참고문헌
- Guo Zhanli, Yim YH, Kijima Shuya and Schille Jean-Philippe, The 8th Pacific Rim International Conference on Modeling of Casting and Solidification Processes, "Simulation of shrinkage defect formation in exhaust manifold castings", (2010).
- J. Galindo, P. Fajardo, R. Navarro and L.M. Garcia-Cuevas, Applied Energy, "Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modeling", 103 (2013) 116-127. https://doi.org/10.1016/j.apenergy.2012.09.013
- Jung SM, Jo YH, Jeon CW, Choi WM, Lee BJ, Oh YJ, Kim GY, Jang SS and Lee SH, Materials Science & Engineering A, "Effects of Mn and Mo addition on high-temperature tensile properties in high-Ni-containing austenitic cast steels used for turbocharger application", 682 (2017) 147-155. https://doi.org/10.1016/j.msea.2016.11.006
- E. Majchrzak and J. Mendakiewicz, Archives of Foundry Engineering, "Gradient method of cast iron latent heat identification", 7 (2007) 121-126.
- E. Majchrzak and J. Mendakiewicz, Archives of Foundry Engineering, "Identification of cast iron substitute thermal capacity", 6 (2006) 121-126.
- K. D. Carlson and C. Beckermann, International Journal of Cast Metals Research, "Determination of solid fraction-temperature relation and latent heat using full scale casting experiments: application to corrosion resistant steels and nickel based alloys", 25 (2012) 75-92. https://doi.org/10.1179/1743133611Y.0000000023
- E. Majchrzak, M. Dziewonski and G. Kaluza, Journal of Achievements in Materials and Manufacturing Engineering, "Numerical algorithm of cast steel latent heat identification", 22 (2007) 61-64.
- Giovanni Tanda, Silvia Marelli, Giulio Marmorato and Massimo Capobianco, Applied Energy, "An experimental investigation of internal heat transfer in an automotive turbocharger compressor", 193 (2017) 531-539. https://doi.org/10.1016/j.apenergy.2017.02.053
- V. Ravagliolia, N. Cavinaa, A. Cerofolinia, E. Cortia, D. Moroa and F. Ponti, Energy Procedia, "Automotive turbochargers power estimation based on speed fluctuation analysis", 82 (2015) 103-110. https://doi.org/10.1016/j.egypro.2015.11.889
- Sachin L. Nimbulkara and Rajendra S. Dalu, Perspectives in Science, "Design optimization of gating and feeding system through simulation technique for sand casting of wear plate", 8 (2016) 39-42. https://doi.org/10.1016/j.pisc.2016.03.001
- Harshil Bhatta, Rakesh Barota, Kamlesh Bhatta, Hardik Beravalaa and Jay Shah, Procedia Technology, "Design Optimization of Feeding System and Solidification Simulation for Cast Iron", 14 (2014) 357-364. https://doi.org/10.1016/j.protcy.2014.08.046
- Uday A. Dabade and Rahul C. Bhedasgaonkar, Procedia CIRP, "Casting Defect Analysis using Design of Experiments (DoE) and Computer Aided Casting Simulation Technique", 7 (2013) 616-621. https://doi.org/10.1016/j.procir.2013.06.042
- Zhizhong Suna, Henry Hua and Xiang Chenb, journal of materials processing technology, "Numerical optimization of gating system parameters for a magnesium alloy casting with multiple performance characteristics", 199 (2008) 256-264. https://doi.org/10.1016/j.jmatprotec.2007.08.036
- C. M. Choudharia, B. E. Narkhedea and S. K. Mahajanb, Procedia Materials Science, "Casting Design and Simulation of Cover Plate using AutoCAST-X Software for Defect Minimization with Experimental Validation", 6 (2014) 786-797. https://doi.org/10.1016/j.mspro.2014.07.095