Earthquakes and Structures

  • 제12권3호
  • /
  • Pages.333-347
  • /
  • 2017
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of masonry infill walls with openings on nonlinear response of reinforced concrete frames

  • Ozturkoglu, Onur (Deparment of Civil Engineering, Dokuz Eylul University) ;
  • Ucar, Taner (Department of Architecture, Dokuz Eylul University) ;
  • Yesilce, Yusuf (Deparment of Civil Engineering, Dokuz Eylul University)
  • 투고 : 2016.11.09
  • 심사 : 2017.03.09
  • 발행 : 2017.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Masonry infill walls are unavoidable parts of any building to create a separation between internal space and external environment. In general, there are some prevalent openings in the infill wall due to functional needs, architectural considerations or aesthetic concerns. In current design practice, the strength and stiffness contribution of infill walls is not considered. However, the presence of infill walls may decisively influence the seismic response of structures subjected to earthquake loads and cause a different behavior from that predicted for a bare frame. Furthermore, partial openings in the masonry infill wall are significant parameter affecting the seismic behavior of infilled frames thereby decreasing the lateral stiffness and strength. The possible effects of openings in the infill wall on seismic behavior of RC frames is analytically studied by means of pushover analysis of several bare, partially and fully infilled frames having different bay and story numbers. The stiffness loss due to partial opening is introduced by the stiffness reduction factors which are developed from finite element analysis of frames considering frame-infill interaction. Pushover curves of frames are plotted and the maximum base shear forces, the yield displacement, the yield base shear force coefficient, the displacement demand, interstory drift ratios and the distribution of story shear forces are determined. The comparison of parameters both in terms of seismic demand and capacity indicates that partial openings decisively influences the nonlinear behavior of RC frames and cause a different behavior from that predicted for a bare frame or fully infilled frame.

키워드

참고문헌

  1. Akpinar, U. and Binici, B. (2013), "The effect of infill wall collapse on the deformation estimations of reinforced concrete frames", J. Civ. Eng. Sci., 2(3), 171-177.
  2. Allouzi, R., Irfanoglu, A. and Haikal, G. (2014), "Non-linear finite element modeling of RC frame-masonry wall interaction under cyclic loadings", Tenth U.S. National Conference on Earthquake Engineering, Anchorage, Alaska, July.
  3. Andrei, Z. (2014), "Influence of openings on the behavior of masonry infill frames", 2nd International Conference on Advances in Engineering Sciences and Applied Mathematics, Istanbul, May.
  4. Asteris, P.G. (2003), "Lateral stiffness of brick masonry infilled plane frames", J. Struct. Eng., 129(8), 1071-1079. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1071)
  5. Asteris, P.G., Chrysostomou, C.Z., Giannopoulos, I.P. and Smyrou, E. (2011a), "Masonry infilled reinforced concrete frames with openings", III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May.
  6. Asteris, P.G., Kakaletsis, D.J., Chrysostomou, C.Z. and Smyrou, E.E. (2011b), "Failure modes of in-filled frames", Electronic J. Struct. Eng., 11(1), 11-20.
  7. Asteris, P.G., Cotsovos, D.M., Chrysostomou, C.Z., Mohebkhah, A. and Al-Chaar, G.K. (2013), "Mathematical micromodeling of infilled frames: State of the art", Eng. Struct., 56, 1905-1921. https://doi.org/10.1016/j.engstruct.2013.08.010
  8. Asteris, P.G., Repapis, C.C., Tsaris, A.K., Trapani, F.D. and Cavaleri, L. (2015), "Parameters affecting the fundamental period of infilled RC frame structures", Earthq. Struct., 9(5), 999-1028. https://doi.org/10.12989/eas.2015.9.5.999
  9. Bolhassani, M., Hamid, A.A., Johnson, C. and Schultz, A.E. (2016), "Shear strength expression for partially grouted masonry walls", Eng. Struct., 127, 475-494. https://doi.org/10.1016/j.engstruct.2016.09.001
  10. Caprili, S., Nardini, L. and Salvatore, W. (2012), "Evaluation of seismic vulnerability of a complex RC existing building by linear and nonlinear modeling approaches", Bull. Earthq. Eng., 10(3), 913-954. https://doi.org/10.1007/s10518-011-9329-4
  11. Cavaleri, L. and Trapani, F.D. (2014), "Cyclic response of masonry infilled RC frames: Experimental results and simplified modeling", Soil Dyn. Earthq. Eng., 65, 224-242. https://doi.org/10.1016/j.soildyn.2014.06.016
  12. CEN (2004), Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization, Brussels, Belgium.
  13. Dolsek, M. and Fajfar, P. (2008), "The effect of masonry infills on the seismic response of a four-storey reinforced concrete framea deterministic assessment", Eng. Struct., 30(7), 1991-2001. https://doi.org/10.1016/j.engstruct.2008.01.001
  14. Dorji, J. and Thambiratnam, D.P. (2009), "Modeling and analysis of infilled frame structures under seismic loads", Open Constr. Build. Technol. J., 3, 119-126. https://doi.org/10.2174/1874836800903010119
  15. Emami, S.M.M. and Mohammadi, M. (2016), "Influence of vertical load on in-plane behavior of masonry infilled steel frames", Earthq. Struct., 11(4), 609-627. https://doi.org/10.12989/eas.2016.11.4.609
  16. Ercolino, M., Ricci, P., Magliulo, G. and Verderame, G.M. (2016), "Influence of infill panels on an irregular RC building designed according to seismic code", Earthq. Struct., 10(2), 261-291. https://doi.org/10.12989/eas.2016.10.2.261
  17. Eurocode 6 (1996), Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures, European Committee for Standardization, Brussels, Belgium.
  18. FEMA-306 (1998), Evaluation of earthquake damaged concrete and masonry wall buildings, Federal Emergency Management Agency, Washington, D.C.
  19. FEMA-356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency; Washington, D.C.
  20. FEMA P440A (2009), Effects of strength and stiffness degradation on seismic response, Federal Emergency Management Agency, Washington, D.C.
  21. Fenerci, A., Binici, B., Ezzatfar, P., Canbay, E. and Ozcebe, G. (2016), "The effect of infill walls on the seismic behavior of boundary columns in RC frames", Earthq. Struct., 10(3), 539-562. https://doi.org/10.12989/eas.2016.10.3.539
  22. Fiore, A., Porco, F., Raffaele, D. and Uva, G. (2012), "About the influence of the infill panels over the collapse mechanisms actived under pushover analyses: Two case studies", Soil Dyn. Earthq. Eng., 39, 11-22. https://doi.org/10.1016/j.soildyn.2012.02.004
  23. Haris, I. and Hortobagyi, Z. (2015), "Comparison of experimental and analytical results on masonry infilled RC frames for cyclic lateral load", Periodica Polytechnica, 59(2), 193-208. https://doi.org/10.3311/PPci.8099
  24. Kakaletsis, D.J. and Karayannis, C.G. (2008), "Influence of masonry strength and openings on infilled R/C frames under cycling loading", J. Earthq. Eng., 12(2), 197-221. https://doi.org/10.1080/13632460701299138
  25. Kakaletsis, D.J. and Karayannis, C.G. (2009), "Experimental investigation of infilled reinforced concrete frames with opening", ACI Struct. J., 106(2), 132-141.
  26. Kaushik, H.B., Rai, D.C. and Jain, S.K. (2007), "Stress-strain characteristics of clay brick masonry under uniaxial compression", J. Mater. Civ. Eng., 19(9), 728-739. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(728)
  27. Kaushik, H.B., Rai, D.C. and Jain, S.K. (2008), "A rational approach to analytical modeling of masonry infills in reinforced concrete frames buildings", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
  28. Kose, M.M. (2009), "Parameters affecting the fundamental period of RC buildings with infill walls", Eng. Struct., 31(1), 93-102. https://doi.org/10.1016/j.engstruct.2008.07.017
  29. Koutromanos, I. and Shing, P.B. (2014), "Numerical modeling of masonry infilled reinforced concrete frame buildings", Encyclopedia Earthq. Eng., 1-15.
  30. Koutromanos, I., Stavridis, A., Shing, P.B. and Willam, K. (2011), "Numerical modeling of masonry-infilled RC frames subjected to seismic loads", Comput. Struct., 89(11-12), 1026-1037. https://doi.org/10.1016/j.compstruc.2011.01.006
  31. Kuang, J.S. and Zhang, H. (2014), "Shake table tests of infilled RC frames with different column-to-infill connections", Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August.
  32. Lima, C., Stefano, G.D. and Martinelli, E. (2014), "Seismic response of masonry infilled RC frames: practice-oriented models and open issues", Earthq. Struct., 6(4), 409-436. https://doi.org/10.12989/eas.2014.6.4.409
  33. Liu, L., Wu, Z. and Sun, H. (2014), "The influence of infill walls on RC frames under seismic excitation", Arch. Eng., 2(4), 68-72.
  34. Madan, A., Reinborn, A.M., Mander, J.B. and Valles, R.E. (1977), "Modeling of masonry infill panels for structural analysis", J. Struct. Eng., 123(10), 1295-1307. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1295)
  35. Martinelli, E., Lima, C. and De Stefano, G. (2015), "A simplified procedure for nonlinear static analysis of masonry infilled RC frames", Eng. Struct., 101, 591-608. https://doi.org/10.1016/j.engstruct.2015.07.023
  36. Mehrabi, A.B., Shing, P.B., Schuller, M.P. and Noland, J.L. (1996), "Experimental evaluation of masonry infilled RC frames", J. Struct. Eng., 122(3), 228-237. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(228)
  37. Moaveni, B., Stavridis, A., Lombaert, G., Conte, J.P. and Shing, P.B. (2013), "Finite-element model updating for assessment of progressive damage in a 3-story infilled RC frame", J. Struct. Eng., 139(10), 1665-1674. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000586
  38. Mohammadi, M. and Nikfar, F. (2013), "Strength and stiffness of masonry-infilled frames with central openings based on experimental results", J. Struct. Eng., 139(6), 974-984. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000717
  39. Mohebkhah, A., Tasnimi, A.A. and Moghadam, H.A. (2008), "Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method", J. Constr. Steel Res., 64(12), 1463-1472. https://doi.org/10.1016/j.jcsr.2008.01.016
  40. Mondal, G. and Jain, S.K. (2008), "Lateral stiffness of masonry infilled reinforced concrete (RC) frames with central opening", Earthq. Spectra, 24(3), 701-723. https://doi.org/10.1193/1.2942376
  41. Mosalam, K.M., White, R.N. and Gergely, P. (1997), "Static response of infilled frames using quasi-static experimentation", J. Struct. Eng., 123(11), 1462-1469. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1462)
  42. Polyakov, S.V. (1950), "Investigation of the strength and of the deformational characteristics of masonry filler walls and facing on framed structures", Construction Industry Institute, 3.
  43. Porco, F., Fiore, A., Uva, G. and Raffaele, D. (2015), "The influence of infilled panels in retrofitting interventions of existing reinforced concrete buildings: a case study", Struct. Infrastruct. Eng., 11(2), 162-175. https://doi.org/10.1080/15732479.2013.862726
  44. Pradhan, P.M., Pradhan, P.L. and Maskey, R.K. (2012), "A review on partial infilled frames under lateral loads", Kathmandu University J. Sci., Eng. Technol., 8(1), 142-152.
  45. Pujol, S., Climent, A.B., Rodriguez, M.E. and Pardo, L.P.S. (2008), "Masonry infill walls: an effective alternative for seismic strengthening of low-rise reinforced concrete building structures", The 14th World Conference on Earthquake Engineering, Beijing, China, October.
  46. Rathod, P. and Dyavanal, S.S. (2014), "Seismic evaluation of multistorey RC building with openings in unreinforced masonry infill walls with user defined hinges", Proceedings of 08th IRF International Conference, Bengaluru, India, July.
  47. Ricci, P., Verderame, G.M. and Manfredi, G. (2011), "Analytical investigation of elastic period of infilled RC MRF buildings", Eng. Struct., 33(2), 308-319. https://doi.org/10.1016/j.engstruct.2010.10.009
  48. Ruiz-Garcia, J. and Miranda, E. (2005), "Performance-based assessment of existing structures accounting for residual displacements", Report No. 153, John A. Blume Earthquake Engineering Center, Department of Civil and Environmental Engineering, Stanford University, Stanford, California.
  49. SAP2000 (2016), Integrated Structural Analysis and Design Software, Ver.16.0.0, Computer and Structures Inc., USA.
  50. Stavridis, A. and Shing, P.B. (2010), "Finite-element modeling of nonlinear behavior of masonry-infilled RC frames", J. Struct. Eng., 136(3), 285-296. https://doi.org/10.1061/(ASCE)ST.1943-541X.116
  51. Tasnimi, A.A. and Mohebkhah, A. (2011), "Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches", Eng. Struct., 33(3), 968-980. https://doi.org/10.1016/j.engstruct.2010.12.018
  52. Tsai, M. and Huang, T. (2011), "Numerical investigation on the progressive collapse resistance of and RC building with brick infills under column loss", World Academy Sci. Eng. Technol., 7(1), 27-34.
  53. TSDC (2007), Turkish seismic design code, Ministry of Public Works and Settlement; Ankara, Turkey.
  54. TS500 (2000), Requirements for design and construction of reinforced concrete structures, Turkish Standards Institution; Ankara, Turkey.
  55. UBC (1997), Uniform building code, International Conference of Building Officials; Whittier, California, USA.
  56. Uva, G., Porco, F. and Fiore, A. (2012), "Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case study", Eng. Struct., 34, 514-526. https://doi.org/10.1016/j.engstruct.2011.08.043
  57. Valente, M. (2012), "Seismic performance assessment of a masonry infilled ductile RC structure", Int. J. Eng. Technol., 4(6), 701-704. https://doi.org/10.7763/IJET.2012.V4.466
  58. Yuen, Y.P. and Kuang, J.S. (2015), "Nonlinear seismic responses and lateral force transfer mechanisms of RC frames with different infill configurations", Eng. Struct., 91, 125-140. https://doi.org/10.1016/j.engstruct.2015.02.031

피인용 문헌

  1. A simplified evaluation method of skeleton curve for RC frame with URM infill vol.13, pp.3, 2017, https://doi.org/10.12989/eas.2017.13.3.309
  2. Dynamic stiffness formulations for harmonic response of infilled frames vol.68, pp.2, 2017, https://doi.org/10.12989/sem.2018.68.2.183
  3. Effects of Central Opening in Masonry Infill on Lateral Behavior of Intermediate RC Frames vol.8, pp.1, 2017, https://doi.org/10.1520/acem20180040
  4. Experimental Study on the Seismic Performance of a Partition Damped Wall-Filled Frame Structure vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/9108784
  5. Analytical Validation of Macromodeling Techniques of Infilled RC Frames vol.43, pp.suppl1, 2017, https://doi.org/10.1007/s40996-018-0183-3
  6. Structural models for analysis of reinforced concrete frame buildings with masonry infills vol.12, pp.5, 2019, https://doi.org/10.1590/s1983-41952019000500006
  7. Lateral loading test for partially confined and unconfined masonry panels vol.18, pp.3, 2017, https://doi.org/10.12989/eas.2020.18.3.379
  8. Seismic performance of structures composed of T-shaped and L-shaped recycled concrete columns and lightweight infill walls vol.19, pp.4, 2017, https://doi.org/10.1080/13467581.2020.1744444
  9. Verifying ASCE 41 the evaluation model via field tests of masonry infilled RC frames with openings vol.19, pp.3, 2017, https://doi.org/10.12989/eas.2020.19.3.157
  10. Sociotechnical Evaluation of the Soft Story Problem in Reinforced Concrete Frame Buildings in Nepal vol.35, pp.4, 2021, https://doi.org/10.1061/(asce)cf.1943-5509.0001582
  11. Parametric nonlinear static analysis of a RC structure with TLCW exposed to bidirectional earthquake load by using different modelling methodologies vol.44, pp.None, 2017, https://doi.org/10.1016/j.jobe.2021.103395