Steel and Composite Structures

  • 제24권2호
  • /
  • Pages.151-176
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

General equations for free vibrations of thick doubly curved sandwich panels with compressible and incompressible core using higher order shear deformation theory

  • Nasihatgozar, M. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University) ;
  • Khalili, S.M.R. (Faculty of Mechanical Engineering, K.N. Toosi University of Technology) ;
  • Fard, K. Malekzadeh (Department of Structural Analysis and Simulation, Space Research Institute)
  • 투고 : 2016.10.25
  • 심사 : 2017.03.19
  • 발행 : 2017.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with general equations of motion for free vibration analysis response of thick three-layer doubly curved sandwich panels (DCSP) under simply supported boundary conditions (BCs) using higher order shear deformation theory. In this model, the face sheets are orthotropic laminated composite that follow the first order shear deformation theory (FSDT) based on Rissners-Mindlin (RM) kinematics field. The core is made of orthotropic material and its in-plane transverse displacements are modeled using the third order of the Taylor's series extension. It provides the potentiality for considering both compressible and incompressible cores. To find these equations and boundary conditions, Hamilton's principle is used. Also, the effect of trapezoidal shape factor for cross-section of curved panel element ($1{\pm}z/R$) is considered. The natural frequency parameters of DCSP are obtained using Galerkin Method. Convergence studies are performed with the appropriate formulas in general form for three-layer sandwich plate, cylindrical and spherical shells (both deep and shallow). The influences of core stiffness, ratio of core to face sheets thickness and radii of curvatures are investigated. Finally, for the first time, an optimum range for the core to face sheet stiffness ratio by considering the existence of in-plane stress which significantly affects the natural frequencies of DCSP are presented.

키워드

참고문헌

  1. Amabili, M. (2008), Nonlinear Vibrations and Stability of Shells and Plates, Cambridge University Press.
  2. Biglari, H. and Jafari, A.A. (2010), "High-order free vibrations of doubly-curved sandwich panels with flexible core based on a refined three-layered theory", Compos. Struct., 92(11), 2685-2694. https://doi.org/10.1016/j.compstruct.2010.03.017
  3. Bhimaraddi, A. (1984), "A higher order theory for free vibration analysis of circular cylindrical shells", Int. J. Solids Struct., 20(7), 623-630. https://doi.org/10.1016/0020-7683(84)90019-2
  4. Cetkovic, M. and Vuksanovic, D. (2009), "Bending, free vibrations and buckling of laminated composite and sandwich plates using a layerwise displacement model", Compos. Struct., 88(2), 219-227. https://doi.org/10.1016/j.compstruct.2008.03.039
  5. Chang, J.D. (1992), Theory of Thick, Laminated Composite Shallow Shells, Ohio State University.
  6. Fares, M.E. and Youssif, Y.G. (2001), "A refined equivalent single-layer model of geometrically non-linear doubly curved layered shells using mixed variational approach", Int. J. Non-Linear Mech., 36(1), 117-124. https://doi.org/10.1016/S0020-7462(99)00091-8
  7. Ferreira, A.J.M. (2005), "Analysis of composite plates using a Layerwise Theory and multiquadrics discretization", Mech. Adv. Mater. Struct., 12(2), 99-112. https://doi.org/10.1080/15376490490493952
  8. Frostig, Y. (1992), "Behavior of delaminated sandwich beam with transversely flexible core - high order theory", Compos. Struct., 20(1), 1-16. https://doi.org/10.1016/0263-8223(92)90007-Y
  9. Frostig, Y. and Thomsen, O.T. (2004), "High-order free vibration of sandwich panels with a flexible core", Int. J. Solids Struct., 41(5-6), 1697-1724. https://doi.org/10.1016/j.ijsolstr.2003.09.051
  10. Frostig, Y., Thomsen, O.T. and Vinson, J.R. (2004), "Bending analysis of unidirectional curved "Soft" sandwich panels with disbonds and slipping layers", J. Sandw. Struct. Mater., 6(2), 167-194. https://doi.org/10.1177/1099636204030477
  11. Garg, A.K., Khare, R.K. and Kant, T. (2006), "Higher-order closed-form solutions for free vibration of laminated composite and sandwich shells", J. Sandw. Struct. Mater., 8(3), 205-235. https://doi.org/10.1177/1099636206062569
  12. Hause, T. and Librescu, L. (2006), "Flexural free vibration of sandwich flat panels with laminated anisotropic face sheets", J. Sound Vib., 297(3-5), 823-841. https://doi.org/10.1016/j.jsv.2006.04.024
  13. Hohe, J., Librescu, L. and Oh, S.Y. (2006), "Dynamic buckling of flat and curved sandwich panels with transversely compressible core", Compos. Struct., 74(1), 10-24. https://doi.org/10.1016/j.compstruct.2005.03.003
  14. Jedari Salami, S. (2016), "Free vibration analysis of sandwich beams with carbon nanotube reinforced face sheets based on extended high-order sandwich panel theory", J. Sandw. Struct. Mater. DOI: https://doi.org/10.1177/1099636216649788
  15. Kant, T. and Swaminathan, K. (2001), "Free vibration of isotropic, orthotropic, and multilayer plates based on higher order refined theories", J. Sound Vib., 241(2), 319-327. https://doi.org/10.1006/jsvi.2000.3232
  16. Kapoor, H. and Kapania, R.K. (2012), "Geometrically nonlinear NURBS isogeometric finite element analysis of laminated composite plates", Compos. Struct., 94(12), 3434-3447. https://doi.org/10.1016/j.compstruct.2012.04.028
  17. Kardomateas, G. (2005), "Wrinkling of wide sandwich panels∕ beams with orthotropic phases by an elasticity approach", J. Appl. Mech., 72(6), 818-825. https://doi.org/10.1115/1.1978919
  18. Khalili, S.M.R., Davar, A. and Malekzadeh Fard, K. (2012), "Free vibration analysis of homogeneous isotropic circular cylindrical shells based on a new three-dimensional refined higher-order theory", Int. J. Mech. Sci., 56(1), 1-25. https://doi.org/10.1016/j.ijmecsci.2011.11.002
  19. Khdeir, A.A. and Reddy, J.N. (1997), "Free and forced vibration of cross-ply laminated composite shallow arches", Int. J. Solids Struct., 34(10), 1217-1234. https://doi.org/10.1016/S0020-7683(96)00095-9
  20. Kheirikhah, M.M., Khalili, S.M.R. and Malekzadeh Fard, K. (2012), "Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory", Eur. J. Mech.-A/Solids, 31(1), 54-66. https://doi.org/10.1016/j.euromechsol.2011.07.003
  21. Leissa, A.W. and Chang, J.D. (1996), "Elastic deformation of thick, laminated composite shells", Compos. Struct., 35(2), 153-170. https://doi.org/10.1016/0263-8223(96)00028-1
  22. Leissa, A.W. and Qatu, M.S. (2011), Vibration of Continuous Systems, McGraw-Hill.
  23. Librescu, L., Khdeir, A.A. and Frederick, D. (1989), "A shear deformable theory of laminated composite shallow shell-type panels and their response analysis I: Free vibration and buckling", Acta Mech., 76(1-2), 1-33. https://doi.org/10.1007/BF01175794
  24. Liew, K. and Lim, C. (1996), "A higher-order theory for vibration of doubly curved shallow shells", J. Appl. Mech., 63(3), 587-593. https://doi.org/10.1115/1.2823338
  25. Malekzadeh Fard, K.M., Livani, M. and Gholami, M. (2014), "Improved high-order bending analysis of double curved sandwich panels subjected to multiple loading conditions", Latin Am. J. Solids Struct., 11(9), 1591-1614. https://doi.org/10.1590/S1679-78252014000900006
  26. Noor, A.K., Burton, W.S. and Bert, C.W. (1996), "Computational models for sandwich panels and shells", Appl. Mech. Rev., 49(3), 155-199. https://doi.org/10.1115/1.3101923
  27. Pagano, N.J. (1970), "Exact solutions for rectangular bidirectional composites and sandwich plates", Mech. Compos. Mater., 86-101.
  28. Qatu, M.S. (2004), Vibration of Laminated Shells and Plates, Elsevier.
  29. Qatu, M.S. and Asadi, E. (2012), "Vibration of doubly curved shallow shells with arbitrary boundaries", Appl. Acoust., 73(1), 21-27. https://doi.org/10.1016/j.apacoust.2011.06.013
  30. Rabinovitch, O. and Frostig, Y. (2001), "High-order analysis of unidirectional sandwich panels with flat and generally curved faces and a soft core", J. Sandw. Struct. Mater., 3(2), 89-116. https://doi.org/10.1106/4WAB-NDGK-LXB2-5AVH
  31. Rahmani, O., Khalili, S.M.R. and Malekzadeh Fard, K. (2010), "Free vibration response of composite sandwich cylindrical shell with flexible core", Compos. Struct., 92(5), 1269-1281. https://doi.org/10.1016/j.compstruct.2009.10.021
  32. Rao, M.K. and Desai, Y.M. (2004), "Analytical solutions for vibrations of laminated and sandwich plates using mixed theory", Compos. Struct., 63(3-4), 361-373. https://doi.org/10.1016/S0263-8223(03)00185-5
  33. Reddy, J. (1984), Energy and Variational Methods, John Wiley, New York, NY, USA.
  34. Reddy, J. (2003), Mechanics of Laminated Composite Plates and Shells, Theory and Application, CRC Press, Boca Raton, FL, USA.
  35. Reissner, E. (1953), "On a variational theorem for finite elastic deformations", J. Math. Phys., 32(2-3), 129-135. https://doi.org/10.1002/sapm1953321129
  36. Reissner, E. and Wan, F.Y.M. (1982), "A note on the linear theory of shallow shear-deformable shells", ZAMP, 33(3), 425-427. https://doi.org/10.1007/BF00944452
  37. Singh, A.V. (1999), "Free vibration analysis of deep doubly curved sandwich panels", Comput. Struct., 73(1-5), 385-394. https://doi.org/10.1016/S0045-7949(98)00267-3
  38. Thai, C.H., Nguyen‐Xuan, H., Nguyen‐Thanh, N., Le, T.H., Nguyen‐Thoi, T. and Rabczuk, T. (2012), "Static, free vibration, and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach", Int. J. Numer. Meth. Eng., 91(6), 571-603. https://doi.org/10.1002/nme.4282
  39. Toorani, M. and Lakis, A. (2000), "General equations of anisotropic plates and shells including transverse shear deformations, rotary inertia and initial curvature effects", J. Sound Vib., 237(4), 561-615. https://doi.org/10.1006/jsvi.2000.3073
  40. Valizadeh, N., Natarajan, S., Gonzalez-Estrada, O.A., Rabczuk, T., Bui, T.Q. and Bordas, S.P. (2013), "S.P.A. NURBS-based finite element analysis of functionally graded plates: Static bending, vibration, buckling and flutter", Compos. Struct., 99, 309-326. https://doi.org/10.1016/j.compstruct.2012.11.008
  41. Vinson, J.R. and Sierakowski, R.L. (2006), The Behavior of Structures Composed of Composite Materials, Springer Science & Business Media.
  42. Viola, E., Tornabene, F. and Fantuzzi, N. (2013), "General higherorder shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels", Compos. Struct., 95, 639-666. https://doi.org/10.1016/j.compstruct.2012.08.005
  43. Wu, Z., Cheung, Y.K., Lo, S.H. and Chen, W. (2008), "Effects of higher-order global-local shear deformations on bending, vibration and buckling of multilayered plates", Compos. Struct., 82(2), 277-289. https://doi.org/10.1016/j.compstruct.2007.01.017

피인용 문헌

  1. Free Vibration of Composite Cylindrical Shells Based on Third-Order Shear Deformation Theory vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/3792164