참고문헌
-
Sung, J. W., Kim, K. H. and Kang, M. C., "Effects of Graphene Nanoplatelet Contents on Mater ial and Machining Properties of GNP-Dispersed
$ Al_2O_3$ Ceramics for Micro-Electric Discharge Machining," IJPEM-GT, Vol. 3, pp.247-252, 2016. - Blake, P., Bifano, T. and Dow, T., "Precision Machining of Ceramic Materials," J. of the American Cermaic Society, Vol. 67, 1988.
- Henry, J. and Hill, R. G., "The Influence of Lithia Content on the Properties of Fluorphlogopite Glass-ceramics," J. of Noncrystalline Solids, Vol. 319, pp. 13-30, 2003. https://doi.org/10.1016/S0022-3093(02)01959-2
-
Ceja, C. and Ruiz, L. J., "Spark Plasma Sintering of
${\alpha}-Si_3N_4$ Ceramics with$Al_2O_3$ and$Y_2O_3$ as Additives and Its Morpholgy Transformation," J. of Alloy compounds, Vol. 501, pp. 345-351, 2010. https://doi.org/10.1016/j.jallcom.2010.04.102 -
Shuba, R. and Chen, I. W., "Machinable
${\alpha}$ -SiAlOBN/BN Composites," J. of the American Cermaic Society, Vol. 89, pp. 2147-2153, 2006. - Zhou, M., "Effects of the Electric Current on Conductive Si3N4/TiN Composites in Spark Plasma Sintering," J. of Alloys and Compounds Vol. 547, pp. 51-58, 2013. https://doi.org/10.1016/j.jallcom.2012.08.091
-
Go, G. H., "Orientation and micro hole drilling characteristics of
$Si_3N_4/hBN$ ceramic composites with hBN contents and sintering pressure," A Thesis for a Master, Pusan National University, Republic of Korea, 2015. - Kim, J. D. and Yoon, M. C., "An analysis of Cutting Force according to Specific Force Coefficients," J. of KSMPE, Vol. 13, pp. 108-116, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.108
- Byun, J. Y., Park, N. R., Chung, S. W., Kwon, S. H., Park, J .M. and Kim, J. S., "Drilling Characteristics of PVC Materials," J. of KSMPE, Vol. 14 pp. 70-77, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.070
- Durao, L. M. P. and Andrade, O. N. G., "Drilling Damage in Composite Material," J. of Materia ls, Vol. 7, pp3802-3819, 2014.
- Kang, M. C., Je, S. K., Kim, K. H., Shin, B. S. Kwon, D. H. and Kim, J. S., "Cutting performance of CrN-based coatings tool deposited by hybrid coating method for micro drilling applications,"Surface & Coatings Technology, Vol. 202, pp. 5629-5632, 2008. https://doi.org/10.1016/j.surfcoat.2008.06.130
피인용 문헌
- 다이아몬드전착 밴드쏘우장비를 이용한 고치밀도 알루미나소결체의 다이싱가공 성능평가 vol.16, pp.6, 2017, https://doi.org/10.14775/ksmpe.2017.16.6.001
- 3D Printer로 제작된 인공뼈 구조에 대한 기계적 특성에 관한 연구 vol.19, pp.11, 2017, https://doi.org/10.14775/ksmpe.2020.19.11.035