참고문헌
- Brauer, K. O., 1974, Handbook of Pyrotechnics, Chemical Publishing Co., New York.
- Bement, L. J. and Schimmel, M. L., 1995, A Manual for Pyrotechnic Design, Development and Qualification, NASA Technical Memorandum 110172.
- Department of Defense, 2008, Pyroshock, United States Military Standard, MIL-STD-810G Method 517.1.
- Ryschkewitsch, M. G., 2011, Pyroshock Test Criteria, NASA Technical Standards, NASA-STD-7003A.
- Youn, S.-H., Jeong, H.-K. and Han, J.-H., 2011, Comparisons of Isolation Performances for the SMA Mesh Washer Isolator with the Variation of Pre-compressed Displacement, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 2, pp. 162-168. https://doi.org/10.5050/KSNVE.2011.21.2.162
- Jeong, H.-K., Lee, J., Han, J.-H. and Wereley, N. M., 2016, Design of Frequency-tunable Mesh Washer Isolators Using Shape Memory Alloy Actuators, Journal of Intelligent Material Systems and Structures, Vol. 27, No. 9, pp. 1265-1280. https://doi.org/10.1177/1045389X15588629
- Yoon, S.-H., Jang, Y.-S. and Han, J.-H., 2010, Compressed Mesh Washer Isolators Using the Pseudoelasticity of SMA for Pyroshock Attenuation, Journal of Intelligent Material Systems and Structures, Vol. 21, No. 4, pp. 407-421. https://doi.org/10.1177/1045389X09355665
- Lee, J., Han, J.-H., Lee, Y. and Lee, H., 2015, A Parametric Study of Ridge-cut Explosive Bolts using Hydrocodes, International Journal of Aeronautical and Space Sciences, Vol. 16, No. 1, pp. 50-63. https://doi.org/10.5139/IJASS.2015.16.1.50
- Hwang, D.-H., Lee, J., Han, J.-H., Lee, Y. and Kim, D., 2016, Numerical Analysis and Simplified Mathematical Modeling of Separation Mechanism for the Ball-type Separation Bolt, Journal of the Korean Society of Propulsion Engineers, Vol. 20, No. 3, pp. 63-70. https://doi.org/10.6108/KSPE.2016.20.3.063
- Lee, J., Hwang, D.-H., Jang, J.-K., Kim, D.-J., Lee, Y., Lee, J.-R. and Han, J.-H., 2016, Pyroshock Prediction of Ridge-cut Explosive Bolts Using Hydrocodes, Shock and Vibration, Vol. 2016, Article ID 1218767.
- Benedetti, M., Garofalo, G., Zumpano, M. and Barboni, R., 2007, On the Damping Effect Due to Bolted Junctions in Space Structures Subjected to Pyro-shock, Acta Astronautica, Vol. 60, No. 12, pp. 947-956. https://doi.org/10.1016/j.actaastro.2006.11.011
- Lee, D.-O., Han, J.-H., Jang, H.-W., Woo, S.-H. and Kim, K.-W., 2010, Shock Response Prediction of a Low Altitude Earth Observation Satellite During Launch Vehicle Separation, International Journal of Aeronautical and Space Sciences, Vol. 11, No. 1, pp. 49-57. https://doi.org/10.5139/IJASS.2010.11.1.049
- Lee, J.-R., Chia, C.-C. and Kong, C.-W., 2012, Review of Pyroshock Wave Measurement and Simulation for Space Systems, Measurement, Vol. 45, No. 4, pp. 631-642. https://doi.org/10.1016/j.measurement.2011.12.011
- Irvine, T., 2012, An Introduction to the Shock Response Spectrum, Revision S.
- PCB Piezotronics Vibration Division, 2004, PCB Product Catalog, VIB-300E-1104.
- Lee, J. Y., 2015, Model Updating in Small Structural Dynamics Model by Elimination of Mass Loading Effect of Accelerometer, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 25, No. 1, pp. 40-47. https://doi.org/10.5050/KSNVE.2015.25.1.040