Advances in Computational Design

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Shock analysis of a new ultrasonic motor subjected to half-sine acceleration pulses

  • Hou, Xiaoyan (Department of Mechanical Engineering, National University of Singapore) ;
  • Lee, Heow Pueh (Department of Mechanical Engineering, National University of Singapore) ;
  • Ong, Chong Jin (Department of Mechanical Engineering, National University of Singapore) ;
  • Lim, Siak Piang (Department of Mechanical Engineering, National University of Singapore)
  • Received : 2016.07.27
  • Accepted : 2016.10.04
  • Published : 2016.10.25
⟨ Previous Next ⟩

Abstract

This paper aims to examine the dynamic response of a newly designed ultrasonic motor under half-sine shock impulses. Impact shock was applied to the motor along x, y or z axis respectively with different pulse widths to check the sensitivity of the motor to the shocks in different directions. Finite Element Analysis (FEA) with the ANSYS software was conducted to obtain the relative displacement of a key point of the motor. Numerical results show that the maximum relative displacement is of micro meter level and the maximum stress is five orders smaller than the Young's modulus of the piezo material, which proves the robustness of the motor.

Keywords

Acknowledgement

Supported by : Agency for Science, Technology and Research (A*STAR)

References

  1. ANSYS Structural Manual (2010), ANSYS, Inc.
  2. Chan, Kwong Wah and Liao, Wei-Hsin (2008), "Shock resistance of a disk-drive assembly using piezoelectric actuators with passive damping", IEEE Trans. Magnet., 44(4), 1633-1638.
  3. Cheon, Seong-Kyu, Jeong, Seong-Su, Lee, Byeong-Ha, Park, Tae-Gone and Park, Jong-Kyu (2016), "Driving characteristics of a hexadecagon-shaped ultrasonic motor", J. Korean Phys. Soc., 68(1), 93-96. https://doi.org/10.3938/jkps.68.93
  4. Guo, Hui, Yao, Junhua, Li, Xunbo and Li, Huafeng (2012), "Mechanism analysis and output characteristics experiments of an ultrasonic motor with circumferential surface drive", J. Electroceramics, 28(2), 118-122. https://doi.org/10.1007/s10832-012-9691-x
  5. Ikeda, Takuro (1990), Fundamentals of Piezoelectricity, Oxford; New York: Oxford University Press.
  6. Ilene J Busch-Vishniac (1999), Electromechanical Sensors and Actuators, Springer, 170.
  7. Lang Brian, W. (2010), "A new American national standard for shock testing equipment", Sound Vib., 14-15.
  8. Paik, Dong-Soo, Yoo, Kyoung-Ho, Kang, Chong-Yun, Cho, Bong-Hee, Nam, Sahn and Yoon, Seok-Jin (2009), "Multilayer piezoelectric linear ultrasonic motor for camera module", J. Electroceramics, 22(1), 346-351. https://doi.org/10.1007/s10832-008-9513-3
  9. Randeraat, J.V. and Setterington, R.E. (1974), Piezoelectric Ceramics, Mullard Limited.
  10. Sashida, Toshiiku and Kenjo, Takashi (1993), An Introduction to Ultrasonic Motors, Clarendon Press-Oxford, 17-20.
  11. Shu, Dong-Wei, Shi, Bao-Jun, Meng, Hui, Yap, Fook Fah and Jiang, Da-Zhi (2007), "Shock analysis of a head actuator assembly subjected to half-sine acceleration pulses", Int. J. Impact Eng., 34(2), 253-263. https://doi.org/10.1016/j.ijimpeng.2005.07.009
  12. Uchino, Kenji (1999), Ferroelectric Devices, Marcel Dekker, 181.
  13. Vasiljev, P., Borodinas, S., Bareikis, R. and Luchinskis, R. (2008), "The square bar-shaped multi-DOF ultrasonic motor", J. Electroceramics, 20(3), 231-235. https://doi.org/10.1007/s10832-007-9182-7
  14. Xiaoyan, Hou, Pueh, Lee Heow, Jin, Ong Chong and Piang, Lim Siak (2012), "Design and finite element analysis of a new stack ultrasonic motor based on in-plane mode", Smart Mater. Struct., 21(11), article id 115002.
  15. Yang, Xiaohui, Liu, Yingxiang, Chen, Weishan and Liu, Junkao (2016), "Sandwich-type multi-degree-offreedom ultrasonic motor with hybrid excitation", IEEE Access, 4, 905-913. https://doi.org/10.1109/ACCESS.2016.2536611
  16. Zeng, Q.H. and Bogy, D.B. (2002), "Numerical simulation of shock response of disk-suspension-slider air bearing systems in Hard Disk Drives", Microsyst. Technol., 8(4-5), 289-296. https://doi.org/10.1007/s00542-002-0186-6
  17. Zhao, C.S. (2007), Ultrasonic motors technologies and application, Beijing, Science Press.

Cited by

  1. Concept and experimental validation of piezoelectric motor-based acceleration sensor in shock environment vol.30, pp.14, 2016, https://doi.org/10.1177/1045389x19853635
  2. Two rectangular elements based on analytical functions vol.5, pp.2, 2016, https://doi.org/10.12989/acd.2020.5.2.147