Construction and Building Materials, 101, 741-751. https://doi.org/10.1016/j.conbuildmat.2015.10.088
- Sorensen, C., Berge, E., & Nikolaisen, E. B. (2014). Investigation of fiber distribution in concrete batches discharged from ready-mix truck. International Journal of Concrete Structures and Materials, 8(4), 279-287. https://doi.org/10.1007/s40069-014-0083-2
- Srikar, G., Anand, G., & Prakash, S. S. (2016). A study on residual compression behavior of structural fiber reinforced concrete exposed to moderate temperature using digital image correlation. International Journal of Concrete Structures and Materials, 10, 75-85.
- Tadepalli, P. R., Dhonde, H. B., Mo, Y., & Hsu, T. T. (2015). Shear strength of prestressed steel fiber concrete I-beams. International Journal of Concrete Structures and Materials, 9(3), 267-281. https://doi.org/10.1007/s40069-015-0109-4
- Torregrosa, C. E. E. (2014). Dosage optimization and bolted connections for UHPFRC ties.
- Van Gysel, A. (2000). Studie van het uittrekgedrag van staalvezels ingebed in een cementgebonden matrix met toepassing op staalvezelbeton onderworpen aan buiging. Published.
- Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015). A review on ultra high performance concrete: Part II. Hydration, microstructure and properties. Construction and Building Materials, 96, 368-377. https://doi.org/10.1016/j.conbuildmat.2015.08.095
- Wille, K., El-Tawil, S., & Naaman, A. E. (2014). Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading. Cement & Concrete Composites, 48, 53-66. https://doi.org/10.1016/j.cemconcomp.2013.12.015
- Wille, K., & Naaman, A. (2010). Bond stress-slip behavior of steel fibers embedded in ultra high performance concrete. Proceedings of 18th European conference on fracture and damage of advanced fiber-reinforced cement-based materials (99-111).
- Wille, K., & Naaman, A. E. (2012). Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete. ACI Materials Journal, 109(4), 479-588.
- Wille, K., & Naaman, A. E. (2013). Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight steel fibers. ACI Materials Journal, 110(4), 451-462.
- Wu, Z., Shi, C., He, W., & Wu, L. (2016a). Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Construction and Building Materials, 103, 8-14. https://doi.org/10.1016/j.conbuildmat.2015.11.028
- Wu, Z., Shi, C., & Khayat, K. H. (2016b). Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC). Cement & Concrete Composites, 71, 97-109. https://doi.org/10.1016/j.cemconcomp.2016.05.005
- Yoo, D., & Yoon, Y. (2016). A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete. International Journal of Concrete Structures and Materials, 10, 125-142. https://doi.org/10.1007/s40069-016-0143-x
- Zeng, Q., Li, K., Fen-chong, T., & Dangla, P. (2012). Pore structure characterization of cement pastes blended with high-volume fly-ash. Cement and Concrete Research, 42(1), 194-204. https://doi.org/10.1016/j.cemconres.2011.09.012
Cited by
- Bonding Mechanisms and Strength of Steel Fiber-Reinforced Cementitious Composites: Overview vol.30, pp.3, 2017, https://doi.org/10.1061/(asce)mt.1943-5533.0002154
- Pullout Behavior of Hook End Steel Fibers in Geopolymers vol.31, pp.6, 2017, https://doi.org/10.1061/(asce)mt.1943-5533.0002722
- Effects of Inclination Angle on Pullout Performance of Hooked End Fiber Embedded in UHPC vol.812, pp.None, 2017, https://doi.org/10.4028/www.scientific.net/kem.812.60
- Comparisons Between Pull-Out Behaviour of Various Hooked-End Fibres in Normal-High Strength Concretes vol.13, pp.1, 2017, https://doi.org/10.1186/s40069-019-0337-0
- Effect of the displacement rate and inclination angle in steel fiber pullout tests vol.223, pp.1, 2017, https://doi.org/10.1007/s10704-019-00398-2
- Active Reinforcing Fiber of Cementitious Materials Using Crimped NiTi SMA Fiber for Crack-Bridging and Pullout Resistance vol.13, pp.17, 2017, https://doi.org/10.3390/ma13173845
- Influence of embedment length on the pullout behavior of steel fibers from ultra-high-performance concrete vol.276, pp.None, 2020, https://doi.org/10.1016/j.matlet.2020.128233
- Effect of sand grain size and fibre size on macro-micro interfacial bond behaviour of steel fibres and UHPC mortars vol.73, pp.5, 2017, https://doi.org/10.1680/jmacr.19.00099
- Preparation and performance of the ultra-high performance mortar based on simplex-centroid design method vol.15, pp.None, 2021, https://doi.org/10.1016/j.jmrt.2021.09.107
- Cohesive Fracture and Fiber Pullout Responses in Normal and SCC Fiber-Reinforced Concrete vol.147, pp.12, 2017, https://doi.org/10.1061/(asce)em.1943-7889.0002019
- Study on the Fracture Toughness of Polypropylene-Basalt Fiber-Reinforced Concrete vol.15, pp.1, 2017, https://doi.org/10.1186/s40069-021-00472-x
- Multi-scale analysis on the tensile properties of UHPC considering fiber orientation vol.280, pp.None, 2022, https://doi.org/10.1016/j.compstruct.2021.114835
- Experimental investigation on sing fiber pullout behaviour on steel fiber-matrix of reactive powder concrete (RPC) vol.318, pp.None, 2022, https://doi.org/10.1016/j.conbuildmat.2021.125899