Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Calculation of Transmission Current-Carrying Capacity by Horizontal Arrangement Type in the Installation Methods of 154kV XLPE 600㎟ Power Cable Buried Ducts in Ground

154kV XLPE 600㎟ 지중관로 수평배열 형태별 허용전류용량 산정에 관한 연구

  • Received : 2015.10.28
  • Accepted : 2015.11.25
  • Published : 2016.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The underground transmission lines which have been built to expand the suppling facilities will be continuously accompanying with high growth of the increase of power demand in the metropolitan area in recent years. So, it is necessary to maximize the ability and reliability of power supply with the current-carrying capability of the underground transmission lines. Design criteria of KEPCO is to be presented and used frequently. But it has to be studied about the installation methods of power cable buried in ground. In this study, we used the program for calculating the current-carrying capability of underground transmission power cables. We estimated the maximum permissible current values by the horizontal arrangement in the installation methods of power cable(154kV XLPE $600mm^2$) buried ducts in ground. To see the general tendency of the analysis, we researched a statistical analysis with such parameters as the maximum permissible current values. Through the regression analysis, we analyze the most highly values of the maximum permissible current on the Ra type duct arrangement.

Keywords

References

  1. 'Development fo Backfill Materials for the Increase of Power Transmission Capacity of Underground Cables', KEPCO, 2003.12.
  2. KS C 3140(Installation Methods of Power Cables Buried in Ground), 2014.
  3. KEPCO Design Criteria, DS-6210 (Undergroun Transmission Cable), 2009.
  4. KEPCO Design Criteria, DS-5200(Ducts), 2009.
  5. KEPCO Recommended Practice for Design Criteria of Distribution-Underground, 2009.
  6. KEPCO Design Criteria, DS-5901(The Maximum Permissible Current Calculation of Underground Cable), 2009.
  7. KEPCO Standard Works Procedure, Underground Transmission Ducts, 2009.
  8. KEPCO Supervision Service Performance Criteria of Distribution Works, 2015.
  9. A study of Criteria Arrangement in the Duct Works of 154kV XLPE $2,500mm^2$ Cable, 2015.
  10. 'The Development of Program for Determining the Ampacity of Underground Transmission Cables', KEPCO, 2001.12.
  11. KEPCO Design Criteria, DS-5001(Generals), 2009.
  12. Electrical Installation Technology Criteria, Article 136(Works of Underground Power Cable), 2015.