DOI QR코드

DOI QR Code

Accelerated life testing of concrete based on stochastic approach and assessment

  • Zhu, Binrong (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Qiao, Hongxia (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Feng, Qiong (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology) ;
  • Lu, Chenggong (Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology)
  • 투고 : 2016.09.20
  • 심사 : 2016.11.02
  • 발행 : 2017.01.25

초록

This study aimed to design the accelerated life testing (ALT) of concrete, which stimulating the special natural environment maximumly. Its evaluation indexes, such as dynamic elastic modulus, mass and ultrasonic velocity were measured, and the variation of relative mass and relative dynamic elastic modulus of concrete were studied. Meanwhile, the microanalysis method was used. Moreover, an exploratory application of the stochastic approach, the Weibull distribution and the lognormal distribution, were made to assess the durability of concrete structures. The results show that the ALT for simulating natural environment is more close to the service process of concrete structure under actual conditions; The relative dynamic elastic modulus can be used as the dominant durability evaluation parameters, because it is more sensitive to the environmental factors compared with the relative quality evaluation parameters; In the course of the concrete deterioration, the destruction of the salt freezing cycle is the dominant factor, supplemented by other factors; Both of those two stochastic approaches can be used to evaluate the reliability of concrete specimens under the condition of ALT; By comparison, The lognormal distribution method is better to describe the reliability process.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Aye, T. and Oguchi, C.T. (2011), "Resistance of plain and blended cement mortars exposed to severe sulfate attacks", Constr. Build. Mater., 25(6), 2988-2996. https://doi.org/10.1016/j.conbuildmat.2010.11.106
  2. Chen, S.B., Liu, R.G., Li, C.Q., Yan, Y.D. and Chen, Y. (2015), "Similar time relationship of chloride ion transmission in prestressed concrete in salt-fog environment", B. Chin. Ceram. Soc., 34(11), 3338-3344.
  3. Chen, Y.J., Gao, J.M., Tang, L.P. and Li, X.H. (2016), "Resistance of concrete against combined attack of chloride and sulfate under drying-wetting cycles", Constr. Build. Mater., 106(4), 650-658. https://doi.org/10.1016/j.conbuildmat.2015.12.151
  4. Cho, H.C., Lee, D.H., Ju, H., Kang, S.K., Kim, K.H. and Monteiro, J.M. (2015), "Prediction of RC structure service life from field long term chloride diffusion", Comput. Concrete, 15(6), 879-902. https://doi.org/10.12989/cac.2015.15.6.879
  5. Conciatori, D., Grégoire, É., Samson, É., Marchand, J. and Chouinard, L. (2015), "Sensitivity of chloride ingress modelling in concrete to input parameter variability", Mater. Struct., 48(9), 3023-3036. https://doi.org/10.1617/s11527-014-0374-8
  6. Design Code (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, Chinese Standard, GB/T50081-2002, Beijing.
  7. Design Code (2009), Standard for Test Methods of Long-term Performance and Durability of Ordinary Concrete, Chinese Standard, GB/T50082-2009, Beijing.
  8. Foy, C., Pigeon, M. and Banthia, N. (1988), "Freeze-thaw durability and deicer salt scaling resistance of a 0.25 watercement ratio concrete", Cement Concrete Res., 18(4), 604-614. https://doi.org/10.1016/0008-8846(88)90053-1
  9. Ganjian, E. and Pouya, H.S. (2005), "Effect of magnesium and sulfate ions on durability of silica fume blended mixes exposed to sea water tidal zone", Cement Concrete Res., 35(7), 1332-1343. https://doi.org/10.1016/j.cemconres.2004.09.028
  10. Iii, W.V.S. (2015), "Stochastic service-life modeling of chlorideinduced corrosion in recycled-aggregate concrete", Cement Concrete Compos., 55(1), 103-111. https://doi.org/10.1016/j.cemconcomp.2014.09.003
  11. Malumbela, G., Moyo, P. and Alexander, M. (2012), "A Step towards standardising accelerated corrosion tests on laboratory reinforced concrete specimens", J. South Afr. Inst. Civil Eng., 54(2), 78-85.
  12. Mao, S.S., Tang, Y.C. and Wang, L.L. (2008), Reliability Statistics, High Education Press, Beijing, China.
  13. Ryan, P.C. and O'Connor, A.J. (2013), "Probabilistic analysis of the time to chloride induced corrosion for different selfcompacting concretes", Constr. Build. Mater., 47(10), 1106-1116. https://doi.org/10.1016/j.conbuildmat.2013.05.110
  14. Safehian, M. and Ramezanianpour, A.A. (2015), "Prediction of RC structure service life from field long term chloride diffusion", Comput. Concrete, 15(4), 589-606. https://doi.org/10.12989/cac.2015.15.4.589
  15. Saghafi, A., Mirhabibi, A.R. and Yari, G.H. (2009), "Improved linear regression method for estimating weibull parameters", Theor. Appl. Fract. Mech., 52(3), 180-182. https://doi.org/10.1016/j.tafmec.2009.09.007
  16. Singh, S. and Tripathi, Y.M. (2015), "Reliability sampling plans for a lognormal distribution under progressive first-failure censoring with cost constraint", Stats. Pap., 56(3), 773-817. https://doi.org/10.1007/s00362-014-0608-4
  17. Sotiriadis, K., Nikolopoulou, E. and Tsivilis, S. (2012), "Sulfate resistance of limestone cement concrete exposed to combined chloride and sulfate environment at low temperature", Cement Concrete Compos., 34(8), 903-910. https://doi.org/10.1016/j.cemconcomp.2012.05.006
  18. Strauss, A., Wendner, R., Bergmeister, K. and Costa, C. (2013), "Numerically and experimentally based reliability assessment of a concrete bridge subjected to chloride-induced deterioration", J. Infrastruct. Syst., 19(2), 166-175. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000125
  19. Tenemaza, C.E.P. and Ortega, E.M.I. (2016), "State of art, reliability in electrical distribution systems based on markov stochastic model", IEEE Lat. Am. Trans., 14(2), 799-804. https://doi.org/10.1109/TLA.2016.7437225
  20. Wang, J.C. and Yan, P.Y. (2014), "Probabilistic analysis of rebar rust in concrete under marine environment", J. Jilin. U.: Technol. Ed., 44(2), 352-357.
  21. Wang, K.J., Nelsen, D.E. and Nixon, W.A. (2006), "Damaging effects of deicing chemicals on concrete materials", Cement Concrete Compos., 28(2), 173-188. https://doi.org/10.1016/j.cemconcomp.2005.07.006
  22. Wang, Q., Wei, J., Liu, X.C. and Dong, R.Z. (2014), "A new twostaged model to predict corrosion degree of steel bars in cracked concrete area", J. Wuhan Univ. Technol.-Mater. Sci. Ed., 29(5), 960-965. https://doi.org/10.1007/s11595-014-1028-y
  23. Xu, A.C. and Tang, Y.C. (2015), "A bayesian method for planning accelerated life testing", IEEE Tran. Rel., 64(4), 1-10. https://doi.org/10.1109/TR.2015.2471416
  24. Zhang, J.X., Ma, B.C., Ran, J. and Wei, J.J. (2015), "Research on comprehensive durability of cement concrete under simulated natural condition", Concrete., 2(18), 21-25.

피인용 문헌

  1. Experimental Study of Competing Failure of Reinforced Concrete Based on the Weibull Distribution vol.7, pp.1, 2017, https://doi.org/10.1520/acem20180041
  2. Degradation reliability modeling of plain concrete for pavement under flexural fatigue loading vol.9, pp.5, 2020, https://doi.org/10.12989/acc.2020.9.5.469