References
- N. Jin, P. Clayton, 1997, Effect of Microstructure on Rolling, Sliding Wear of Low Carbon Bainitic Steels, Wear, Vol. 202, No. 2, pp. 202-207. https://doi.org/10.1016/S0043-1648(96)07271-7
- C. C. Viafara, M. I. Castro, J. M. Velez, A. Toro, 2005, Unlubricated Sliding Wear of Pearlitic and Bainitic Steels, Wear, Vol. 259, No. 1, pp. 405-411. https://doi.org/10.1016/j.wear.2005.02.013
- P. Clayton, N. Jin, 1996, Unlubricated Sliding and Rolling Sliding Wear Behavior of Continuously Cooled, Low/medium Carbon Bainitic Steels, Wear Vol. 200, No. 1-2, pp. 74-82. https://doi.org/10.1016/S0043-1648(96)07249-3
- V. Abouei, H. Saghafian, S. Kheirandish, K. Ranjbar, 2008, An Investigation of the Wear Behaviour of 0.2% C Dual Phase Steels, J. Mater. Process. Technol., Vol. 203, No. 1, pp. 107-112. https://doi.org/10.1016/j.jmatprotec.2007.09.044
- I. M. Hutchings, 1992, Tribology: Friction and Wear of Engineering Materials, Edward Arnold, London, p. 86-105
-
I. Haq, T. I. Khan, 2011, Tribological Behavior of Electrodeposited Ni-
$SnO_2$ Nano-composite Coatings on Steel, Surf. Coat. Technol., Vol. 205, No. 8, pp. 2871-2875 https://doi.org/10.1016/j.surfcoat.2010.10.059 - N. F. Garza-Montes-de-Oca, W. M. Rainforth, 2009, Wear Mechanism Experienced by a Work Roll Grade High Speed Steel Under Different Environmental Condition, Wear, Vol. 267, No. 1, pp. 441-448. https://doi.org/10.1016/j.wear.2009.01.048
- M. J. Ghazali, W. M. Rainforth, M. Z. Omar, 2007, A Comparative Study of Mechanically Mixed Layers (MMLs) Characteristics of Commercial Aluminium Alloys Sliding Against Alumina and Steel Sliders, , J. Mater. Process. Technol., Vol. 201, No. 1, pp. 662-668.
- J. L. Young, D. Kuhlmann-Wilsdorf, R. Hull, 2000, The Generation of Mechanically Mixed Layers (MMLs) during Sliding Contact and the Effects of Lubricant Thereon, Wear, Vol. 246, No. 1, pp. 74-90. https://doi.org/10.1016/S0043-1648(00)00456-7
- A. T. Alpas, J. Zhang, 1994, Effect of Microstructure (particulate size and volume fraction) and Counterface Material on the Sliding Wear Resistance of Particulatereinforced Aluminum Matrix Composites, Metall. Mater. Trans. A, Vol. 25, No. 5, pp. 969-983. https://doi.org/10.1007/BF02652272
- W. Ames, A. T. Alpas, 1995, Wear Mechanisms in Hybrid Composites of Graphite-20 Pct SiC in A356 Aluminum Alloy(Al-7 Pct Si-0.3 Pct Mg), Metall. Mater. Trans. A, Vol. 26, No. 1, pp. 85-98. https://doi.org/10.1007/BF02669796
- X. H. Cui, S. Q. Wang, F. Wang, K. M. Chen, 2008, Research on Oxidation Wear Mechanism of the Cast Steels, Wear, Vol. 265, No. 3, pp. 468-476. https://doi.org/10.1016/j.wear.2007.11.015
- Y.-S. Kim, S. H. Kang, D.H. Shin, 2006, Effect of Rolling Direction on the Microstructure and Mechanical Properties of Accumulative Roll Bonding (ARB) Processed Commercially Pure 1050 Aluminum Alloy, Mater. Sci. Forum, Vol. 503, pp. 681-686.