DOI QR코드

DOI QR Code

Three Phase Current Reconstruction Method of Three Shunt Sensing 3-Phase Inverter by Predictive Current Technique

예측 전류 기법을 적용한 3-션트 전류검출 3상 인버터의 전류 복원 방법

  • Choo, Kyoung-Min (College of Information and Communication Eng. Sungkyunkwan University) ;
  • Hong, Sung-Woo (College of Information and Communication Eng. Sungkyunkwan University) ;
  • Jang, Young-Hee (College of Information and Communication Eng. Sungkyunkwan University) ;
  • Won, Il-Kuen (College of Information and Communication Eng. Sungkyunkwan University) ;
  • Kim, Do-Yun (College of Information and Communication Eng. Sungkyunkwan University) ;
  • Wo, Chung-Yuen (College of Information and Communication Eng. Sungkyunkwan University)
  • Received : 2016.10.01
  • Accepted : 2017.01.11
  • Published : 2017.04.20

Abstract

The measurement of three-phase current is important to control the instantaneous torque of a interior permanent magnet synchronous motor(IPMSM) using a three-phase inverter. Therefore, shunt resistors are used in low-cost motor-driving systems to measure three-phase current instead of additional current sensors that are too expensive for these systems. However, in certain regions of a space vector plane, shunt resistors cannot reconstruct three-phase current in high-speed driving mode. In this paper, predictive current control is used to compensate for the three-phase current in those regions, which results in a reduction of current ripple in a three-shunt sensing inverter(TSSI) and torque ripple in IPMSM.

Keywords

References

  1. F. Blaabjerg, J. K. Pedersen, U. Jaeger, and P. Thoegersen, "Single current sensor technique in the DC link of three-phase PWM-VS inverters: a review and a novel solution," in IEEE Transactions on Industry Applications, Vol. 33, No. 5, pp. 1241-1253, Sep/Oct 1997. https://doi.org/10.1109/28.633802
  2. N. Zhao, B. Yuan, J. Qi, G. Wang, G. Zhang, and D. Xu, "Three-phase current reconstruction applying constant power voltage injection method using three shunt resistors," 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia), Hefei, 2016, pp. 832-836.
  3. F. Blaabjerg and J. K. Pedersen, "An ideal PWM-VSI inverter using only one current sensor in the DC-link," 1994 Fifth International Conference on Power Electronics and Variable-Speed Drives, London, pp. 458-464, 1994.
  4. B. G. Cho, J. I. Ha, and S. K. Sul, "Voltage injection method for boundary expansion of output voltages in three shunt sensing PWM inverters," 8th International Conference on Power Electronics - ECCE Asia, Jeju, pp. 411-415, 2011.
  5. J. Rodriguez et al., "Predictive current control of a voltage source inverter," in IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, pp. 495-503, Feb. 2007. https://doi.org/10.1109/TIE.2006.888802