Safety and Health at Work

  • 제8권1호
  • /
  • Pages.11-18
  • /
  • 2017
  • /
  • 2093-7911(pISSN)
  • /
  • 2093-7997(eISSN)
산업안전보건연구원 (Occupational Safety and Health Research Institute, Korea Occupational Safety and Health Agency)
권호 표지
DOI QR코드

DOI QR Code

Human Body Mechanics of Pushing and Pulling: Analyzing the Factors of Task-related Strain on the Musculoskeletal System

  • Argubi-Wollesen, Andreas (Laboratory of Manufacturing Technology, Helmut Schmidt University, University of the Federal Armed Forces, Institute of Production Engineering) ;
  • Wollesen, Bettina (Department of Human Movement Science and Exercise Science, University of Hamburg, Faculty of Psychology and Human Movement Science, Institute of Human Movement Science) ;
  • Leitner, Martin (Department of Human Movement Science and Exercise Science, University of Hamburg, Faculty of Psychology and Human Movement Science, Institute of Human Movement Science) ;
  • Mattes, Klaus (Department of Human Movement Science and Exercise Science, University of Hamburg, Faculty of Psychology and Human Movement Science, Institute of Human Movement Science)
  • 투고 : 2016.03.20
  • 심사 : 2016.07.14
  • 발행 : 2017.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

키워드

참고문헌

  1. Resnick M, Chaffin D. An ergonomic evaluation of handle height and load in maximal and submaximal cart pushing. Appl Ergon 1995;26:173-8. https://doi.org/10.1016/0003-6870(95)00014-4
  2. Backhaus C, Jubt K, Post M, Ellegast R, Felten C, Hedtmann J. Belastung des Muskel-Skelett-Systems beim Ziehen und Schieben von MullgroBbehaltern. Z Arb Wiss 2012;66:327-46. [in German]. https://doi.org/10.1007/BF03373892
  3. Ciriello V, Snook S, Buck A, Wilkinson P. The effects of task duration on psychophysically-determined maximum acceptable weights and forces. Ergonomics 1990;33:187-200. https://doi.org/10.1080/00140139008927109
  4. Continental AG. Stress Documentation System for workplace analysis; 2013. Hannover, Germany.
  5. Homminga J, Lehr AM, Meijer GJ, Janssen MM, Schlosser TP, Verkerke GJ, Castelein RM. Posteriorly directed shear loads and disc degeneration affect the torsional stiffness of spinal motion segments. Spine (Phila Pa 1976) 2013;38: E1313-9. https://doi.org/10.1097/BRS.0b013e3182a0d5fa
  6. Mital A, Ramakrishan A. A comparison of literature based design recommendations and experimental capability data for complex manual materials handling activity. Int J Ind Ergon 1999;24:73-80. https://doi.org/10.1016/S0169-8141(98)00089-4
  7. Malchaire JB, Cock NA, Robert AR. Prevalence of musculoskeletal disorders at the wrist as a function of angles, forces, repetitiveness, and movement velocities. Scand J Work Environ Health 1996;22:176-81. https://doi.org/10.5271/sjweh.128
  8. Al-Eisawi K, Kerk C, Congleton J, Amendola A, Jenkins OC, Gaines W. The effect of handle height and cart load on the initial hand forces in cart pushing and pulling. Ergonomics 1999;42:1099-113. https://doi.org/10.1080/001401399185162
  9. Xu Xu, Lin J, Boyer J. Shoulder joint loading and posture during medicine cart pushing task. J Occup Environ Hyg 2013;10:446-54. https://doi.org/10.1080/15459624.2013.803417
  10. Schibye S, Sogaard K,MartinsenD,Klausen K. Mechanical load onthe lowback and shouldersduringpushingandpulling oftwo-wheeledwaste containers compared with lifting and carrying of bags and bins. Clin Biomech 2001;16:549-59. https://doi.org/10.1016/S0268-0033(01)00039-0
  11. Lett K, McGill S. Pushing and pulling:personal mechanics influence spine loads. Ergonomics 2006;49:895-908. https://doi.org/10.1080/00140130600665869
  12. Lee K, Chaffin D, Herrin G, Waikar A. Effect of handle height on lower-back loading in cart pushing and pulling. Appl Ergon 1991;22:117-23. https://doi.org/10.1016/0003-6870(91)90310-E
  13. Hoozemans M, Kuijer P, Kingma I, van Dieen J, de Vries W, van der Woude L, Veeger D, van der Beek A, Frings-Dresen M. Mechanical loading of the low back and shoulders during pushing and pulling activities. Ergonomics 2004;47:1-18. https://doi.org/10.1080/00140130310001593577
  14. Boocock M, Haslam R, Lemon P, Thorpe S. Initial force and postural adaptations when pushing and pulling on floor surfaces with good and reduced resistance to slipping. Ergonomics 2006;49:801-21. https://doi.org/10.1080/00140130600562876
  15. Borg G. Psychophysical bases of perceived exertion. Med Sci Sports Exerc 1982;14:377-81.
  16. Garg A, Waters T, Kapellusch J, Karwowski W. Psychophysical basis for maximum pushing and pulling forces:a review and recommendations. Int J Ind Ergon 2014;44:281-91. https://doi.org/10.1016/j.ergon.2012.09.005
  17. Backhaus C, Post M, Jubt K, Ellegast R, Felten C, Hedtmann J. Handkraftmessung beim Bewegen von zwei- und vierradrigen MullgroBbehaltern. In:GfA, editor. Chancen durch Arbeits-, Produkt- und Systemgestaltung; 2013. p. 241-4. [in German].
  18. Van Der Beek A, Kluver B, Frings-Dresen M, Hoozemans M. Gender differences in exerted forces and physiological load during pushing and pulling of wheeled cages by postal workers. Ergonomics 2000;43:269-81. https://doi.org/10.1080/001401300184602
  19. De Looze M, Van Greuningen K, Rebel J, Kingma I, Kuijer P. Force direction and physical load in dynamic pushing and pulling. Ergonomics 2000;43:377-90. https://doi.org/10.1080/001401300184477
  20. Sandfeld J, Rosgaard C, Jensen B. L4-L5 compression and anterior/posterior joint shear forces in cabin attendants during the initial push/pull actions of airplane meal carts. Ergonomics 2014;45:1067-75.
  21. Gite L, Yadav B. Optimum handle height for a push-pull type manuallyoperated dryland weeder. Ergonomics 1990;33:1487-94. https://doi.org/10.1080/00140139008925348
  22. Seo N, Armstrong T. Biomechanical analysis for handle stability during maximum push and pull exertions. Ergonomics 2009;52:1568-75. https://doi.org/10.1080/00140130903287999
  23. Young J, Lin J, Chang C, McGorry R. The natural angle between the hand and handle and the effect of handle orientation on wrist radial/ulnar deviation during maximal push exertions. Ergonomics 2013;56:682-91. https://doi.org/10.1080/00140139.2013.765602
  24. Lin J, McGorry RW, Chang CC. Effects of handle orientation and betweenhandle distance on bi-manual isometric push strength. Appl Ergon 2012;43: 664-70. https://doi.org/10.1016/j.apergo.2011.10.004
  25. Seo N, Armstrong T, Young J. Effects of handle orientation, gloves, handle friction and elbow posture on maximum horizontal pull and push forces. Ergonomics 2010;53:92-101. https://doi.org/10.1080/00140130903389035
  26. Bennett A, Todd A, Desai S. Pushing and pulling technique and load effects:an electromyographical study. Work 2011;38:291-9.
  27. Di Domizio J, Keir P. Forearm posture and grip effects during push and pull tasks. Ergonomics 2010;53:336-43. https://doi.org/10.1080/00140130903389076
  28. Boyer J, Lin J, Chang C. Description and analysis of hand forces in medicine cart pushing tasks. Appl Ergon 2012;44:48-57.
  29. Hoffman S, Reed M, Chaffin D. A study of the difference between nominal and actual hand forces in two-handed sagittal plane whole-body exertions. Ergonomics 2011;54:47-59. https://doi.org/10.1080/00140139.2010.535021
  30. Kao HC, Lin CJ, Lee YH, Chen SH. The effects of direction of exertion, path, and load placement in nursing cart pushing and pulling tasks:an electromyographical study. PLoS One 2015;10:1-17.
  31. Jung MC, Haight JM, Freivalds A. Pushing and pulling carts and two-wheeled hand trucks. Int J Indust Ergon 2005;35:79-89. https://doi.org/10.1016/j.ergon.2004.08.006
  32. Fischer S, Brenneman EC, Wells RP, Dickerson CR. Relationships between psychophysically acceptable and maximum voluntary hand force capacity in the context of underlying biomechanical limitations. Appl Ergon 2012;43:813-20. https://doi.org/10.1016/j.apergo.2011.12.002
  33. Hoozemans M, Allard J, Van Der Beek M, Fringsdresen H, Van Dijk F, Van Der Woude L. Pushing and pulling in relation to musculoskeletal disorders:a review of risk factors. Ergonomics 1998;41:757-81. https://doi.org/10.1080/001401398186621
  34. Stover H, Snook S, Ciriello V. The design of manual handling tasks:revised tables of maximum acceptable weights and forces. Ergonomics 1991;34:1197-213. https://doi.org/10.1080/00140139108964855
  35. Haslam R, Boocock M, Lemon P, Thorpe S. Maximum acceptable loads for pushing and pulling on floor surfaces with good and reduced resistance to slipping. Saf Sci 2002;40:625-37. https://doi.org/10.1016/S0925-7535(01)00063-7

피인용 문헌

  1. Muscular Exposures During Standardized Two-Handed Maximal Pushing and Pulling Tasks vol.5, pp.3, 2017, https://doi.org/10.1080/24725838.2017.1373168
  2. Control of vertical posture while standing on a sliding board and pushing an object vol.236, pp.3, 2017, https://doi.org/10.1007/s00221-017-5166-2
  3. Wearable Monitoring Devices for Biomechanical Risk Assessment at Work: Current Status and Future Challenges—A Systematic Review vol.15, pp.9, 2017, https://doi.org/10.3390/ijerph15092001
  4. Pulling strength, muscular fatigue, and prediction of maximum endurance time for simulated pulling tasks vol.13, pp.11, 2017, https://doi.org/10.1371/journal.pone.0207283
  5. Pushing, pulling and manoeuvring an industrial cart: a psychophysiological study vol.25, pp.2, 2019, https://doi.org/10.1080/10803548.2017.1370231
  6. Design and Development of an Ergonomic Trolley-Lifter for Sheet Metal Handling Task: A Preliminary Study vol.10, pp.3, 2017, https://doi.org/10.1016/j.shaw.2019.06.006
  7. Characteristics of Postural Muscle Activity in Response to A Motor-Motor Task in Elderly vol.9, pp.20, 2019, https://doi.org/10.3390/app9204319
  8. The Sensor-Based Biomechanical Risk Assessment at the Base of the Need for Revising of Standards for Human Ergonomics vol.20, pp.20, 2020, https://doi.org/10.3390/s20205750
  9. Maximum endurance time modeling for push and pull tasks considering gender and handle height vol.31, pp.1, 2021, https://doi.org/10.1002/hfm.20865
  10. Factors Affecting Material-Cart Handling in the Roofing Industry: Evidence for Administrative Controls vol.18, pp.4, 2017, https://doi.org/10.3390/ijerph18041510
  11. Back-Support Exoskeleton Control Strategy for Pulling Activities: Design and Preliminary Evaluation vol.5, pp.3, 2017, https://doi.org/10.3390/designs5030039
  12. Demanda psicossocial e demanda física no trabalho: iniquidades segundo raça/cor vol.26, pp.10, 2017, https://doi.org/10.1590/1413-812320212610.19982020
  13. Isometric push and pull strengths of agricultural workers from Northeast India vol.70, pp.2, 2017, https://doi.org/10.3233/wor-213592
  14. Effects of Pause Design on the Decline in Pulling Effort and the Evaluation of Perceived Effort in Pulling Tasks vol.11, pp.24, 2017, https://doi.org/10.3390/app112412022
  15. A Preliminary Study on Ergonomic Contribution to the Engineering Design Approach of a Wheel Loader Control Lever System vol.14, pp.1, 2017, https://doi.org/10.3390/su14010122