콘크리트학회논문집 (Journal of the Korea Concrete Institute)

  • 제29권3호
  • /
  • Pages.291-298
  • /
  • 2017
  • /
  • 1229-5515(pISSN)
  • /
  • 2234-2842(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

강재 기둥과 하이브리드 강재 보-RC 보 접합부의 반복 휨 거동 평가

Evaluation on Cyclic Flexural Behavior of HSRC (Hybrid H-steel-reinforced Concrete) Beams Connected with Steel Columns

  • 투고 : 2017.01.31
  • 심사 : 2017.04.06
  • 발행 : 2017.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구에서는 강재 기둥과 접합된 하이브리드 H-보-철근 콘크리트 보(HSRC)의 반복 휨 거동을 평가하였다. 실험 변수는 HSRC 보의 연결절점에 배근되는 장부철근의 유무이다. HSRC 보의 소성힌지는 RC 보보다는 기둥 접합부 부근의 H-보에서 형성되도록 유도하였다. 모든 실험체는 하중의 급격한 감소 없이 연성적인 거동을 보였으며, 비록 예상치 못한 H-기둥과 H-보 용접 접합부의 파괴가 발생하였지만, 결과적으로 4.6 이상의 변위연성비를 나타내었다. HSRC 보 시스템에서 RC 보의 균열진전, 휨 강도 및 연성에 대한 장부철근의 영향은 매우 미미하였다. HSRC 보 시스템의 휨 강도는 단면의 완전소성으로 가정하여 산정한 H-보의 최대 휨 내력에 비해 안전 측에서 평가될 수 있었다.

The objective of the present study is to evaluate the cyclic flexural behavior of a hybrid H-steel-reinforced concrete (HSRC) beam at the connection with a H-steel column. The test parameter investigated was the configuration of dowel bars at the joint region of the HSRC beam. The HSRC beam was designed to have plastic hinge at the end of the H-steel beam rather than the RC beam section near the joint. All specimens showed a considerable ductile behavior without a sudden drop of th applied load, resulting in the displacement ductility ratio exceeding 4.6, although an unexpected premature welding failure occurred at the flanges of H-steel beams connecting to H-steel column. The crack propagation in the RC beam region, flexural strength, and ductility of HSRC beam system were insignificantly affected by the configuration of dowel bars. The flexural strength of HSRC beam system governed by the yielding of H-steel beam could be conservatively evaluated from the assumption of a perfect plasticity state along the section.

키워드

참고문헌

  1. Lee, D. S., Kim, S. Y., and Kim, T. K., "Development of Hybrid OCB Beam for the Long-span Building Structures", LHI Journal of Land, Housing, and Urban Affairs, Vol. 6, No. 3, 2015, pp. 129-138. https://doi.org/10.5804/LHIJ.2015.6.3.129
  2. Ahn, H. J., Jung, I. Y., Kim, Y. J., and Hwang, J. S., "Shear Resistance of BESTOBEAM Shear Connector According to the Length", Journal of Korean Society of Steel Construction, Vol. 27, No. 5, 2015, pp. 483-491. https://doi.org/10.7781/kjoss.2015.27.5.483
  3. An, J. H., and Park, C. S., "A Proposal for Estimating Method of Shear Strength on the Beam-column Joints of Composite Structure with Transverse Beam", The Regional Association of Architectural Institute of Korea, Vol. 18, No. 1, 2016, pp. 225-232.
  4. Lee, H. C., Shim, N. J., and Lee, J. I., "Performed Project and Development of ECO-prestressed PC Beam for the Improvement of Connection", Journal of the Computational Structural Engineering Institute of Korea, Vol. 24, No. 2, 2011, pp. 15-22.
  5. Lee, H. G., "Study on Self-Weight Reduction Method for Prestressed Concrete Composite Beam Capable of Connecting with Steel Structure", MS. Thesis, Korea University, Korea, 2012.
  6. Seo, E. A., "Seismic Performance Evaluation of Hybrid System Composed of Steel-reinforced Concrete Beams with Rigid Joint", MS. Thesis, Kyonggi University, Korea, 2015, p. 28.
  7. Kim, Y. J., Bae, J. H., Ahn, T. S., Kim, J. W., and Ryu, H. S., "Cyclic Loading Test on Connection of SRC Column-Composite Beam Consisting of H-Section and U-Section Members", Journal of Korean Society of Steel Construction, Vol. 26, No. 4, 2014, pp. 263-275. https://doi.org/10.7781/kjoss.2014.26.4.263
  8. Yang, K. H., Seo, E. A., and Hong, S. H., "Cyclic Flexural Tests of Hybrid Steel-Precast Concrete Beams with Simple Connection Elements", Engineering Structures, Vol. 118, 2016, pp. 344-356. https://doi.org/10.1016/j.engstruct.2016.03.045
  9. Lee, D. S., Kim, T. K., and Chae, G. B., "The Experimental Study of Full-scale Optimized Composite Beam (OCB) Reinforced with Open Strands", Journal of the Korea Concrete Institute, Vol. 27, No. 5, 2015, pp. 471-480. https://doi.org/10.4334/JKCI.2015.27.5.471
  10. Seo, E. A., Yang, K. H. and Hong, S. H., " Evaluation on Flexural Behavior of Hybrid Beams with Rigid Joint Connecting Steel and Precast Concrete Elements", Journal of the Korea Concrete Institute, Vol. 28, No. 1, 2016, pp. 13-21. https://doi.org/10.4334/JKCI.2016.28.1.013
  11. KS F 2405, Method of Test for Compressive Strength of Concrete, Korean Standards Association, 2010.
  12. KS B 0802, Method of Tensile Test for Metallic Materials, Korean Standards Association, 2003.
  13. P. Paultre, and F. Legeron, "Confinement Reinforcement Design for Reinforced Concrete Columns", Journal of Structural Engineering, Vol. 134, No. 5, 2008, pp. 738-749. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:5(738)
  14. Sheikh, S. A., and Khoury, S. S., "A Performance-based Approach for the Design of Confining Steel in Tied Columns", ACI Structural Journal, Vol. 94, No. 4, 1997, pp. 421-431.