Structural Engineering and Mechanics

  • 제64권5호
  • /
  • Pages.579-589
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimum design of partially prestressed concrete beams using Genetic Algorithms

  • Turkeli, Erdem (Construction Department, Vocational School of Technical Sciences, Ordu University) ;
  • O zturk, Hasan Tahsin (Department of Civil Engineering, Faculty of Technology, Karadeniz Technical University)
  • 투고 : 2017.06.20
  • 심사 : 2017.08.07
  • 발행 : 2017.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the optimum cost design of partially prestressed concrete I crosssectioned beams by using Genetic Algorithms. For this purpose, the optimum cost design of two selected example problems that have different characteristics in behavior are performed via Genetic Algorithms by determining their objective functions, design variables and constraints. The results obtained from the technical literature are compared with the ones obtained from this study. The interpretation of the results show that the design of partially prestressed concrete I crossectioned beams from cost point of view by using Genetic Algorithms is 35~50 % more economical than the traditional ones (technical literature) without conceding safety.

키워드

참고문헌

  1. AASHTO (2002), Standard specifications for highway bridges. American Association of State Highway and Transportation Officials, Washington, DC.
  2. Abeles, P.W. (1967), "Design of partially prestressed concrete beams", ACI J., 64(10), 669-677.
  3. Abendroth, R.E. and Salmon, C.G. (1986), "Sensitivity study of optimum RC restrained end T-sections", J. Struct. Eng., 112(8), 1928-1943. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:8(1928)
  4. ACI 318M-02 (2002), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  5. Agrawal, G. and Bhattacharya, B. (2010), "Partial safety factor design of rectangular partially prestressed concrete beams in ultimate flexural limit state", J. Struct. Eng., 37(4), 257-267.
  6. Al-Gahtani, A.S., Al-Saadoun, S.S. and Abul-Feilat, E.A. (1995), "Design optimization of continuous partially prestressed concrete beams", Comput. Struct., 55(2), 365-370. https://doi.org/10.1016/0045-7949(94)00481-H
  7. Al-Zaid, R.Z. and Naaman, A.E. (1986), "Analysis of partially prestressed composite beams", J. Struct. Eng., 112(4), 709-725. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(709)
  8. Artar, M. (2016), "Optimum design of steel space frames under earthquake effect using harmony search", Struct. Eng. Mech., 58(3), 597-612. https://doi.org/10.12989/sem.2016.58.3.597
  9. Aydin, Z. (2006), "Optimum design of prestressed concrete bridge girders using genetic algorithm", Ph.D. Dissertation, Karadeniz Technical University, Trabzon, Turkey. (in Turkish)
  10. Chowdhury, S.H. (1999), "Damping characteristics of reinforced and partially prestressed concrete beams", Ph.D. Dissertation, Griffith University, Queensland, Australia.
  11. Cohn, M.Z. and MacRae, A.J. (1984a), "Optimization of structural concrete beams", J. Struct. Eng., 110(7), 1573-1588. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:7(1573)
  12. Cohn, M.Z. and MacRae, A.J. (1984b), "Prestressing optimization and its implications for design", PCI J., 29(4), 68-83. https://doi.org/10.15554/pcij.07011984.68.83
  13. Dede, T. and Ayvaz, Y. (2013), "Structural optimization with teaching-learning-based optimization algorithm", Struct. Eng. Mech., 47(4), 495-511. https://doi.org/10.12989/sem.2013.47.4.495
  14. Dilger, W.H. and Suri, K.M. (1986), "Steel stresses in partially prestressed concrete members", PCI J., 31(3), 88-112. https://doi.org/10.15554/pcij.05011986.88.112
  15. Du, J.S., Au, F.T., Chan, E.K. and Liu, L. (2016), "Deflection of unbonded partially prestressed concrete continuous beams", Eng. Struct., 118, 89-96. https://doi.org/10.1016/j.engstruct.2016.03.040
  16. Esfahani, M.H., Hejazi, F., Karimzadeh, K. and Siang, T. K. (2016), "Seismic behavior of partially prestressed concrete structures", Dyn. Civil Struct., 2, 255-264.
  17. GDH (2014), The list of unit costs of roads, bridges, bituminous coatings and traffic affairs, Turkish Republic Ministry of Transport, Maritime Affairs and Communications, General Directorate of Highways; Ankara, Turkey
  18. Goldberg, D.E. (1989), Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, California, USA.
  19. Han, S.H., Adamu, A. and Karihaloo, B.L. (1996), "Minimum cost design of multispan partially prestressed concrete beams using DCOC", Eng. Optim., 26(1), 35-59. https://doi.org/10.1080/03052159608941109
  20. Harajli, M.H. and Alameh, A.S. (1989), "Deflection of progressively cracking partially prestressed concrete flexural members", PCI J., 34(3), 94-127. https://doi.org/10.15554/pcij.05011989.94.128
  21. Harajli, M.H. and Hijazi, S.A. (1991), "Evaluation of the ultimate steel stress in partially prestressed concrete members", PCI J., 36(1), 62-82.
  22. Harajli, M.H. and Naaman, A.E. (1985), "Static and fatigue tests on partially prestressed beams", J Struct. Eng., 111(7), 1602-1618. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:7(1602)
  23. Karayannis, C.G. and Chalioris, C.E. (2013), "Design of partially prestressed concrete beams based on the cracking control provisions", Eng. Struct., 48, 402-416. https://doi.org/10.1016/j.engstruct.2012.09.020
  24. Kaveh, A. and Shokohi, F. (2016), "Optimum design of laterally- supported castellated beams using tug of war optimization algorithm", Struct. Eng. Mech., 58(3), 533-553. https://doi.org/10.12989/sem.2016.58.3.533
  25. Khaleel, M.A. and Itani, R.Y. (1993), "Optimization of partially prestressed concrete girders under multiple strength and serviceability criteria", Comput. Struct., 49(3), 427-438. https://doi.org/10.1016/0045-7949(93)90044-E
  26. Kutylowski, R. and Rasiak, B. (2014), "Application of topology optimization to bridge girder design", Struct. Eng. Mech., 51(1), 39-66. https://doi.org/10.12989/sem.2014.51.1.039
  27. Lee, E. H. and Park, J. (2011), "Structural design using topology and shape optimization", Struct. Eng. Mech., 38(4), 517-527. https://doi.org/10.12989/sem.2011.38.4.517
  28. Lee, K.H. (1984), "Deformation of partially prestressed concrete beams under service loads", Ph.D. Dissertation, University of Leeds, Leeds.
  29. Majumdar, A., De, A., Maity, D. and Maiti, D.K. (2013), "Damage assessment of beams from changes in natural frequencies using ant colony optimization", Struct. Eng. Mech., 45(3), 391-410. https://doi.org/10.12989/sem.2013.45.3.391
  30. MATLAB (2008), The language of technical computing, MathWorks, Massachusetts, USA.
  31. Naaman, A.E. (1977), "Ultimate analysis of prestressed and partially prestressed sections by strain compatibility", PCI J., 22(1), 32-51.
  32. Naaman, A.E. (1992), "Unified design recommendations for reinforced, prestressed, and partially prestressed concrete bending and compression members", ACI Struct. J., 89(2), 200-210.
  33. Naaman, A.E. (2012), Prestressed Concrete Analysis and Design: Fundamentals, 3rd Edition, Techno Press 3000, Ann Arbor, Michigan.
  34. Naaman, A.E. and Hamza, A.M. (1993), "Prestress losses in partially prestressed high strength concrete beams", PCI J., 38(3), 98-114. https://doi.org/10.15554/pcij.05011993.98.114
  35. Nawy, E.G. (2003), Prestressed Concrete: A Fundamental Approach, 4th Edition, Prentice Hall, Upper Saddle River, New Jersey, USA.
  36. Niğdeli, S.M., Bekdas, G., Kim, S. and Geem, Z.W. (2015), "A novel harmony search based optimization of reinforced concrete biaxially loaded columns", Struct. Eng. Mech., 54(6), 1097-1109. https://doi.org/10.12989/sem.2015.54.6.1097
  37. Nilson, A.H. (1976), "Flexural stresses after cracking in partially prestressed beams", PCI J., 21(4), 72-81.
  38. Nilson, A.H. (1987), Design of Prestressed Concrete, 2nd Edition, John Wiley & Sons, Canada.
  39. Peterson, D.N. and Tadros, M.K. (1986), "Simplified flexural design of partially prestressed concrete members", PCI J., 30(3), 50-69.
  40. Saouma, V.E. and Murad, R.S. (1984), "Partially prestressed concrete beam optimization", J. Struct. Eng., 110(3), 589-604. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:3(589)
  41. Temur, R. and Bekdaş, G. (2016), "Teaching learning-based optimization for design of cantilever retaining walls", Struct. Eng. Mech., 57(4), 763-783. https://doi.org/10.12989/sem.2016.57.4.763
  42. Toğan, V. (2013), "Design of pin jointed structures using teaching- learning based optimization", Struct. Eng. Mech., 47(2), 209-225. https://doi.org/10.12989/sem.2013.47.2.209
  43. Toğan, V. and Daloğlu, A.T. (2006), "Optimization of 3d trusses with adaptive approach in genetic algorithms", Eng. Struct., 28(7), 1019-1027. https://doi.org/10.1016/j.engstruct.2005.11.007
  44. Toğan, V., Daloglu, A. T. and Karadeniz, H. (2011), "Optimization of trusses under uncertainties with harmony search", Struct. Eng. Mech., 37(5), 543-560. https://doi.org/10.12989/sem.2011.37.5.543
  45. TS 3233 (1979), The design and construction rules for prestressed concrete structures, Turkish Standard Institute, Ankara, Turkey.
  46. TS 500 (2000), The design and construction rules for reinforced concrete structures, Turkish Standard Institute, Ankara, Turkey.
  47. Türkeli, E. (2016), "Optimum design of partially prestressed concrete beams using artificial bee colony algorithm and genetic algortihms", Ph.D. Dissertation, Karadeniz Technical University, Trabzon, Turkey. (in Turkish)
  48. Uber, A.H. (1983), "Practical design of partially prestressed concrete beams", Concrete Int., 5(4), 49-54.
  49. Xu, H.J., Liu, J.K. and Lv, Z.R. (2016), "Structural damage identification based on modified Cuckoo Search algorithm", Struct. Eng. Mech., 58(1), 163-179. https://doi.org/10.12989/sem.2016.58.1.163
  50. Zandi, Y., Akgün, Y. and Durmuş, A. (2012), "Investigating the use of high performance concrete in partially prestressed beams and optimization of partially prestressed ratio", Indian J. Sci. Technol., 5(7), 2991-2996.

피인용 문헌

  1. Response surface-based model updating to detect damage on reduced-scale masonry arch bridge vol.79, pp.1, 2021, https://doi.org/10.12989/sem.2021.79.1.009