DOI QR코드

DOI QR Code

Influence Regularity of Aluminum, Copper and Stainless-steel on SF6 PD Decomposition Characteristics Components

  • Zeng, Fuping (School of Electrical Engineering, Wuhan University) ;
  • Luo, Jing (School of Electrical Engineering, Wuhan University) ;
  • Tang, Ju (School of Electrical Engineering, Wuhan University) ;
  • Zhou, Qian (State Grid Chongqing Electric Power Company) ;
  • Yao, Qiang (State Grid Chongqing Electric Power Company)
  • Received : 2016.08.13
  • Accepted : 2016.10.22
  • Published : 2017.01.02

Abstract

$SF_6$ decomposition products can be used to detect partial discharge (PD), but the metal materials in a PD area can significantly affect $SF_6$ decomposition characteristics. Disregarding the effect of metal materials on such characteristics inevitably result in certain errors when using them to diagnose the internal insulation faults of gas-insulated switchgears. This paper investigates the influence regularity on the main stable decomposition components of $SF_6$ (namely $SO_2F_2$ and $SOF_2$) of the commonly metal materials uesd in GIS, such as aluminum (Al), copper (Cu) and stainless steel (SS). Firstly, an experimental platform is constructed to simulate $SF_6$ decomposition under a PD area, and the influence regularities of Al, Cu and SS on the concentration, formation rate and saturation time of $SO_2F_2$ and $SOF_2$ are obtained. Secondly, the influence mechanism of Al, Cu and SS are preliminary explored combined with the chemical activity of the metal materials.

Keywords

References

  1. Judd M D, Farish O, Hampton B F. "The excitation of UHF signals by partial discharges in GIS," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 3, pp. 213-228, 1996. https://doi.org/10.1109/94.486773
  2. IEC 60270 High-voltage test techniques-partial discharge measurement, 2000.
  3. F. Y. Chu, "$SF_6$ Decomposition in Gas-Insulated Equipement," IEEE Transactions on Electrical Insulation, vol. EI-21, p. 33, 1986.
  4. L. G Christophorou, J. K. Olthoff and R. J. Van Brunt, "Sulfur Hexafluoride and the Electric Power Industry," IEEE Electrical Insulation Magazine, vol. 13, pp. 20-24, 1997.
  5. Heise H M, Kurte R, Fischer P, et al. "Gas analysis by infrared spectroscopy as a tool for electrical fault diagnostics in $SF_6$ insulated equipment," Fresenius' Journal of Analytical Chemistry, vol. 358, pp. 793-799, 1997. https://doi.org/10.1007/s002160050511
  6. Ding W, Hayashi R, Ochi K, et al. "Analysis of PDgenerated $SF_6$ decomposition gases adsorbed on carbon nanotubes," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 13, pp. 1200-1207, 2006. https://doi.org/10.1109/TDEI.2006.258191
  7. Ju Tang, Fuping Zeng, Jianyu Pan, et al. "Correlation Analysis Between Formation Process of $SF_6$ Decomposed Components and Partial Discharge Qualities," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 20, pp. 864-875, 2013. https://doi.org/10.1109/TDEI.2013.6518956
  8. Luo Lishi, Yao Wenjun, Wang Jun, et al. "Research on partial discharge diagnosis of GIS by Decomposed Gas of $SF_6$," Power System Technology, vol. 34, pp. 225-230, 2010.
  9. Casanovas A M, Casanovas J, Lagarde F, et al. "Study of the decomposition of $SF_6$ under dc negative polarity corona discharges (point to plane geometry): Influence of the metal constituting the plane electrode," Journal of applied physics, vol. 72, pp. 3344-3354, 1992. https://doi.org/10.1063/1.351456
  10. Tang J, Liu F, Zhang X, et al. "Partial discharge recognition through an analysis of $SF_6$ decomposition products part 1: decomposition characteristics of $SF_6$ under four different partial discharges," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 19, pp. 29-36, 2012. https://doi.org/10.1109/TDEI.2012.6148499
  11. MacGregor S J, Woolsey G A, Ogle D B, et al. "The influence of electrode-fluorine reactions on corona and glow discharges in $SF_6$, " IEEE Transactions on Plasma Science, vol. 14, pp. 538-543, 1986. https://doi.org/10.1109/TPS.1986.4316586
  12. Van Brunt R J, Herron J T. "Fundamental processes of $SF_6$ decomposition and oxidation in glow and corona discharges," IEEE Transactions on Electrical Insulation, vol. 25, pp. 75-94, 1990. https://doi.org/10.1109/14.45235
  13. Beyer C, Jenett H, Klockow D. "Influence of reactive $SF_6$ gases on electrode surfaces after electrical discharges under $SF_6$ atmosphere," IEEE Transactions on Dielectrics and Electrical Insulation, vol. 7, pp. 234-240, 2000. https://doi.org/10.1109/94.841815
  14. Kurte R, Beyer C, Heise H, et al. "Application of infrared spectroscopy to monitoring gas insulated high-voltage equipment: electrode material-dependent $SF_6$ decomposition," Analytical and Bioanalytical Chemistry, vol. 373, pp. 639-646, 2002. https://doi.org/10.1007/s00216-002-1280-4
  15. Tang Ju, Li Tao, Wan Lingyun, et al. "Device of $SF_6$ dissociation apparatus under partial diacharage and gaseous decomposition components analysis system," High Voltage Engineering, vol. 34, pp. 1583-1588, 2008.
  16. Van Brunt, R. J., and J. T. Herron. "Plasma chemical model for decomposition of $SF_6$ in a negative glow corona discharge," Physica Scripta, vol. T53, pp. 9-29, 1994. https://doi.org/10.1088/0031-8949/1994/T53/002
  17. Tang J, Liu F, Zhang X, et al. "Characteristics of the Concentration Ratio of $SO_2F_2$ to $SOF_2$ as the decomomposition products of $SF_6$ under corona discharge," IEEE Transactions on Plasma Science, vol. 40, pp. 56-62, 2012. https://doi.org/10.1109/TPS.2011.2173215

Cited by

  1. Condensed species in products of the reaction of SF6 with Cu up to 4000 K vol.51, pp.2, 2018, https://doi.org/10.1088/1361-6463/aa9b73
  2. /Cu gas mixtures vol.51, pp.42, 2018, https://doi.org/10.1088/1361-6463/aadcd9