DOI QR코드

DOI QR Code

Detection of Axial Defects in Pipes Using Chirplet Transform

첩릿변환을 이용한 배관 축방향 결함검출

  • Kim, Young-Wann (Department of Mechanical Design Engineering, Chonnam National University) ;
  • Park, Kyung-Jo (Department of Mechanical Design Engineering, Chonnam National University)
  • 김영완 (전남대학교 기계설계공학부) ;
  • 박경조 (전남대학교 기계설계공학부)
  • Received : 2016.04.07
  • Accepted : 2016.07.25
  • Published : 2016.08.31

Abstract

The implementation of chirplet transform to locate axially aligned defects in pipes has been investigated. The results are obtained from experiments performed on a carbon steel pipe using magnetostrictive sensors. Chirplet transform is applied to the reflected signal to separate the individual modes from dispersive and multimodal waveform. The separated modes are used to calculate reflection coefficients which would be used to characterize defects. It is found that the reflection from a defect consists of the wave pulses with gradually decaying amplitudes. Also the results show that the reflection coefficient initially increases with the crack length but finally reaches an oscillating regime.

Keywords

References

  1. P. Cawley, M. S. Lowe, D. N. Alleyne and P. Wilcox, 2003, "Practical long range guided waves testing: Application to pipe and rail", Material Evaluations, Vol. 61, No. 1, pp. 66-74.
  2. K. J. Park, 2014, "Characterization of chemical sludge inside pipes using torsional guided waves", Journal of The Korean Society for Power System Engineering, Vol. 18, No. 3, pp. 29-35.
  3. A. Demma, P. Cawley and M. S. Lowe, 2003, "The reflection of the fundamental torsional mode from cracks and notches in pipes", Journal of Acoustical Society of America, Vol. 114, No. 3, pp. 611-625. https://doi.org/10.1121/1.1582439
  4. Z. Liu,, C. He, B. Wu, X. Wang and S. Yang, 2006, "Circumferential and longitudinal defect detection using T(0,1) mode excited by thickness shear mode piezoelectric elements", Ultrasonics, Vol. 44, No. 8, pp. e1135-e1138. https://doi.org/10.1016/j.ultras.2006.05.154
  5. H. Kwun, S. Y. Kim, H. Matsumoto and S. Vinogradiv, 2008, "Detection of axial cracks in tube and pipe using torsional guided waves", Review of Progress in Quantitative NDE, Vol. 27, No. 1, pp. 193-199.
  6. M. Ratassepp, S. Fletcher and M. S. Lowe, 2010, "Scattering of fundamental torsional mode at an axial crack in a pipe", Journal of Acoustical Society of America, Vol. 127, No. 2, pp. 730-740. https://doi.org/10.1121/1.3277185
  7. M. Ratassepp, M. S. Lowe and P. Cawley, 2008, "Scattering of the fundamental shear horizontal mode in a plate when incident at a through crack in the propagation direction of the mode", Journal of Acoustical Society of America, Vol. 124, No. 5, pp. 2873-2882. https://doi.org/10.1121/1.2987426
  8. H. Kwun, S. Y. Kim and M. Light, 2003, "The magnetostrictive sensor technology for long range guided wave testing and monitoring of structures", Material Evaluations, Vol. 61, No. 1, pp. 80-84.
  9. M. Tang, X. Wu, M. Cong and K. Guo, 2016, "A method based on SVD for detecting the defect using the magnetostrictive guided wave technique", Mechanical Systems and Signal Processing, Vol. 70, No. 6, pp. 601-602.
  10. C. Y. Kim and K. J. Park, 2014, "Characterization of pipe defects in torsional guided waves using chirplet transform", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 24, No. 8, pp. 636-642. https://doi.org/10.5050/KSNVE.2014.24.8.636
  11. Y. G. Kim, H. S. Moon and K. J. Park, 2011, "Generating and detecting torsional guided waves using magnetostrictive sensors of crossed coils. NDT & E International, Vol. 44, No. 2, pp. 145-151. https://doi.org/10.1016/j.ndteint.2010.11.006

Cited by

  1. Effect of Inclination Angle on Reflection Signal from Defects in Pipes vol.22, pp.3, 2018, https://doi.org/10.9726/kspse.2018.22.3.066
  2. Mode Separation and Identification of Arrival Times for Acoustic Emission Signals vol.23, pp.1, 2019, https://doi.org/10.9726/kspse.2019.23.1.057
  3. Modal Acoustic Emission Source Localization in Thin Plates with One Sensor vol.23, pp.6, 2016, https://doi.org/10.9726/kspse.2019.23.6.039
  4. Design of Self-Magnetized Magnetostrictive Sensor Using Crossed-Coils vol.24, pp.6, 2016, https://doi.org/10.9726/kspse.2020.24.6.075