Steel and Composite Structures

  • 제22권3호
  • /
  • Pages.589-611
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Energy-factor-based damage-control evaluation of steel MRF systems with fuses

  • Ke, Ke (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Yam, Michael C.H. (Department of Building and Real Estate, The Hong Kong Polytechnic University)
  • 투고 : 2016.08.09
  • 심사 : 2016.10.18
  • 발행 : 2016.10.30
⟨ 이전 논문 다음 논문 ⟩

초록

The primary objectives of this research are to investigate the energy factor response of steel moment resisting frame (MRF) systems equipped with fuses subject to ground motions and to develop an energy-based evaluation approach for evaluating the damage-control behavior of the system. First, the energy factor of steel MRF systems with fuses below the resilience threshold is derived utilizing the energy balance equation considering bilinear oscillators with significant post-yielding stiffness ratio, and the effect of structural nonlinearity on the energy factor is investigated by conducting a parametric study covering a wide range of parameters. A practical transformation approach is also proposed to associate the energy factor of steel MRF systems with fuses with classic design spectra based on elasto-plastic systems. Then, the energy balance is extended to structural systems, and an energy-based procedure for damage-control evaluation is proposed and a damage-control index is also derived. The approach is then applied to two types of steel MRF systems with fuses to explore the applicability for quantifying the damage-control behavior. The rationality of the proposed approach and the accuracy for identifying the damage-control behavior are demonstrated by nonlinear static analyses and incremental dynamic analyses utilizing prototype structures.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China

참고문헌

  1. Atlayan, O. and Charney, F.A. (2014), "Hybrid buckling-restrained braced frames", J. Constr. Steel. Res., 96, 95-105. https://doi.org/10.1016/j.jcsr.2014.01.001
  2. Calado, L., Proenca, J.M., Espinha, M. and Castiglioni, C.A. (2013), "Hysteretic behavior of dissipative welded fuses for earthquake resistant composite steel and concrete frames", Steel. Compos. Struct., Int. J., 14(6), 547-569. https://doi.org/10.12989/scs.2013.14.6.547
  3. Charney, F.A. and Atlayan, O. (2011), "Hybrid moment-resisting steel frames", Eng. J., 48(3), 169-182.
  4. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  5. Cimellaro, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649. https://doi.org/10.1016/j.engstruct.2010.08.008
  6. Connor, J.J., Wada, A., Iwata, M. and Huang, Y.H. (1997), "Damage-controlled structures .1. Preliminary design methodology for seismically active regions", J. Struct. Eng., 123(4), 423-431. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:4(423)
  7. De Matteis, G., Landolfo, R. and Mazzolani, F.M. (2003), "Seismic response of MR steel frames with lowyield steel shear panels", Eng. Struct., 25(2), 155-168. https://doi.org/10.1016/S0141-0296(02)00124-4
  8. Dougka, G., Dimakogianni, D. and Vayas, I. (2014a), "Innovative energy dissipation systems (FUSEIS 1-1) - Experimental analysis", J. Constr. Steel. Res., 96, 69-80. https://doi.org/10.1016/j.jcsr.2014.01.003
  9. Dougka, G, Dimakogianni, D. and Vayas, I. (2014b), "Seismic behavior of frames with innovative energy dissipation systems (FUSEIS 1-1)", Earthq. Struct., 6(5), 561-580. https://doi.org/10.12989/eas.2014.6.5.561
  10. Erochko, J., Christopoulos, C., Tremblay, R. and Choi, H. (2011), "Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05", J. Struct. Eng., 137(5), 589-599. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000296
  11. Fang, C., Yam, M.C.H., Lam, A.C.C. and Xie, L.K. (2014), "Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts", J. Constr. Steel. Res., 94, 122-136. https://doi.org/10.1016/j.jcsr.2013.11.008
  12. Farrow, K.T. and Kurama, Y.C. (2003), "SDOF demand index relationships for performance-based seismic design", Earthq. Spectra., 19(4), 799-838. https://doi.org/10.1193/1.1622955
  13. Gupta, A. and Krawinkler, H. (2000), "Dynamic P-delta effects for flexible inelastic steel structures", J Struct. Eng., 126(1), 145-154. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:1(145)
  14. Hatzigeorgiou, G.D. (2010), "Ductility demand spectra for multiple near- and far-fault earthquakes", Soil. Dyn. Earthq. Eng., 30(4), 170-183. https://doi.org/10.1016/j.soildyn.2009.10.003
  15. Hitaka, T. and Matsui, C. (2003), "Experimental study on steel shear wall with slits", J. Struct. Eng., 129(5), 586-595. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:5(586)
  16. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the First World Conference on Earthquake Engineering, Berkeley, CA, USA, June.
  17. Jiang, Y., Li, G. and Yang, D. (2010), "A modified approach of energy balance concept based multimode pushover analysis to estimate seismic demands for buildings", Eng. Struct., 32(5), 1272-1283. https://doi.org/10.1016/j.engstruct.2010.01.003
  18. Ke, K. and Chen, Y.Y. (2014), "Energy-based damage-control design of steel frames with steel slit walls", Struct. Eng. Mech., Int. J., 52(6), 1157-1176. https://doi.org/10.12989/sem.2014.52.6.1157
  19. Ke, K. and Chen, Y.Y. (2016), "Seismic performance of MRFs with high strength steel main frames and EDBs", J. Constr. Steel. Res., 126, 214-228. https://doi.org/10.1016/j.jcsr.2016.07.003
  20. Ke, K., Ke, S. and Chuan, G. (2015), "The energy factor of systems considering multiple yielding stages during ground motions", Soil. Dyn. Earthq. Eng., 71, 42-48. https://doi.org/10.1016/j.soildyn.2014.12.008
  21. Kharmale, S.B. and Ghosh, S. (2013), "Performance-based plastic design of steel plate shear walls", J. Constr. Steel. Res., 90, 85-97. https://doi.org/10.1016/j.jcsr.2013.07.029
  22. Kheyroddin, A., Khalili, A., Emami, E. and Sharbatdar, M.K. (2016), "An innovative experimental method to upgrade performance of external weak RC joints using fused steel prop plus sheets", Steel Compos. Struct., Int. J., 21(2), 443-460. https://doi.org/10.12989/scs.2016.21.2.443
  23. Lee, L.H., Han, S.W. and Oh, Y.H. (1999), "Determination of ductility factor considering different hysteretic models", Earthq. Eng. Struct. Dyn., 28(9), 957-977. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<957::AID-EQE849>3.0.CO;2-K
  24. Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energy-based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
  25. Leelataviwat, S., Saewon, W. and Goel, S.C. (2009), "Application of energy balance concept in seismic evaluation of structures", J. Struct. Eng., 135(2), 113-121. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:2(113)
  26. Li, G. and Fahnestock, L. (2012), "Seismic response of single-degree-of-freedom systems representing lowductility steel concentrically braced frames with reserve capacity", J. Struct. Eng., 139(2), 199-211.
  27. MacRae, G.A. and Kawashima, K. (1997), "Post-earthquake residual displacements of bilinear oscillators", Earthq. Eng. Struct. Dyn., 26(7), 701-716. https://doi.org/10.1002/(SICI)1096-9845(199707)26:7<701::AID-EQE671>3.0.CO;2-I
  28. Mohammadi-Gh, M. and Akrami, V. (2010) "Application of Frictional Sliding Fuse in Infilled Frames, Fuse Adjustment and Influencing Parameters", Struct. Eng. Mech., Int. J., 36(6), 715-727. https://doi.org/10.12989/sem.2010.36.6.715
  29. Moradipour, P., Chan, T.H.T. and Gallage, C. (2015), "An improved modal strain energy method for structural damage detection, 2D simulation", Struct. Eng. Mech., Int. J., 54(1), 105-119. https://doi.org/10.12989/sem.2015.54.1.105
  30. Nakashima, M., Saburi, K. and Tsuji, B. (1996), "Energy input and dissipation behaviour of structures with hysteretic dampers", Earthq. Eng. Struct. Dyn., 25(5), 483-496. https://doi.org/10.1002/(SICI)1096-9845(199605)25:5<483::AID-EQE564>3.0.CO;2-K
  31. Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, Berkeley, CA, USA.
  32. Park, J.H. (2013), "Seismic response of SDOF systems representing masonry-infilled RC frames with damping systems", Eng. Struct., 56, 1735-1750.
  33. Pekcan, G., Itani, A.M. and Linke, C. (2014), "Enhancing seismic resilience using truss girder frame systems with supplemental devices", J. Constr. Steel. Res., 94, 23-32. https://doi.org/10.1016/j.jcsr.2013.10.016
  34. Shome, N., Cornell, C.A., Bazzurro, P. and Carballo, J.E. (1998), "Earthquakes, records, and nonlinear responses", Earthq. Spectra., 14(3), 469-500. https://doi.org/10.1193/1.1586011
  35. Trifunac, M.D. (2008), "Energy of strong motion at earthquake source", Soil Dyn. Earthq. Eng., 28(1), 1-6. https://doi.org/10.1016/j.soildyn.2007.06.009
  36. Vargas, R. and Bruneau, M. (2009a), "Analytical response and design of buildings with metallic structural fuses. I", J. Struct. Eng., 135(4), 386-393. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(386)
  37. Vargas, R. and Bruneau, M. (2009b), "Experimental response of buildings designed with metallic structural fuses. II", J. Struct. Eng., 135(4), 394-403. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(394)
  38. Wada, A., Connor, J.J., Kawai, H., Iwata, M. and Watanabe, A. (1992), "Damage Tolerant Structure", Proceedings of the 5th US-Japan Workshop on the Improvement of Building Structural Design and Construction Practice, San Diego, CA, USA, September.
  39. Wang, W., Chan, T.M. and Shao, H.L. (2015), "Seismic performance of beam-column joints with SMA tendons strengthened by steel angles", J. Constr. Steel. Res., 109, 61-71. https://doi.org/10.1016/j.jcsr.2015.02.011
  40. Wongpakdee, N., Leelataviwat, S., Goel, S.C. and Liao, W. (2014), "Performance-based design and collapse evaluation of buckling restrained knee braced truss moment frames", Eng. Struct., 60, 23-31. https://doi.org/10.1016/j.engstruct.2013.12.014
  41. Yam, M.C.H., Fang, C., Lam, A.C.C. and Zhang, Y.Y. (2015), "Numerical study and practical design of beam-to-column connections with shape memory alloys", J. Constr. Steel. Res., 104, 177-192. https://doi.org/10.1016/j.jcsr.2014.10.017
  42. Ye, L.P., Lu, X.Z., Ma, Q.L., Cheng, G.Y., Song, S.Y., Miao, Z.W. and Pan, P. (2008), "Study on the influence of post-yielding stiffness to the seismic response of building structures", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  43. Zahrah, T. and Hall, W. (1984), "Earthquake energy absorption in SDOF structures", J. Struct. Eng., 110(8), 1757-1772. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:8(1757)

피인용 문헌

  1. A performance-based damage-control design procedure of hybrid steel MRFs with EDBs vol.143, 2018, https://doi.org/10.1016/j.jcsr.2017.12.011
  2. Cyclic testing of innovative two-level control system: Knee brace & vertical link in series in chevron braced steel frames vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.301
  3. A lateral load pattern based on energy evaluation for eccentrically braced frames vol.27, pp.5, 2016, https://doi.org/10.12989/scs.2018.27.5.623
  4. Effect of flexural and shear stresses simultaneously for optimized design of butterfly-shaped dampers: Computational study vol.23, pp.4, 2016, https://doi.org/10.12989/sss.2019.23.4.329
  5. Sensitivity analysis to determine seismic retrofitting column location in reinforced concrete buildings vol.78, pp.1, 2021, https://doi.org/10.12989/sem.2021.78.1.077
  6. Energy factor of high-strength-steel frames with energy dissipation bays under repeated near-field earthquakes vol.40, pp.3, 2016, https://doi.org/10.12989/scs.2021.40.3.369
  7. Hybrid steel staggered truss frame (SSTF): A probabilistic spectral energy modification coefficient surface model for damage-control evaluation and performance insights vol.45, pp.None, 2016, https://doi.org/10.1016/j.jobe.2021.103556