초록
본 연구에서는 Alumina 골재를 사용한 fly ash-blast furnace slag계 Geopolymer의 내열성 건축자재로서의 사용 가능성을 검토하기 위하여 고온조건에서의 열적 특성에 대하여 조사하였다. 모든 배합조건에서 Geopolymer 경화체의 표면 크랙은 $800^{\circ}C$까지는 관찰되지 않았으며, 이것은 열처리 전후 강도의 변화가 작은 것과 일치한다. 또한, $800^{\circ}C$까지 고로슬래그의 혼합비율이 60 wt%일 때 잔존압축강도가 가장 우수한 것으로 나타났다. Geopolymer 경화체의 주요 수화 생성물은 $20{\sim}35^{\circ}$(2theta) 범위의 비정질 halo 패턴과 원재료의 mullite($3Al_2O_3{\cdot}2SiO_2$)와 quartz($SiO_2$)가 확인되었다. 비정질 halo 패턴은 Geopolymer 축중합 반응에 의해서 생성된 aluminosilicate gel이며, $800^{\circ}C$까지는 aluminosilicate gel의 halo 패턴이 유지되고 있음을 알 수 있다. $1,000^{\circ}C$에서 aluminosilicate gel의 패턴은 사라지며 열처리온도의 증가와 함께 gehlenite, calcium silicate, calcium aluminum oxide, microcline와 같은 결정상이 관찰되었다.
In this study, the higher temperature thermal property of the fly ash-blast furnace slag system Geopolymer including alumina aggregate was investigated whether that Geopolymer will be or not useful as thermal-resistant construction materials. Under every mixing conditions, the crack on the surface of hardened body was not observed up to $800^{\circ}C$ and it corresponded with fact that level of changes was not significant before and after heating process. Residual compressive strength is most high when mixing Blast-Furnace Slag ratio is 60 wt% until temperature reaches $800^{\circ}C$. The major hydrates of hardened body of Geopolymer; amorphous halo pattern between $20{\sim}35^{\circ}$ (2theta) and mullite ($3Al_2O_3{\cdot}2SiO_2$) and quartz ($SiO_2$) was found during the experiment. Amorphous halo pattern was a aluminosilicate gel generated by geopolymeric polycondensation and it was found that the halo pattern of aluminosilicate gel was preserved up to $800^{\circ}C$. The patterns of aluminosilicate gel disappeared from $1,000^{\circ}C$ and crystal phases like gehlenite, calcium silicate, calcium aluminum oxide, microcline was observed with the increase of exposure temperature.